LiftMaster LA412UL Manual

LiftMaster Ikke kategoriseret LA412UL

Læs gratis den danske manual til LiftMaster LA412UL (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om LiftMaster LA412UL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Doc 6001309 (01-20289) Page 1 of 2 Rev A

Use the following procedure to remove and replace a LiftMaster Swing Gate Operator cover:

WARNING

Failure to follow the instructions in Step 1 may cause injury due to unexpected gate movement.

Always wait one minute after power-off to service the gate.

1. Turn off power to the gate operator at the circuit breaker and wait for one minute. The gate

will move after one minute if system has the Power Fail Option.

2. When you are certain that the gate will not move due to Power Fail Option operation:

A) Disconnect the Drag Link from the gate Anchor.

B) Loosen the locking nut and mounting bolt, then remove the Swing Arm Cap Assembly and

Drag Link Assembly from the drive shaft. Set this assembly aside.

3. Remove the four cover mounting bolts and remove the gate operator cover.

4. If new cover has optional door: Remove the two top mounting screws from the control box clear

plastic cover. NOTE: These screws must be removed or the control box clear plastic cover cannot

be removed through the gate operator cover door.

5. Install the new gate operator cover and secure with mounting hardware.

6. Reinstall the Drag Link, Swing Arm and Swing Arm Cap Assemblies.

7. Turn on power to the gate operator at the circuit breaker.

Swing Gate Cover Removal and Installation.

SWING GATE OPERATOR COVER

REMOVAL AND INSTALLATION

(WITH OR WITHOUT DOOR)

This document is protected by copyright and may not be copied or adapted without the prior written consent of

LiftMaster. This documentation contains information proprietary to LiftMaster and such information may not be

distributed without the prior written consent of LiftMaster. The software and firmware included in the LiftMaster

product as they relate to this documentation are also protected by copyright and contain information proprietary

to LiftMaster.

FOR TECHNICAL SUPPORT

Call our toll free numbers:

(800) 323-2276

(800) 998-9197

Installation and service information is

available six days a week.

TO ORDER REPAIR PARTS

Call our toll free numbers:

(800) 528-2806

(800) 998-9197

Prepare to provide the following

information when ordering repair parts:

 Part Number

 Part Name

 Model Number

Produkt Specifikationer

Mærke:	LiftMaster
Kategori:	Ikke kategoriseret
Model:	LA412UL

Har du brug for hjælp?

Hvis du har brug for hjælp til LiftMaster LA412UL stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret LiftMaster Manualer

LiftMaster 041-0405-000 Manual

15 Juni 2025

LiftMaster LMHNTG Manual

4 September 2024

LiftMaster CAPXSTKPL Manual

3 September 2024

LiftMaster BG790 Manual

3 September 2024

LiftMaster 64LM Manual

3 September 2024

LiftMaster CAPXSHOOD Manual

28 August 2024

LiftMaster myQ-SGC2WCH Manual

21 August 2024

LiftMaster CAPXS Manual

21 August 2024

LiftMaster MGJ5011U Manual

21 August 2024

LiftMaster LMWEKITU Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Grundig GIEI827578PN Manual

1 August 2025

Finlux FC-550mmW Manual

1 August 2025

Thermaltake Toughpower PF3 Platinum Manual

1 August 2025

Olivetti d-Copia 4524MFplus Manual

1 August 2025

Grundig GEBD19401BPH Manual

1 August 2025

Thermaltake Max 3504 Manual

1 August 2025

Tripp Lite N286-100G-SR4SA Manual

1 August 2025

Tripp Lite Protect It! TLP88USBB Manual

1 August 2025

Tripp Lite Protect It! TLP664USBB Manual

1 August 2025

Silver Cross Tide Manual

1 August 2025