Luxul AGS-1016 Manual

Luxul Skifte AGS-1016

Læs gratis den danske manual til Luxul AGS-1016 (8 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Luxul AGS-1016, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Fo ld Fo ld Fo ld
READ ME FIRST
QUICK INSTALL GUIDE
16-Port Gigabit Switch
AGS-1016
Includes:
16-Port Gigabit Switch
Rack Mount Kit
Rubber Feet
Power Cord
SETUP AND CONFIGURATION
1
Physical Installation
The AGS-1016 can be rack-mounted or used as a desktop switch. Install the
AGS-1016 in a stable/safe place to avoid any possible damage. Avoid placement
in direct sunlight. Do not place heavy articles on the AGS-1016 and verify the
ground connection of the outlet is functioning properly.
Desktop/Shelf Installation
For desktop/shelf installation, attach the four rubber feet to the corner inden-
tations on the bottom of the AGS-1016, then place the switch horizontally on
a solid, level platform.
Rack Installation
Use the included L brackets for convenient installation in a 19-inch server or
audio/video rack. Use four screws to attach the L-shaped brackets on both
sides of the AGS-1016 as shown below, then install the switch horizontally in the
rack. Use your desired hardware to ax the switch brackets to the rack.
Attach Feet for Desktop Installation Install Brackets for Rack-Mounting
2
Connecting Ethernet and Power
Ethernet and Power Connections
Use any RJ-45 to connect the AGS-1016 to an Ethernet-enabled device,
including servers, routers or other switches. No crossover cable is necessary.
The AGS-1016 supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/
full-duplex mode and 1000 Mbps full-duplex mode.
Use the included power cable to connect the AGS-1016 to a surge protected
outlet. The AC input socket and a power switch are on the rear panel. The
built-in power supply supports 100~240VAC at 50/60Hz.
c CAUTION: Use only the correct power cord for your environment.
Any voltage other than standard 100/240 will result in
damage to the AGS-1016.
Sales
P: 801-822-5450
E: sales@luxul.com
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
LUX-QIG-AGS-1016-v4 06271701
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is
granted, either expressly or by implication or otherwise under any Luxul intellectual property rights. An
implied license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2017 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and
Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other
trademarks and registered trademarks are property of their respective holders.
Fo ld Fo ld Fo ld
READ ME FIRST
QUICK INSTALL GUIDE
16-Port Gigabit Switch
AGS-1016
Includes:
16-Port Gigabit Switch
Rack Mount Kit
Rubber Feet
Power Cord
SETUP AND CONFIGURATION
1
Physical Installation
The AGS-1016 can be rack-mounted or used as a desktop switch. Install the
AGS-1016 in a stable/safe place to avoid any possible damage. Avoid placement
in direct sunlight. Do not place heavy articles on the AGS-1016 and verify the
ground connection of the outlet is functioning properly.
Desktop/Shelf Installation
For desktop/shelf installation, attach the four rubber feet to the corner inden-
tations on the bottom of the AGS-1016, then place the switch horizontally on
a solid, level platform.
Rack Installation
Use the included L brackets for convenient installation in a 19-inch server or
audio/video rack. Use four screws to attach the L-shaped brackets on both
sides of the AGS-1016 as shown below, then install the switch horizontally in the
rack. Use your desired hardware to ax the switch brackets to the rack.
Attach Feet for Desktop Installation Install Brackets for Rack-Mounting
2
Connecting Ethernet and Power
Ethernet and Power Connections
Use any RJ-45 to connect the AGS-1016 to an Ethernet-enabled device,
including servers, routers or other switches. No crossover cable is necessary.
The AGS-1016 supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/
full-duplex mode and 1000 Mbps full-duplex mode.
Use the included power cable to connect the AGS-1016 to a surge protected
outlet. The AC input socket and a power switch are on the rear panel. The
built-in power supply supports 100~240VAC at 50/60Hz.
c CAUTION: Use only the correct power cord for your environment.
Any voltage other than standard 100/240 will result in
damage to the AGS-1016.
Sales
P: 801-822-5450
E: sales@luxul.com
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
LUX-QIG-AGS-1016-v4 06271701
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is
granted, either expressly or by implication or otherwise under any Luxul intellectual property rights. An
implied license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2017 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and
Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other
trademarks and registered trademarks are property of their respective holders.

Produkt Specifikationer

Mærke: Luxul
Kategori: Skifte
Model: AGS-1016

Har du brug for hjælp?

Hvis du har brug for hjælp til Luxul AGS-1016 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skifte Luxul Manualer

Luxul

Luxul XMS-5248P Manual

13 Januar 2025
Luxul

Luxul AMS-2624P Manual

13 Januar 2025
Luxul

Luxul XGS-1005 Manual

13 Januar 2025
Luxul

Luxul AGS-1008M Manual

13 Januar 2025
Luxul

Luxul XMS-1208P Manual

13 Januar 2025
Luxul

Luxul XMS-7048P Manual

13 Januar 2025
Luxul

Luxul AMS-2600 Manual

13 Januar 2025
Luxul

Luxul AGS-1016 Manual

13 Januar 2025
Luxul

Luxul XMS-2624P Manual

13 Januar 2025
Luxul

Luxul AMS-1816P Manual

13 Januar 2025

Skifte Manualer

Nyeste Skifte Manualer

Lancom

Lancom GS-2412 Manual

4 April 2025
Lancom

Lancom GS-2412P Manual

4 April 2025
Lancom

Lancom GS-2426 Manual

4 April 2025
Hager

Hager ARF970D Manual

3 April 2025
Hager

Hager ARF920D Manual

3 April 2025
Roline

Roline 14.01.3579 Manual

2 April 2025
Fantini Cosmi

Fantini Cosmi B12BN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12DN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12GN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12HN Manual

1 April 2025