Maximum RF 4000 Manual


Læs gratis den danske manual til Maximum RF 4000 (10 sider) i kategorien TV antenne. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Maximum RF 4000, eller vil du spørge andre brugere om produktet?

Side 1/10
RF-4000 Universal Video Modulator
Channel Selectable
Thank you for purchasing the RF-4000
Universal VideoÆRF Modulator. You can insert
your favorite video program, such as DVD,
Satellite Receiver, Digital Set Top Box etc. to a
TV without RCA connector through this RF-4000 Universal VideoÆRF Modulator and you
can also share to several TV’s in your home through your RF
distribution network .
Please read this manual carefully before using this unit. We recommend you keep
this for future reference.
Feature
z With RF-4000 it is possible to forward your
antenna/video signal to more TV sets
z SCART Input/output and 1 RCA input
z Antenna input / output ( TV )
z DC power supply input
z ON/OFF switch
z Channel Adjustments (CH+/CH-)
z LED Channel Number display
Connection
1. Connection of the Audio/Video cables. Please check the colour-coded connection,
Yellow for Video, Red for Audio Right, White for Audio Left as labeled
í,
if you use SCART connector, please connect to SCART input as labeled
ì
2. Connect your CATV or TV cable (from Antenna) toï
3. Connect your TV set to ð
1 English
DVD
VCR
Set To
p
Box
SCART Cable SCART Cable
Input side Output side
Top View
4. Connect the DC power (please note,
it is very important to use the same rating
of DC Power adaptor as included,
the wrong rating or input voltage will
cause the unit to be destroyed,
fire or even serious injury)
5. If you want to connect the loop
through SCART Video, you can connect
SCART cable from the SCART out î to
your device.
Operation
1. When you have completed all of the connections, please slide the switch on the front
panel to "ON". This will power on the unit.
2. Channel Setting: you can select the output channel by using the CH +/- to select the
channel that you want (from CH21 to CH69), there are two 7 segment displays on the
top panel. These show the actual channel number.
3. Please use a channel number that is not already present on your RF network. Failure to
do this will result in a bad picture and sound qualit
y.
Specifications
RF
Input CH 2-69 (45-862 MHz)
Input Connector IEC Female,75 Ohm
Output (RF-4000) CH 21-69 (470-862 MHz)
Output(combined) CH 2-69 (45-862 MHz)
Output connector IEC Male,75 Ohm
Video & Audio
Input RCA/SCART
Output SCART(Loop Through)
Video Input impedance 75~1.3K Ohm
Video S/N 40dB min
Audio Input impedance 10K Ohm
Powering 9-12V DC
Accessories:
AC Adaptor x 1 230VAC (9 VDC @ 200mA)
RF Cable Male Female IEC @1M
Warning :
Keep the unit away form heat.
For indoor use only, in a dry and clean environment
Do not use the unit in humid rooms.
Do not open the unit .
Repairs should only be carried out by a qualified technician
2 English
Cable/Antenna
TV Input
To TV
Power
Input
RCA Input


Produkt Specifikationer

Mærke: Maximum
Kategori: TV antenne
Model: RF 4000

Har du brug for hjælp?

Hvis du har brug for hjælp til Maximum RF 4000 stil et spørgsmål nedenfor, og andre brugere vil svare dig




TV antenne Maximum Manualer

Maximum

Maximum RF 4000 Manual

11 August 2024

TV antenne Manualer

Nyeste TV antenne Manualer

PNI

PNI ML100 Manual

3 Juni 2025
Astrell

Astrell AST808 Manual

26 Marts 2025
Televés

Televés MIRA 5G Manual

27 Februar 2025
Televés

Televés BEXIA 5G Manual

27 Februar 2025
Magnavox

Magnavox MC372 Manual

7 Januar 2025
Magnavox

Magnavox MC347 Manual

7 Januar 2025