Lancom XS-5116 Manual

Lancom Skifte XS-5116

Læs gratis den danske manual til Lancom XS-5116 (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 63 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 32 anmeldelser. Har du et spørgsmål om Lancom XS-5116, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

T E C H N I C A L D A T A

Hardware

Power supply Swappable power supply unit (110–230 V, 50–60 Hz)

Power consumption max. 250 watts

Environment Temperature range 0–40°C, humidity 10–90%; non-condensing

Housing Robust metal housing, 19“ 1U (442 x 44 x 375 mm > W x H x D),

network connectors on the front

Number of fans 1

Interfaces

QSFP+ 2 * QSFP+ 40 Gbps uplink ports for connection to higher-level core switches or content

servers, also congurable as stacking ports via software

SFP+ / TP-Ethernet

Combo-Ports

Each 2 * SFP+ (1 / 10 Gbps) / TP-Ethernet (1 / 2,5 / 5 / 10 Gbps) combo ports for use as

additional downlink ports or for connection to a NAS or router

SFP+ 12 * SFP+ 1 / 10 Gbps downlink ports for aggregation of subordinate access switches

Console 1 * RJ-45 / 1 * Micro USB

USB 1 * USB

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in com-

pliance with Directives 2014/30/EU and 2014/35/EU. The full text of the EU declaration of conformity is available at the

following internet address: www.lancom-systems.com/ce/

Package Content

Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Mounting brackets 2 mounting brackets for rack mounting

Power supply 1x exchangeable power supply (expandable to 2 exchangeable power supplies for redundancy

operation)

Cables 1 IEC power cord, 1 serial conguration cable, 1 micro USB conguration cable

M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E

c SFP+ ports 1G / 10 G

Off Port inactive or disabled

Green Link 10 Gbps

Green, blinking Data transfer, link 10 Gbps

Orange Link 1 Gbps

Orange, blinking Data transfer, link 1 Gbps

Conguration interfaces RJ-45 & micro USB (Console)

Connect the conguration interface a via the included serial

conguration cable to the serial interface of the device you want

to use for conguring / monitoring the switch. Alternatively use the

interface with a suitable micro USB cable.b

USB interface

Connect a USB stick to the USB interface to store general

conguration scripts or debug data.

You can also use this interface to upload a new rmware.

SFP+ interfaces 1G/10G

Insert suitable LANCOM SFP modules into the SFP+ interfaces 1

to 12. Choose cables which are compatible with the SFP modules

and connect them as described in the SFP modules mounting

instructions www.lancom-systems.com/SFP-module-MI.

SFP+ interfaces 1G/10G (combo ports)

Insert suitable LANCOM SFP modules into the SFP+ interfaces 13

to 14. Choose cables which are compatible with the SFP modules

and connect them as described in the SFP modules mounting

instructions www.lancom-systems.com/SFP-module-MI.

TP Ethernet interfaces 1G/2.5G/5G/10G (combo ports)

Connect the interfaces 13 to 14 via Ethernet cables to your PC or a

LAN switch.

QSFP+ interfaces 40G

Plug suitable LANCOM QSFP+ modules into the QSFP+

interfaces 15 to 16. Select cables suitable for the QSFP+

modules and connect them as described in the SFP modules

mounting instructions

www.lancom-systems.com/SFP-module-MI.

2 slots for power supply modules with mains connection

socket (rear panel)

To install a power supply module, remove the appropriate

module slot cover by loosening both associated screws and

insert the power supply module.

Supply the device with voltage via the power supply module

mains connector. Use the supplied power cord (not for WW

devices) or a country -specic LANCOM power cord.

To remove a power supply module, disconnect the device from

the power supply and pull the power plug out of the module.

Then push the release lever to the left. Now you can pull I

the module out of the device by the handle .J

LANCOM XS-5116QF

Quick Reference Guide

C ud eadylo -r

b Reset button

~5 sec. pressed Device restart

7~12 sec. pressed Conguration reset and device restart

b c

a System / Fan / Stack

System: green Device operational

System: red Hardware error

Fan: red Fan error

Stack: off No connection

Stack: green As master device: port activated and

connected to slave device

Stack: orange As slave device: port activated and con-

nected to master device

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document

contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111946/0720

e TP Ethernet ports 1G / 2.5G / 5G / 10G (combo ports)

Off Port inactive or disabed

Green Link 10 / 5 / 2.5 Gbps

Green, blinking Data transfer, link 10 / 5 / 2.5 Gbps

Orange Link < 2.5 Gbps

Orange, blinking Data transfer, link < 2.5 Gbps

f QSFP+ ports 40G

Off Port inactive or disabled

Green Link 40 Gbps

Gren, blinking Data transfer, link 40 Gbps

d SFP+ ports 1G / 10G (combo ports)

Off Port inactive or disabled

Green Link 10 Gbps

Green, blinking Data transfer, link 10 Gbps

Orange Link 1 Gbps

Orange, blinking Data transfer, link 1 Gbps

d e g

Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

ADo not rest any objects on top of the device and do not stack multiple devices.

A Keep the ventilation slots of the device clear of obstruction.

AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

g Power supply unit LED

Off No primary voltage supply

Green Secondary voltage supply OK

Orange Critical power supply event that causes a

shutdown: OCP, OVP, fan failure

In case of parallel primary voltage supply

by second power supply unit: power cable

disconnected or power failure

Orange, blinking Power supply warning event in which the

power supply continues to operate: high

temperature, high power, high current

consumption, slow fan

Produkt Specifikationer

Mærke:	Lancom
Kategori:	Skifte
Model:	XS-5116

Har du brug for hjælp?

Hvis du har brug for hjælp til Lancom XS-5116 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Lancom Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Lancom GS-3628XP Manual

10 Marts 2025

Lancom CS-8132F Manual

7 Oktober 2024

Lancom YS-7154CF Manual

7 Oktober 2024

Lancom IGS-3510XUP Manual

1 September 2024

Lancom XS-5116 Manual

30 August 2024

Lancom GS-1326 Manual

30 August 2024

Lancom XS-5110 Manual

30 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025

Crestron CLW-LSWEX-2GD Manual

1 April 2025

Vimar 30181.120 Manual

1 April 2025

PureTools PT-MA-HD44DA Manual

1 April 2025