LYYT ISRF1 Manual

LYYT Controller ISRF1

Læs gratis den danske manual til LYYT ISRF1 (2 sider) i kategorien Controller. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om LYYT ISRF1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ISRF1

IN-LINE WIRELESS CONTROLLER

FOR SINGLE COLOUR LED TAPE

Item ref: 153.796UK

User Manual

WARNING: This product intended for professional installation of single colour LED tape and should be is

connected by qualified personnel in accordance with electrical safety standards. Ensure that the rated load

indicated is not exceeded.

Installation

The IS 1 controller can be employed to control single colour LED tape operating from a RF

5-24Vdc power supply. Maximum short term current load is rated at 12A.

For constant full power output, it is advised to limit this to 6A load.

For Lyyt single colour LED tape (156.705-1 6. 68UK), is recommended to connect no 5 7 it

more than 3 5m tapes radially from the same controller. When connecting more than one x

5m tape in this way, it will be necessary to remove the connectors and strip the wires for DC

connec using termina strips. I is also advised to use bypass wiring instead o connecting tion l t f

end- -end to avoid noticeable voltage drop at the furthes end fro the powe supply. to t m r

153.796 User Manual UK

Remote control

1. POWER LED on / standby button

2. LIGHT switches from pattern to static light mode

3. 100% sets static light brightness to 100%

4. MODE+ steps upwards through modes

5. SPEED- reduces speed of pattern

6. MODE- steps downwards through modes

7. BRIGHT+ increases brightness

8. BRIGHT- decreases brightness

9. 50% sets static light brightness to 50%

10. 25% sets static light brightness to 25%

11. SPEED+ increases speed of pattern



Remove the clear tab from the handheld remote to engage the battery (replacement CR2025 button cell)



To switch LEDs on, press the POWER button (from standby, the last setting is resumed)



If there is no response from the handset, it may be necessary to pair the handset to the controller (see “ ” below)Pairing



MODE+ and - buttons step through the 8 preset programmes in sequence (shown below)



SPEED+ or - will alter the rate of change in the selected mode



LIGHT button overrides the pattern mode to give a static light setting



BRIGHT+ or - will change the brightness in static mode



Preset brightness can be jumped to via the 25%, 50% or 100% buttons



Press POWER to enter standby mode (all LEDs off)

Pairing : If the LED controller does not respond to the RF remote handset, disconnect DC power from the controller.

Reconnect the DC power to the controller and hold down the “100%” and “25%” buttons simultaneously.

The controller and handset should now be paired and the controller should respond to the handset.

Preset

Name

Description

Random Glow

Fade in and out at random brightness & intervals

Regular Glow

Fade between fully on and off at a regular rate

Half Glow

Fade between fully on and half-on at a regular rate

Flicker

Flash on and off at a fast regular rate

Offset Flash

Flash on and off with pause at a regular rate

Even Flash

Flash on and off evenly at a regular rate

SOS

3 short - 3 long - 3 short Morse Code flash sequence

Strobe

Very short burst at regular intervals

Specifications

Power supply

5-24Vdc, 12A (50% duty cycle) or 6A (100% duty cycle)

Remote control frequency

433MHz

Lead length (power input, LED output)

100mm

Connections

DC5521 connectors

Controller dimensions

42 x 13 x 5mm

Weight

4.8g

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Produkt Specifikationer

Mærke:	LYYT
Kategori:	Controller
Model:	ISRF1

Har du brug for hjælp?

Hvis du har brug for hjælp til LYYT ISRF1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Controller LYYT Manualer

LYYT LTC22IR Manual

14 August 2024

LYYT PS60 Manual

13 August 2024

LYYT A2-A1818C Manual

13 August 2024

LYYT ISRF1 Manual

13 August 2024

LYYT AL1-W2915 Manual

11 August 2024

LYYT IMDC1 Manual

11 August 2024

LYYT AL2-C1709 Manual

10 August 2024

LYYT LTC44IR Manual

10 August 2024

LYYT AL1-C2311 Manual

8 August 2024

LYYT PS45-24 Manual

6 August 2024

Controller Manualer

Nyeste Controller Manualer

IPEGA PG-9055 Manual

11 Februar 2025

Rosco Control Box Manual

30 Januar 2025

DJI Motion Controller Manual

14 Januar 2025

8BitDo Ultimate C Wired Controller Xbox Manual

11 Januar 2025

Sonance VC30R Manual

8 Januar 2025

BeamZ WTR10-5 Manual

5 Januar 2025

Somfy Keypad 2 RTS Manual

1 Januar 2025

Somfy Keypop RTS Manual

1 Januar 2025

Somfy Wall Switch 3 RTS Manual

1 Januar 2025

Logitech Driving Force Shifter Manual

31 December 2025