Mitsubishi WB-PA3 Manual


Læs nedenfor 📖 manual på dansk for Mitsubishi WB-PA3 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 5.0 stjerner i gennemsnit af 2.5 brugere

Side 1/2
© 2017 Mitsubishi Electric US, Inc. Specications are subject to change without notice.
INSTALLATION MANUAL
For safe and correct use, please read this installation manual thoroughly before installing the advanced wind bafes.
English
FOR INSTALLER
Wind Bafe
WB-PA3
for use with:
MITSUBISHI ELECTRIC US, INC.
WARNING! MOVING PARTS. INCORRECT HANDLING COULD LEAD TO DEATH OR INJURY!
IMPORTANT! Outdoor Unit should be installed with back coil surface facing a wall or oriented so the wind
does NOT blow directly on to the back coil surface. Do not install this product where there is any obstacle at
either side or above the outdoor unit. If the discharge air is obstructed the air may be short cycled.
STEPS:
1. Position wind bafe over fan guard and line up with pre-punched holes.
Install lower wind bafe rst to ease installation.
2. Insert the provided self-tapping screws into the top holes rst.
3. Install remaining screws and tighten all 4 screws securely. Repeat with all bafes.
ENSURE BAFFLE OUTLETS WILL NOT BE BLOCKED OR OBSTRUCTED !
PUZ-HA42NKA; PUMY-P60NKMU;
PUMY-P36/P48/P60NKMU1; PUY/Z-A36/A42NKA7
Outdoor Units
Specications are subject to change without notice. © 2017 Mitsubishi Electric US, Inc.
Wind Bafe WB-PA3 Installation Instructions, February 2017
Please be sure to put the contact address/telephone number on
this manual before handing it to the customer.
This product is designed and intended for use in commercial and
light-industrial environment.
www.mitsubishielectric-usa.com
Toll Free: 800-433-4822
Manufactured for MITSUBISHI ELECTRIC US, INC.


Produkt Specifikationer

Mærke: Mitsubishi
Kategori: Ikke kategoriseret
Model: WB-PA3

Har du brug for hjælp?

Hvis du har brug for hjælp til Mitsubishi WB-PA3 stil et spørgsmål nedenfor, og andre brugere vil svare dig