Noise Engineering Clep Diaz Manual


Læs gratis den danske manual til Noise Engineering Clep Diaz (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Noise Engineering Clep Diaz, eller vil du spørge andre brugere om produktet?

Side 1/8
Overview
Clep Diaz is a handy and small step CV and LFO generator. In step and
random modes, use the encoder to control the number of steps in the
sequence; in LFO mode, the encoder controls the amplitude of the wave.
Toggle the directionality of the sequence: up, down, or up/down to
customize the CVs further. CD also gives CV control over the number of
steps in the sequence and a beginning-of-cycle trigger output. Unipolar
and bipolar outputs allow maximal control.
1
Noise Engineering
Clep Diaz
Multimode step CV generator & LFO
Type
Step CV Generator
Size
4HP Eurorack
Depth
.8 Inches
Power
2x5 Eurorack
+12 mA
44 mA
-12 mA
10 mA
Etymology
Clep -- from Greek Clepsydra: a time keeper that uses water ow
Diaz-- from Greek Diazoma: divider
“Divided time keeper”
Interface
step/rand/lfo: Mode switch to move between Step, Random, and LFO
modes.
In Step and Random modes, CD outputs a sequence of a controllable number of steps; use
the Count encoder (below) to set. In Step mode, steps will move only in the chosen
direction (resetting at the end of the cycle). In Random mode, CD randomizes the values
of the steps in the sequence to create variation. In LFO mode, CD outputs a smooth noise
LFO based on the timing of the input clock. As the Count knob is turned CW, the
amplitude is increased.
If the number of steps in the sequence is divisible by three, the top LED will glow dimly;
if it is divisible by four, it will glow brightly.
up/updn/dn: In Step and Random modes, this determines the directionality of
the steps. In LFO mode, this controls the symmetry of the wave: Up subtly decreases the
slope of the rise of the wave, updn makes the LFO wave symmetrical, and dn subtly
decreases the slope of the decay of the LFO wave.
The max number of steps in up and down modes is 32. In updn mode, the max is 63 steps.
Count: An encoder. If no lights are lit on the LED counter, the CV is muted. Turn
CW to increase the number of steps in the CV sequence. Tap the encoder to mute the
sequence. A second tap will unmute CD, or return it to the state it was in before it was
muted. LEDs illuminate to serve as a guide for the number of steps in the current
sequence.
Clk: Clock input. Advances the current step.
Rst: Optional clock input to reset CD at the beginning of the pattern.
CV: CV input control over the number of steps in the cycle
BOC: Outputs a single trigger pulse at the beginning of each cycle. In LFO mode, this
is random.
Bi/Uni: Bipolar and Unipolar CV outputs. Outputs are not quantized.
2
Noise Engineering
Clep Diaz
Multimode step CV generator & LFO


Produkt Specifikationer

Mærke: Noise Engineering
Kategori: Ikke kategoriseret
Model: Clep Diaz

Har du brug for hjælp?

Hvis du har brug for hjælp til Noise Engineering Clep Diaz stil et spørgsmål nedenfor, og andre brugere vil svare dig