Mitsubishi EY-3D-EMT2H Manual


Læs gratis den danske manual til Mitsubishi EY-3D-EMT2H (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Mitsubishi EY-3D-EMT2H, eller vil du spørge andre brugere om produktet?

Side 1/8
Contents
ENGLISH
Mitsubishi projectors compatible with this 3D emitter
(as of June 2012)
HC7900DW
Supported projectors are subject to change without notice.
For details about the 3D system, see the descriptions of the 3D in the User Manual
supplied with the projector.
Safety precautions ......................2
Using precautions .......................2
Introduction .................................5
What’s included in the box ..........5
Installation and connection .........5
Troubleshooting ...........................7
Specifi cations ..............................7
This User Manual is important to you.
Please read it before using your 3D emitter.
3D EMITTER
MODEL
EY-3D-EMT2H
User Manual
EN-2
Safety precautions
WARNING:
Do not store screws in places where small children can reach.
There is a danger small children could swallow such parts by mistake. If a child
accidentally swallows such parts, seek immediate medical attention.
Contact your dealer if there is something wrong with your 3D emitter.
Do not operate if smoke, strange noise or odor comes out of your projector. It
might cause fi re or electric shock. In this case, contact your dealer immediately.
Do not keep using the damaged 3D emitter.
It can lead to re or electric shock.
Do not drop or modify your 3D emitter.
It can lead to breakdown or other failure.
CAUTION:
Not for use in a computer room as defi ned in the Standard for the Protection of
Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
This 3D emitter is used only for Mitsubishi projectors supporting 3D
images.
Use this 3D emitter only for viewing 3D images on the supported Mitsubishi
projectors.
The 3D glasses work by receiving an infra-red light from the 3D emitter. Other
infra-red communication devices, lighting fi xtures, or heating appliances placed
near the 3D emitter may affect the operation of the 3D glasses.
View 3D images within the signal reception range.
The signal of the 3D emitter may be affected by that of the infra-red remote
control. In such a case, change the orientation of the 3D emitter.
A remote control may operate improperly while you watch the 3D images,
however, it is not a malfunction.
When using the device in Europe:
COMPLIANCE NOTICE
This device complies with the requirements of the EC Directive 2004/108/EC
“EMC Directive” .
The electro-magnetic susceptibility has been chosen at a level that gains proper
operation in residential areas, on business and light industrial premises and on
small-scale enterprises, inside as well as outside of the buildings.
Using precautions


Produkt Specifikationer

Mærke: Mitsubishi
Kategori: Ikke kategoriseret
Model: EY-3D-EMT2H

Har du brug for hjælp?

Hvis du har brug for hjælp til Mitsubishi EY-3D-EMT2H stil et spørgsmål nedenfor, og andre brugere vil svare dig