Media-Tech MT4212 Manual

Media-Tech Adgangspunkt MT4212

Læs gratis den danske manual til Media-Tech MT4212 (1 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Media-Tech MT4212, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

MT4212

Wireless-N Wifi Repeater

You can configure the Wi-Fi Repeater by connecting it with your

computer/laptop with enclosed RJ45 cable or wirelessly. We recommend you to

do it with wire.

A2. Click the “ ” button (it Start

should be located at the lower-left

corner of your screen), then click

“ ”. Click “Control Panel View Network

Status and Tasks”, and then click

“ ”. Manage Network Connections

Right-click “Local Area Network”,

then select “Properties”. When the

“ ” Local Area Connection Properties

window appears, select “Internet

Protocol Version 4 (TCP/IPv4)” and

then click “Properties”.

A1. Plug the Wi-Fi Repeater to a

wall socket. Connect your computer

/ laptop with the Wi-Fi Repeater with

enclosed RJ45 Cable.

A3. Setting IP address manually:

Type IP address is 192.168.10.x (x

is from 2 to 254), and Subnet mask

is 255.255.255.0. Type the Router’s

LAN IP address (the default IP is

192.168.10.1) into the Default

gateway field.

How to configure the Wi-Fi Repeater

A. Configure the Wi-Fi Repeater with RJ45 Cable

For a typical wireless setup at home (as shown below), please do the

following:

You will need WiFi

AP/Router Internet access

You will need broadband

Router Internet access

Connect the WiFi-Repeater

to your Router/Switch with

RJ-45 Cable

Setting up a Wireless Infrastructure Network

Wireless Repeater Mode

Getting Started

Wireless AP Mode

Wireless-N Wifi Repeater

The WiFi Repeater is a combined wired/wireless network connection device

designed specifically for small business, office, and home office networking

requirements. It allows a wireless network to be expanded using multiple access

points without the need for a wired backbone to link them. It also works well with

other 11b/g and 11n protocol wireless products.

NOTE: reset If you need to the Wi-Fi Repeater, you need press and hold the

reset button inside the tiny hole for seconds.10

Before you starting to use this router, please check if there's anything missing in

the package, and contact your dealer of purchase to claim for missing items:

·1 x Wireless-N Repeater

·1 x RJ-45 Networking Cable

·1 x Quick installation Guide

Introduction:

Package Contents

A7. Click on ‘ ’ buttonRepeater – OneKey Setting

A8. Wait a few seconds and you will see the site below and please click on

‘ ’ button.Wireless Network Selection

Wireless-N Wifi Repeater

05 Wireless-N Wifi Repeater

A11. Click ‘ ’ to confirm. The OK

Repeater will restart.

Wireless-N Wifi Repeater

WLAN

REPEATER

A12. Wait a few seconds and you will see the status site like below. It means

your Wi-Fi Repeater is ready for use.

Wi-Fi Repeater1The WLAN key is same with your router.

If you do not see the site like above, you need to re-configure it again.

NOTE reset: If you need to the Wi-Fi Repeater, you need press the reset button

inside the tiny hole for seconds. 10

A9. Click on ‘ ’ button. Refresh List

Select the Wireless SSID and click ‘ ’ to continue.Next

A10.When you see the site below, please do not change any setting but only

insert the password of your network.

Click on ‘ ’ button.Apply and Reboot

A4. Open web browser and type

http://192.168.10.1 in the browser's

address box. This number is the

default IP address for this device.

A5. The login screen below will

appear. Enter the “User Name” and

“Password” and click “ ” to login. OK

The default User name is “ ” admin

and the Password is “ ”.admin

A6. After logging in and click

“Setup Wizard”, you will see

the web page below:

Select “Wireless Repeater Mode

(Station)” ‘Next’ and click on to continue.

Quick Installation Guide (Q.IG)

Produkt Specifikationer

Mærke:	Media-Tech
Kategori:	Adgangspunkt
Model:	MT4212

Har du brug for hjælp?

Hvis du har brug for hjælp til Media-Tech MT4212 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Adgangspunkt Media-Tech Manualer

Media-Tech MT4212 Manual

27 August 2024

Adgangspunkt Manualer

Nyeste Adgangspunkt Manualer

Cudy AP11000 Manual

3 Juni 2025

Planet WDAP-C5100BE Manual

5 April 2025

Peplink AP One AX Manual

20 Marts 2025

Cisco Aironet 3600i Manual

15 Januar 2025

Cisco Aironet 3600e Manual

13 Januar 2025

Luxul P40 Manual

13 Januar 2025

Luxul XAP-1440 Manual

13 Januar 2025

Ubiquiti Networks UniFi AP Flex HD Manual

12 Januar 2025

TP-Link Omada EAP115-Wall Manual

30 December 2025

D-Link DBT-900AP Manual

26 December 2024