Lancom CS-8132F Manual

Lancom Skifte CS-8132F

Læs gratis den danske manual til Lancom CS-8132F (1 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Lancom CS-8132F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Hardware Quick Reference





 

Before initial startup, please make sure to take notice of the information regarding

the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby

power socket that is freely accessible at all times.

All power plugs of the device must be freely accessible.

Please note that support for third-party accessories is not provided.







Mounting & connecting

LED description & technical details



 

 

 



 



 

 

 

 



 

 



 

 

 





Use an Ethernet cable to use this out-of-band service port

for an IP interface independent of the switching plane for

management tasks or connection to a monitoring server.

In particular, this port can be used as a VPC-keepalive link

(split-brain detection).





Connect a USB stick to the USB interface to store general

configuration scripts or debug data. You can also use this

interface to upload a new firmware.





Connect the configuration interface to the USB interface of

the device you want to use for configuring / monitoring the

switch using the serial configuration cable supplied.





10G SFP+ in-band management interface

(for future use)





Insert suitable LANCOM transceiver modules into the QSFP28 interfaces 1 to 32.

Choose cables which are compatible with the transceiver modules and connect them as

described in the transceiver modules mounting instructions:

lancom-systems.com/transceiver-modules-mi.





Use the enclosed grounding bracket with screw to secure the switch against ground.





To remove a fan module in case of defect, loosen the knurled screw of the module and

remove the module from the plug-in unit. To install a new fan module, push it into the

corresponding slot. Fasten the module to the switch housing with the knurled screw.

Please note that a defective fan should be replaced within 48h.





Supply the device with power via the power supply sockets of the power supply

modules. Use the supplied power cords or a country-specific LANCOM Power Cord.

To remove the power supply module, disconnect the module from the power supply and

then pull the plug out of the module. While pressing the release lever to the left, you 

can pull the module out of the device by the handle



FAN



CS-8132F

SYS

FAN

PSO

PS1

MGMT

RESET

31 3229 3027 2825 2623 2421 2219 2017 1815 1613 1411 129 107 85 63 41 2





 

 









 

 

 

 

 

 

 

 







 



Left LED

 

 

 

Right LED

 

 

 



 

 







 









 

 

 



 



 







 









 

 

 



 

 

 





LANCOM CS-8132F

CS-8132F

SYS

FAN

PSO

PS1

MGMT

RESET

15 1613 1411 129 107 85 63 41 2





FAN











 





Produkt Specifikationer

Mærke:	Lancom
Kategori:	Skifte
Model:	CS-8132F

Har du brug for hjælp?

Hvis du har brug for hjælp til Lancom CS-8132F stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Lancom Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Lancom GS-3628XP Manual

10 Marts 2025

Lancom CS-8132F Manual

7 Oktober 2024

Lancom YS-7154CF Manual

7 Oktober 2024

Lancom IGS-3510XUP Manual

1 September 2024

Lancom XS-5116 Manual

30 August 2024

Lancom GS-1326 Manual

30 August 2024

Lancom XS-5110 Manual

30 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025

Crestron CLW-LSWEX-2GD Manual

1 April 2025

Vimar 30181.120 Manual

1 April 2025

PureTools PT-MA-HD44DA Manual

1 April 2025