Mikrotik OmniTIK 5 Manual

Mikrotik Ikke kategoriseret OmniTIK 5

Læs gratis den danske manual til Mikrotik OmniTIK 5 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Mikrotik OmniTIK 5, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

OmniTIK series

OmniTIK seriesOmniTIK series

This User Manual covers OmniTik models:

RBOmniTikG-5HacD (OmniTIK 5 ac),RBOmniTikPG-5HacD (OmniTIK 5 PoE ac),RBOmniTikUPA-5HnD (OmniTIK 5 PoE),RBOmniTikU-5HnD (OmniTIK

Technical specifications, brochures, and more info about products at https://mikrotik.com/products

Configuration manual for software with additional information can be found at {+}https://mt.lv/help+

MikroTik devices are for professional use, if you do not have qualifications please seek a consultant https://mikrotik.com/consultants

Safety Information:

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

All installation methods for mounting an access point on any wall surface is subject to the acceptance of local jurisdiction.

The Installation of the equipment must comply with local and national electrical codes.

This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the

correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.

Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.

Read the installation instructions before connecting the system to the power source.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your

own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

This is a class A device. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate

measures.

IMPORTANT: Exposure to Radio Frequency Radiation.

IMPORTANT: Exposure to Radio Frequency Radiation.IMPORTANT: Exposure to Radio Frequency Radiation.

This equipment complies with the IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated

with a minimum distance of 30 cm between the radiator and any part of your body.

First use

First Ethernet is always configured as a WAN port (protected by a firewall, enabled DHCP client, and disabled MAC connection/discovery). Other Ethernet

ports and wireless interfaces are added to the local LAN bridge with 192.168.88.1/24 address set and configured DHCP server.

Open the bottom lid.

Connect your PC or LAN cables to the Ethernet ports.

Connect power source as described in the Powering section.

Set LAN computer IP configuration to automatic (DHCP).

The Default IP address of the unit is 192.168.88.1, open this address in your web browser to start the configuration. The username is admin and

there is no password . (or, for some models, check user and wireless passwords on the sticker)

We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best

performance and stability.

Choose your country, apply country regulation settings and set up your password on the screen that loads.

We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best performance and

stability. RouterOS includes many configuration options in addition to what is described in this document. We suggest visiting the RouterOS documentation

page to get yourself accustomed to the possibilities: .https://mt.lv/help

In case an IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address of the device from the LAN https://mt.lv/winbox

side (all access is blocked from the internet port by default).

This device needs to be upgraded to RouterOS v7.11.2 or the latest version to ensure compliance with local authority regulations.

It is the end users' responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed.

Powering

The device accepts power in the following ways:

Ethernet port accepts passive PoE 12-57 V DC . For Omnitik 5 models, 11-30 V.

The power consumption under maximum load can reach 14 W.

PoE version accepts 12-57 V DC with a maximum consumption of 18W, with attachments 66 W.

Connecting to a PoE Adapter:

Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter;

Connect an Ethernet cable from your local network (LAN) to the PoE adapter;

Connect the power cord to the adapter, and then plug the power cord into a power outlet.

Power output

Applies only to OmniTik 5 PoE ac:

This device can supply PoE power to external devices from its Ethernet ports. This is convenient as you don't need any

additional PoE injectors to power other devices. The output voltage will be the same as the input voltage. The maximum power output of each Ethernet

port in this mode is 1A (the total maximum for all ports is 2A). To reach maximum output power it is recommended to use a high voltage adapter together

with the included PoE injector to power the OmniTik unit (48/56V), because 802.3af/at the input is limited to 30W and OmniTik will consume up to 15W by

itself. Once Power Output is enabled in RouterOS, the Ethernet LED adds red color to it (green means Ethernet link is made, red means power but no link,

red and green both means there is link and power).

Mounting

On the back of the device, slide the included pole mount adapter with the clip facing forward, until the clip clicks into place.

Use the included hose clamp to attach the unit to a pole or mast. Adjustable QuickMount adapters are available separately.

The OmniTik has a locking screw that secures the port door, it can be closed with a 5mm hex screwdriver.

Grounding