LiftMaster 371LMC Manual


Læs nedenfor 📖 manual på dansk for LiftMaster 371LMC (8 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 41 personer og blev bedømt med 3.8 stjerner i gennemsnit af 21 brugere

Side 1/8
Single Button Remote Control
Model 371LM
3-Button Remote Control
Model 373LM
TO ERASE ALL CODES FROM MEMORY
SECURITY+® REMOTE CONTROLS
MODELS 371LM AND 373LM
To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:
ALWAYS keep remote controls out of reach of children. NEVER permit children to operate,
or play with remote controls.
Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are
no obstructions to door travel.
ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to
cross path of moving gate or door.
Press and hold the button
on the remote control
that you wish to use.
3
“click”
“click”
Release the button
when the garage
door opener lights
blink two clicks or
are heard.
If programming to
other products,
press the button a
second time to
activate the product.
1
Locate the
Smart/Learn
button. Press and
immediately release
the learn button.
The learn LED will glow
steadily for 30 seconds.
Within 30 seconds...
2
PROGRAMMING THE REMOTE CONTROL
For use with garage door openers, gate operators or other products that are 315 MHz Security+
®.
Compatible with garage door openers that have a learn button. The code between the remote purple
control and the receiver changes with each use, randomly accessing over a billion new codes. Refer
to your product manual for the location of the learn button.
NOTE: Your product may look different than the products illustrated in this manual.
TO CONTROL THE GARAGE DOOR OPENER LIGHTS
With the door closed,
press and hold
the remote
control button
that you want to
control the light.
LOCK
LIGHT
Press and
hold the
light button
on the
door control.
1
+
LOCK
LIGHT
Press and
hold the
lock button
on the
door control.
After the garage
door opener
lights flash,
release all
buttons.
+
2 3
“click”
“click”
This feature is only available on garage door openers equipped with a multi-function door control and a remote control with more than one button. Not available with universal receiver.
With Security+® remote controls, a remote control button can be programmed to operate the garage door opener lights without opening the door.
Test by pressing the remote control button. The garage door opener lights should turn on or off but the door should not move.
When deactivating any unwanted remote control code, all previous codes will be erased.
1
Press and hold the learn button
on garage door opener or other
product until the learn LED goes
out (approximately 6 seconds).
All previous codes are now erased.
Reprogram each remote control
you wish to use.
WARNING: This product can expose you to chemicals including lead, which are known to the State
of California to cause cancer or birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
REPLACEMENT PARTS
3V CR2032 Lithium battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10A20
Visor Clip (not available for mini-remote controls). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29B137
ONE YEAR LIMITED WARRANTY
LiftMaster warrants to the first retail purchaser of this product that is free from defect in materials
and/or workmanship for a period of 1 year from the date of purchase.
3-BUTTON REMOTE CONTROLS
Additional buttons on any Security+
® remote control or mini-remote control can be programmed
to operate other Security+® garage door openers, light controls, gate operators or access control
systems.
HOW TO USE THE REMOTE CONTROL
Press and hold the button down until the door or gate starts to move. The remote control will
operate from up to 3 car lengths away on typical installations.
Installations and conditions vary, contact an installing dealer for more information.
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment
or modifications of this receiver and/or transmitter are prohibited, except for
changing the code setting or replacing the battery. THERE ARE
NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
To prevent possible SERIOUS INJURY or DEATH:
NEVER allow small children near batteries.
If battery is swallowed, immediately notify doctor.
To reduce risk of fire, explosion or chemical burn:
Replace ONLY with 3V CR2032 coin batteries.
DO NOT recharge, disassemble, heat above 212°F
(100°C) or incinerate.
12 3 4
3V CR2032
Use the visor clip or
screwdriver to pry open
the cover.
Remove the old battery.
Dispose of old batteries
properly.
Insert replacement batteries
positive side up. Replace
the batteries with only
3V CR2032 coin cell
batteries.
Replace cover.
THE REMOTE CONTROL BATTERY
The lithium battery should produce power for up to 3 years. To replace battery:


Produkt Specifikationer

Mærke: LiftMaster
Kategori: Ikke kategoriseret
Model: 371LMC

Har du brug for hjælp?

Hvis du har brug for hjælp til LiftMaster 371LMC stil et spørgsmål nedenfor, og andre brugere vil svare dig