NAV-TV S2P NTV-KIT334 Manual

NAV-TV Ikke kategoriseret S2P NTV-KIT334

Læs gratis den danske manual til NAV-TV S2P NTV-KIT334 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om NAV-TV S2P NTV-KIT334, eller vil du spørge andre brugere om produktet?

Side 1/2
BHM
05/20/14
NTV-DOC096
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
1 | P a g e
3950 NW 120th Ave, Coral Springs, FL 33 TEL 561-955-9770 FAX 561-955-9760 065
www.nav-tv.com info@nav-tv.com
S2P (Signal to Power)
NTV-KIT334
Overview
The S2P provides a 12v accessory ’ source
from mulple signal inputs. It can be
triggered in the following ways:
Kit Contents
S2P Pin out
PIN #
Descripon
Color
1
CAN HI
Brown/Red
2
12v (+) Constant input
Yellow
3
12v (+) (when triggered) OUT
Red
4
Low voltage (+) input
White/Blue
5
CAN LO
Brown
6
Chassis Ground (-) input
Black
7
RCA Video signal
RCA
8
Low voltage (-) input
Blue
S2P Harness
NTV-HAR203
S2P Module
NTV-ASY177
Wire side
From a video signal
From CAN/GMLAN connecon
From low voltage input (Posive/Negave)
RCA Splier
NTV-CON013
RCA male to male
NTV-CON018
BHM
05/20/14
NTV-DOC096
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for :
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 | P a g e
Features Descripon
Video signal: Whenever a video signal is present, the unit will output +12v. This works well with
our RGB products. Whenever an external source is turned on, (DVD player, IPod Video, etc) it
will trigger the RGB converter to switch to the external video input, without the need for a
toggle switch.
When pins 4 & 8 are connected to CAN or *GM LAN, the unit will output 12 CAN/LAN signal:
volts the enre me data is passing. Once data has stopped transming, the unit will
shutdown 3 seconds later. The most common applicaon for this type of connecon is for
vehicles that do not have an easily accessible 12v switched wire. Use for installaon of backup
cameras, RGB, DVD players, etc.
*GMLAN requires the brown wire grounded for reliability. The brown/red wire goes to the
LAN wire.
Low voltage trigger: There are 2 low voltage trigger inputs. The white/blue wire is for low
voltage 12v signals. It will accept an input voltage as low as 4v. The blue wire is for a low volta ge
negave signal, commonly found on the MUTE output on a Parrot Bluetooth module.
Accessory Output: This output is only rated at 500mA and should normally be used to trigger
a relay.


Produkt Specifikationer

Mærke: NAV-TV
Kategori: Ikke kategoriseret
Model: S2P NTV-KIT334

Har du brug for hjælp?

Hvis du har brug for hjælp til NAV-TV S2P NTV-KIT334 stil et spørgsmål nedenfor, og andre brugere vil svare dig