La Crosse Technology WS-1025 Manual

La Crosse Technology Termometer WS-1025

Læs gratis den danske manual til La Crosse Technology WS-1025 (2 sider) i kategorien Termometer. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om La Crosse Technology WS-1025, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Page 3Page 2

For more product information visit: bit.ly/laxtech_support

1. Grasp both ends of the Mounting Bracket and detach it from the

Window Thermometer.

2. Use a screwdriver to open the Battery Cover and remove the

plastic tab from under the AAA battery. Thermometer should

turn on.

3. Replace Battery Cover and set the time. This will help ensure

your MIN/MAX values reset correctly.

4. Follow the mounting steps under POSITIONING for best results.

P O W E R U P S E T TI M E

OUTDOOR

W I N D OW T H E R M O M E T E R

MODEL: WS-1025U

DC: 110920

1. Hold the MODE button to enter the Settings Menu.

2. Use the + button to adjust, and MODE to confirm.

Settings Menu order:

• Hour

• Minutes

Mounting Bracket

Adhesive

Strips for

Window

Mountin

Battery Cover

1-AAA

(included)

Current

Temperature

(Fahrenheit only)

Minimum

Temperature

Resets at 8PM

Maximum

Temperature

Resets at 8AM

Buttons

Leg

Slot for

Leg

P O SI TI O NI N G

1. Select a location where the Window Thermometer will be out of

direct sunlight for accurate readings.

2. Clean your window and remove the Adhesive Strip covers from

the Mounting Bracket.

3. Firmly press the bracket onto your window surface, holding the

Adhesive Strips down for a good 30 seconds.

4. Reattach the Window Thermometer onto the Mounting Bracket.

5. For improved visibility, UV, and rain protection, slide the

included plastic plate onto the back of the thermometer.

• The minimum temperature automatically resets at 8:00 P.M.

• The maximum temperature automatically resets at 8:00 A.M.

Note: Time needs to be setcorrectly for accurate minimum and

maximum temperatures over the past 24 hours.

M I N / M A X T E M P E R AT U R E

Page 6Page 5Page | 4

WAR RANT Y I N FO

La Crosse Technology, Ltd. provides a (from date of purchase) on this product 1-year limited time warranty

relating to manufacturing defects in materials & workmanship.

La Crosse Technology, Ltd

2830 S. 26th St.

La Crosse, WI 54601

For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty

CARE + M A I NT E N AN CE

• Do not mix old and new batteries.

• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.

• Always purchase the correct size and grade of battery most suitable for intended use.

• Clean the battery contacts and also those of the device prior to battery installation.

• Ensure the batteries have with correct polarity (+ / -).

• Remove batteries from equipment that will not to be used for an extended period.

• Promptly remove expired batteries.

FCC S TAT EM ENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

CAUTION!

Any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

using electronic, mechanical or chemical process without the written permission

of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and corrections

are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or

their consequences. All trademarks and patents are recognized.

WARNING: This product can expose you to chemicals including styrene, which is known to the State of

California to cause cancer. For more information go to: www.P65Warnings.ca.gov

BUTTON FUNCTI ONS

MODE Hold to enter the Settings Menu.

+ (PLUS) Press to adjust values. Hold to increase quickly.

W E ’ R E H E R E TO H E L P !

If you require additional support, get in touch with our friendly

customer support team based out of La Crosse, WI.

Phone: 1-608-782-1610

Online: bit.ly/contact_techsupport

Our knowledgeable customer support team is available:

Monday-Friday, 8am-6pm CS .T

JOIN THE CO NVE RS ATION

Ask questions, watch detailed setup videos, and provide feedback

on our social media outlets!

SPECIF IC TIONSA

Measuring range: -13ºF to +158ºF (Fahrenheit only)

Accuracy*: 32ºF to 122ºF ± 1.8ºF, otherwise ± 2.7ºF

Resolution: 0.1ºF (0.1ºF)

Battery: 1 “AAA” LR3 alkaline battery (included)

Receiver: 3.75” L x 0.75” W x 4.00” H

*Direct sunlight may inflate temperature readings

LOW BATTERY

When the Low Battery Icon appears on the LCD, a battery

change will soon be needed.

1. Grasp both side of the thermometer and pull back ﬁrmly.

2. Use a screwdriver to remove the Battery Cover and replace the

AAA battery.

3. With the cover securely screwed back in place, reattach the

thermometer to the Mounting Bracket.

R E M OVE M OU N TI N G B R ACK E T F R OM WI ND OW

The bracket is attached via strong adhesive tape.

1. To remove, gently slide a flat blade under one of the Adhesive

Strips. Slowly and firmly pull that end away from the window.

2. Repeat step 1 with the other side of the Mounting Bracket.

Note: The adhesive will not release unless you pull slowly. You

may need to replace the adhesive tape once the mounting

bracket has been removed.

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Termometer
Model:	WS-1025

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology WS-1025 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termometer La Crosse Technology Manualer

La Crosse Technology 204-1520I Manual

5 December 2024

La Crosse Technology 104-106BL Manual

4 Oktober 2024

La Crosse Technology 104-20747MV Manual

17 September 2024

La Crosse Technology HD81762 Manual

16 September 2024

La Crosse Technology K84377 Manual

16 September 2024

La Crosse Technology HD81786 Manual

10 September 2024

La Crosse Technology 308-1409TH-11 Manual

6 September 2024

La Crosse Technology 314-519 Manual

6 September 2024

La Crosse Technology M71800 Manual

6 September 2024

La Crosse Technology 914-4928 Manual

4 September 2024

Termometer Manualer

Nyeste Termometer Manualer

Emos EGS0102 Manual

1 August 2025

Braun Sensian 3 BNT050 Manual

24 Juli 2025

Milwaukee Temp-Gun 2268-20 Manual

22 Juli 2025

Milwaukee Temp-Gun 2267-20 Manual

22 Juli 2025

Alecto BT5 Manual

21 Juli 2025

Steinberg SBS-IR-1300-16 Manual

19 Juli 2025

Comelec TN400 Manual

18 Juli 2025

Sauter JIT 200 Manual

17 Juli 2025

Laica TH1004 Manual

16 Juli 2025

Inkbird ITH-13-B Manual

16 Juli 2025