Lincoln Electric Activ8X Manual

Lincoln Electric Ikke kategoriseret Activ8X

Læs gratis den danske manual til Lincoln Electric Activ8X (35 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Lincoln Electric Activ8X, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/35

Operator’s Manual

www.lincolnelectric.com/register

Authorized Service and Distributor Locator:

www.lincolnelectric.com/locator

IM10458-B | Issue D

ate Jul-22

For use with machines having Code Numbers:

12759, 12877

Save for future reference

Date Purchased

Code: (ex: 10859)

Serial: (ex: U1060512345)

Activ8X

™

SECTION A:

WARNINGS

CALIFORNIA PROPOSITION 65 WARNINGS

WARNING: Breathing diesel engine exhaust

exposes you to chemicals known to the State

of California to cause cancer and birth defects,

or other reproductive harm.

• Always start and operate the engine in a

well-ventilated area.

• If in an exposed area, vent the exhaust to the outside.

• Do not modify or tamper with the exhaust system.

• Do not idle the engine except as necessary.

For more information go to

www.P65 warnings.ca.gov/diesel

WAR his proNING: T duct, when use d o l f r we ding or

cutt ucesin prg, od fumes asesor g inwhich conta

chem ca kni ls own t fo the State o Cal o seif rnia to cau

birth efects and cases cancer d , in some , . (California

Health et & Saf y odC e § 2 5 5249. et seq.)

WARNING: Cancer and Reproductive Harm

www.P65warnings.ca.gov

ARC WELDING CAN BE HAZARDOUS. PROTECT

YOURSELF AND OTHERS FROM POSSIBLE SERIOUS

INJURY OR DEATH. KEEP CHILDREN AWAY.

PACEMAKER WEARERS SHOULD CONSULT WITH

THEIR DOCTOR BEFORE OPERATING.

Read and understand the following safety highlights. For

additional safety information, it is strongly recommended

that you purchase a copy of “Safety in Welding & Cutting -

ANSI Standard Z49.1” from the American Welding Society,

P.O. Box 351040, Miami, Florida 33135 or CSA Standard

W117.2. A Free copy of “Arc Welding Safety” booklet E205

is available from the Lincoln Electric Company, 22801

St. Clair Avenue, Cleveland, Ohio 44117-1199.

BE SURE THAT ALL INSTALLATION, OPERATION,

MAINTENANCE AND REPAIR PROCEDURES ARE

PERFORMED ONLY BY QUALIFIED INDIVIDUALS.

FOR ENGINE POWERED

EQUIPMENT.

1.a. Turn the engine off before troubleshooting

and maintenance work unless the

maintenance work requires it to be running.

1.b. Operate engines in open, well-ventilated areas or vent the engine

exhaust fumes outdoors.

arc or when the engine is running. Stop the

engine and allow it to cool before refueling to

prevent spilled fuel from vaporizing on contact

tank. If fuel is spilled, wipe it up and do not start engine until

fumes have been eliminated.

1.d. Keep all equipment safety guards, covers

and devices in position and in good repair.

Keep hands, hair, clothing and tools away

from V-belts, gears, fans and all other

moving parts when starting, operating or

repairing equipment.

1.e. In some cases it may be necessary to remove safety guards to

perform required maintenance. Remove guards only when

necessary and replace them when the maintenance requiring

their removal is complete. Always use the greatest care when

working near moving parts.

1.f. Do not put your hands near the engine fan. Do not attempt to

override the governor or idler by pushing on the throttle control

rods while the engine is running.

1.g. To prevent accidentally starting gasoline engines while turning

the engine or welding generator during maintenance work,

disconnect the spark plug wires, distributor cap or magneto wire

as appropriate.

1.h. To avoid scalding, do not remove the radiator

pressure cap when the engine is hot.

ELECTRIC AND

MAGNETIC FIELDS MAY

BE DANGEROUS

causes localized Electric and Magnetic Fields (EMF).

and welding machines

welders having a pacemaker should consult their physician

before welding.

which are now not known.

2.d. All welders should use the following procedures in order to

2.d.1. Route the electrode and work cables together - Secure

them with tape when possible.

2.d.2. Never coil the electrode lead around your body.

2.d.3. Do not place your body between the electrode and work

cables. If the electrode cable is on your right side, the

work cable should also be on your right side.

2.d.4. Connect the work cable to the workpiece as close as pos-

sible to the area being welded.

2.d.5. Do not work next to welding power source.

SAFETY

Safety 02 of 04 - 10/08/2021

1.c. Do not add the fuel near an open ame welding

with hot engine parts and igniting. Do not spill fuel when lling

2.a. Electric current owing through any conductor

Welding current creates EMF elds around welding cables

2.b. EMF elds may interfere with some pacemakers, and

2.c. Exposure to EMF elds in welding may have other health effects

minimize exposure to EMF elds from the welding circuit:

1.i. Using a generator indoors CAN KILL YOU IN

MINUTES.

1.j. Generator exhaust contains carbon monoxide. This is a poison

you cannot see or smell.

1.k. NEVER use inside a home or garage,

EVEN IF doors and windows are open.

1.l. Only use OUTSIDE and far away from

windows, doors and vents.

1.m. Avoid other generator hazards. READ

MANUAL BEFORE USE.

Produkt Specifikationer

Mærke:	Lincoln Electric
Kategori:	Ikke kategoriseret
Model:	Activ8X

Har du brug for hjælp?

Hvis du har brug for hjælp til Lincoln Electric Activ8X stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Lincoln Electric Manualer

Lincoln Electric Linc-Cut 3015 CNC Fiber Laser Manual

20 Juli 2025

Lincoln Electric POWER MIG 255XT Manual

19 Juli 2025

Lincoln Electric LINCGUN PROMIG AIR 230T Manual

14 Marts 2025

Lincoln Electric LINCGUN PROMIG WATER 330W Manual

14 Marts 2025

Lincoln Electric VRTEX Engage Manual

11 Januar 2025

Lincoln Electric CHAMELEON 3V0 Manual

4 Januar 2025

Lincoln Electric Prism Wall Mount Manual

9 December 2024

Lincoln Electric COOLERTIG 4 Manual

9 December 2024

Lincoln Electric Oil Guardian Manual

9 December 2024

Lincoln Electric Inferno Torch KH825 Manual

9 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech EAI-3100 Manual

30 Juli 2025

Deye SUN-M180G4-EU-Q0-I Manual

30 Juli 2025

Crestron STIRP Manual

30 Juli 2025

Intellinet 790741 Manual

30 Juli 2025

Saris Edge 2-Bike Manual

30 Juli 2025

Advantech ROM-3310 Manual

30 Juli 2025

Advantech EKI-1751I Manual

30 Juli 2025

Advantech ICR-1601W Manual

30 Juli 2025

C2G 29341 Manual

30 Juli 2025

Advantech ITA-8120 Manual

30 Juli 2025