LevelOne GNC-0110 Manual

LevelOne Netværkskort/adapter GNC-0110

Læs gratis den danske manual til LevelOne GNC-0110 (4 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om LevelOne GNC-0110, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

FNC / GNC Quick Installation Guide

CAUTION: Turn oﬀ and unplug the power before removing the computer's cover. Failure to do so could

endanger you and may damage the adapter or computer.

1. Turn off the computer and unplug the power cord. For Hot Plug servers, see your server documentation

ﬁrst.

2. Remove the cover bracket from a PCI-Express slot (v1.0a or newer) or a PCI (2.2 or later) slot. If you

have conﬁguration problems, see your computer's documentation to determine if the PCI-Express or PCI

slots are bus master-enabled.

3. Optional step for low proﬁle capable models:

If you need to install the adapter in a low proﬁle PCI-Express or PCI chassis, ﬁrst replace the adapter

standard bracket with the supplied low proﬁle bracket. To remove existing bracket, unscrew the two

screws as shown at right and then pull bracket off. Reverse the process to attach the low proﬁle bracket.

See the User’s Guide (step 8) for complete instructions.

4. Firmly insert the adapter into the selected slot. Push down to ensure the adapter is fully seated. If you

install the adapter in a PCI-Express or PCI slot, make sure the exposed end of the connector does not

touch any part of the motherboard. Secure the bracket to the chassis.

5. Replace the computer cover and plug in the power cord.

6. Connect the network cable Copper Modles

a. For 10Gbps opercation(10GBase-T),use category 6 or better(must be 4-pair wiring with different pitches

b. Insert the twisted pair,RJ45 network connector as shown.

c. For 1000Mbps operation(1000BaseT),use Category 5 or better (must be 4-pair wiring). Make sure you

use Category 5 cable that complies with the TIA-568 wiring speciﬁcation.

d. For 100Mbps operation(100BaseTX), use Category 5 wiring or better.

Length is limited to 100 meters.

The adapter must be connected to a compatible link partner that has the same conﬁguration.

PCI-E Slot

PCI Slot

Singe-Port Models

Dual-Port Models

Quad-Port Models

Produkt Specifikationer

Mærke:	LevelOne
Kategori:	Netværkskort/adapter
Model:	GNC-0110
Bredde:	115 mm
Dybde:	68 mm
Højde:	17 mm
Vægt:	70 g
Brugervejledning:	Ja
Produktfarve:	Aluminium
Pakkevægt:	62 g
Pakkedybde:	220 mm
Pakkebredde:	145 mm
Pakkehøjde:	30 mm
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Driftstemperatur (T-T):	0 - 55 °C
Antal:	1
Hurtig start guide:	Ja
Forbindelsesteknologi:	Ledningsført
Netværksstandarder:	IEEE 802.1Q,IEEE 802.1p,IEEE 802.3ad,IEEE 802.3x,IEEE 802.3z
LED-indikatorer:	Activity,Link
Harmoniseret systemkode (HS):	85176990
Værtsgrænseflade:	PCI Express
Grænseflade:	Fiber
Intern:	Ja
Maksimal dataoverførselshastighed:	1000 Mbit/s
Oprindelsesland:	Kina
Fiber optisk strømstik:	SFP
Fuld duplex:	Ja
Monteringsbeslag inkluderet:	Ja
Fiberkanal porte:	1
Wake-on-LAN klar:	Ja
PCI version:	1.1