Abo gu e ut this id
Before you start using the Macally BTDYNAMOUSE,
be sure to read this guide in its entirety.
Safety intructions
Package contents
• BTDYNAMOUSE
• 2 AAA batteries
• User guide
Hardware basics
Installation instructions
Thank you for purchasing the Macally
BTDYNAMOUSE. Sensitive, soft, silent, smooth,
stylish and slim...all words that define the Macally
BTDYNAMOUSE Bluetooth optical silent click
mouse for Mac and PC. This mouse has a DPI
button that allows you to switch between a sensor
resolution of 600, 1000 and 1200 DPI so you can set
the tracking speed and precision to your
preference. The soft-click buttons are sensitive and
extremely silent so you can do your job without
distraction. The scrollwheel has a double function
as it allows you to scroll smoothly through web
pages/documents and acts as a third button.
Bluetooth technology gives you wireless freedom
and keeps your other computer ports free. The
mouse works with two "AAA" batteries that last up
to 3 months of use (at 8 hours of daily use).* The
Macally BTDYNAMOUSE has a stylish, matte finish
and ambidextrous design that offers maximum
comfort to both left-handed and right-handed
users and helps to increase your productivity.
Please read the following carefully before using this
Macally product. Incorrect use of this product may
result in reduced performance, permanent
damage and void warranty:
1. Do not place this product near a heat source.
2. Operating temperature of 0°C to 40°C. Storage
temperature of -20°C to 65°C.
3. Do not place this product near moisture nor
liquids.
4. Operate and store at humidity of 20% to 80%
(non-condensing)
5. Do not place heavy objects on this product.
6. Do not drop this product.
7. Do not dispose this product in the garbage. Take
it to your local recycling centre.
The Macally BTDYNAMOUSE does not require a
driver, only a Bluetooth enabled computer with Mac
OS X v10.6 and later or Microsoft Windows 7 / 8 / 10.
Simply follow the steps below and you are ready to
go!
Pairing the mouse with a Mac
1. Insert 2 “AAA” batteries (included) in the battery
compartment and turn the Bluetooth mouse On by
pressing the On/Off switch.
2. To connect the Bluetooth mouse to your
computer, bring it within 25 cm (1 ft) range from
your computer.
3. In your Mac, open ‘Bluetooth’ in ‘System
preferences’. Make sure Bluetooth is On.
4. Then, press the mouse scroll wheel and right
button at the same time for 3 seconds until the
green light flashes underneath the scroll wheel.
5. Macally Bluetooth Mouse’ will appear in the list
of Bluetooth Devices. Please click on ‘Connect’.
6. When ‘Macally Bluetooth Mouse’ shows
connected, you are ready to use the
BTDYNAMOUSE.
Pairing the mouse with Windows PC
1. Insert 2 “AAA” batteries (included) in the battery
compartment and turn the Bluetooth mouse On by
pressing the On/Off switch.
Buttons
Scroll
wheel
600/1000/1200
DPI optical
sensor
DPI button
Battery
compartment
On/Off
switch
2 AAA batteries
ON
OFF
AAA
AAA
