LiftMaster TLS1CARD Manual

LiftMaster Ikke kategoriseret TLS1CARD

Læs gratis den danske manual til LiftMaster TLS1CARD (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om LiftMaster TLS1CARD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

TLS1CARD

TIMER LIGHT STATUS OPTION CARD

The TLS1CARD has different configuration modes that determine how the TLS1CARD will function.

MODE COMPARABLE MODIFICATION DESCRIPTION

90-T1, 90-515774, or RDGRNCARD • 3 relay outputs (R1, R2, and R3) with optional flashing for R1TCP Mode 1

• Adjustable Pre-Warning

• R1 output on during Pre-Warning, while in motion, and at an

undefined stopped position

• R2 output on at fully open and at open mid-stop

• R3 output on while closing only

90-T2 • 3 relay outputs (R1, R2, and R3)TCP Mode 2

• Adjustable Pre-Warning

• R1 output on during Pre-Warning only

• R2 output on at fully open

• R3 output on only when a special input to open has been used to

open the door which does not activate the Timer-to-Close

TCP Mode 3 90-T4 • 3 relay outputs (R1, R2, and R3)

• Adjustable Pre-Warning

• R1 output on during Pre-Warning only

• R2 output on at fully open and at open mid-stop

• R3 output on while in motion

90-RGLFCIR or 90-HDFLASH2 • TCP Mode 4 2 relay outputs (R1, R2) with optional flashing for R1

• Adjustable Pre-Warning

• R1 output on during Pre-Warning and while closing

• R2 output on at fully open

90-T3 • 3 relay outputs (R1, R2, and R3)TCP Mode 5

• Adjustable Pre-Warning

• R1 output on at all times except fully open and fully closed

• R2 output on at fully open

• R3 output on only when a special input to open has been used to

open the door which does not activate the Timer-to-Close

90-L3FLASH • 3 relay outputs (R1, R2, and R3) with optional flashing for R1TC Mode 1

• R1 output on while in motion

• R2 output on at fully open and at open mid-stop

• R3 output on at fully open, open mid-stop, and at an undefined

stopped position

90-42104 This mode allows a second set of external, track mounted limits to act SP Mode 1

as primary or backup for the operator’s open, close, and safety limits.

NOTE: It is not required that all three inputs have a switch connected to

the TLS1CARD. Either the external close, external safety, external open,

or all three may be used.

TIMER FUNCTIONS

Timer-to-Close (TTC): The TTC is an adjustable setting that can be set to automatically close the

door after a specified period of time (Figure 1).

Timer-to-Close (TTC) with Pre-Warning: The TTC is an adjustable setting that can be set to

automatically close the door after a specified period of time. Pre-Warning is a separate adjustable

setting that will activate an auxiliary device for a specified period of time before the door starts to

close (Figure 2).

INTRODUCTION

TTC

starts

FIGURE 1: TIMER-TO-CLOSE (TTC)

Door starts

to close

EXAMPLE: TTC set

to 45 seconds.

FIGURE 2: TIMER-TO-CLOSE (TTC)

WITH PRE-WARNING

EXAMPLE: TTC set

to 45 seconds and

Pre-Warning set

to 15 seconds.

TTC

starts

Pre-Warning starts

Stage 1

Stage 2

Door starts

to close

WARNINGS

To prevent possible SERIOUS INJURY or DEATH from

electrocution, disconnect electric power to operator BEFORE

installing.

ALL electrical connections MUST be made by a qualified

individual.

WARNING

To prevent possible PROPERTY DAMAGE, ACCIDENTAL

ENTRAPMENT, SEVERE INJURY, or DEATH:

• Disconnect power to the operator and fully open or close the

door BEFORE installing ANY entrapment protection devices.

• LiftMaster Monitored Entrapment Protection (LMEP) devices

MUST be installed for all wiring types except constant

pressure to close. However, LiftMaster Monitored Entrapment

Protection (LMEP) devices are recommended for constant

pressure to close.

• LiftMaster Monitored Entrapment Protection (LMEP) devices

MUST be installed when a radio is used.

• LiftMaster Commercial Door Operators require that ONLY

LiftMaster Monitored Entrapment Protection (LMEP) devices

be installed. Installing devices other than LiftMaster Monitored

Entrapment Protection (LMEP) devices will void the warranty.

WARNING

APPLICATION

For use with Logic 4 Industrial Duty and Heavy Industrial Duty Operators.

When installed in a Logic 4 (L4) operator, the Timer Light Status Option Card (TLS1CARD) provides special functionality to control

auxiliary devices such as lights, bells, horns, horn/strobes, etc. at various door positions. The TLS1CARD also provides special timer

functions that are described in more detail on the following pages.

NOTE: Only one TLS1CARD can be used within the Logic 4 operator however it can be used in conjunction with other option cards such

as the AUXCARD, FDRCARD, or CPS3.

Produkt Specifikationer

Mærke:	LiftMaster
Kategori:	Ikke kategoriseret
Model:	TLS1CARD

Har du brug for hjælp?

Hvis du har brug for hjælp til LiftMaster TLS1CARD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret LiftMaster Manualer

LiftMaster 041-0405-000 Manual

15 Juni 2025

LiftMaster LMHNTG Manual

4 September 2024

LiftMaster CAPXSTKPL Manual

3 September 2024

LiftMaster BG790 Manual

3 September 2024

LiftMaster 64LM Manual

3 September 2024

LiftMaster CAPXSHOOD Manual

28 August 2024

LiftMaster myQ-SGC2WCH Manual

21 August 2024

LiftMaster CAPXS Manual

21 August 2024

LiftMaster MGJ5011U Manual

21 August 2024

LiftMaster LMWEKITU Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 300004 Manual

16 Juni 2025

Playtive IAN 321241 Manual

16 Juni 2025

Cleveland 24CEA10 Manual

16 Juni 2025

Hughes & Kettner Redbox Pro Manual

16 Juni 2025

Playtive IAN 279576 Manual

16 Juni 2025

Playtive IAN 321903 Manual

16 Juni 2025

Wahoo RPM Cadence Manual

16 Juni 2025

Playtive IAN 359564 Manual

16 Juni 2025

Playtive IAN 272426 Manual

16 Juni 2025

Playtive IAN 321236 Manual

16 Juni 2025