Memphis Audio SRX1200.1V Manual

Memphis Audio Modtager SRX1200.1V

Læs gratis den danske manual til Memphis Audio SRX1200.1V (8 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Memphis Audio SRX1200.1V, eller vil du spørge andre brugere om produktet?

Side 1/8
MONO AMPLIFIER
INSTRUCTION MANUAL
STREETREFERENCE
MODELS: SRX1200.1V, SRX750.1V, SRX500.1V, SRX250.1V
Features
Memphis Audio built a 50 year legacy in the audio industry engineering the highest quality products to produce
the best possible listening experience for our fans and loyal supporters. To fully appreciate our products we
recommend taking the time to read and follow the instructions in this manual. As always, we recommend all
installations and service be performed by an authorized Memphis Audio dealer.
• 2 stable (SRX1200.1V 1 stable) ˜ ˜
• High & low level inputs
• Bass boost 45Hz 0/6/12dB
• Variable subsonic filter (15Hz - 50Hz)
• Variable low pass filter (5 0Hz-250Hz)
• Protection circuitry: overload, short, thermal & reverse polarity
Nickel Plated Connectors
Ensures solid electrical connection that resist corrosion
Fully Variable High & Low Pass Crossovers
Fully variable crossovers promote installation ease and save the cost of outboard crossovers. Additionally, thy may be used in
conjunction with outboard passive or active crossovers depending on the complexity required by the system. The 12dB per octave
slope offers roll-off above or below the selected frequency.
Protection Circuitry
Protects against overload, short circuit, thermal and reverse polarity. These protection features are designed to protect the
amplifier from misuse as well as from common causes of amplifier failure.
LED Light
Blue light indicates that the amplifier is working normally. If the light is not illuminated or is glowing red, consult the
troubleshooting section of the manual.
Subsonic Filter
A subsonic filter has been provided to filter out unwanted subsonic bass frequencies below the audible range of the subwoofer.
This feature helps improve the amplifiers overall performance since power is not wasted reproducing frequencies beyond the
speaker operating range
Remote Level Control
Remote allows you to control the level of the subwoofer remotely by controlling the output level of the amplifier
For optimal performance, Memphis recommends using only Memphis Connection accessories. Outfitting
your system with properly sized Memphis Connection wire and accessories will dramatically boost your
listening experience and increase the durability of your Memphis Audio products.
Check out our full line of Street Reference speakers and subwoofers to create a complete Memphis
Street Reference system.
Street Reference amplifiers feature a MOSFET power supply with a 12dB per octave crossover to ensure the most
accurate musical reproduction. All models feature a fully variable crossover with 12db per octave slopes allowing
you the ability to tailor the sound to best fit your speakers and listening preferences.
STREET REFERENCE MONO AMPLIFIERS
SRX250.1V // SRX500.1V // SRX750.1V // SRX1200.1V
STREETREFERENCE
• Textured aluminum heatsink
• Selectable bass boost
• Ultra-bright LED accent light strip
• Remote level control included


Produkt Specifikationer

Mærke: Memphis Audio
Kategori: Modtager
Model: SRX1200.1V

Har du brug for hjælp?

Hvis du har brug for hjælp til Memphis Audio SRX1200.1V stil et spørgsmål nedenfor, og andre brugere vil svare dig