Noise Engineering Mimetic Digitalis Manual


Læs gratis den danske manual til Noise Engineering Mimetic Digitalis (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Noise Engineering Mimetic Digitalis, eller vil du spørge andre brugere om produktet?

Side 1/5
Overview
Mimetic Digitalis is a 10HP step sequencer optimized for live use. MD includes four individually
editable CV outputs and a trigger out. Each step can be manually programmed or use MD to live record
CV sequences using the encoder. e zero button mutes the CV at and a step shred randomizes the
voltage. Save and load up to 16 patterns. Edit a pattern and use undo to return to the unedited version.
1
Noise Engineering
Mimetic Digitalis
XY step sequencer optimized for live use
Type
XY CV sequencer
Size
10HP Eurorack
Depth
.8 Inches
Power
2x5 Eurorack
+12 mA
58 mA
-12 mA
22 mA
Etymology
Mimetic -- from Latin -- "mime" with suffix -ic "pertaining to" mimus
"pertaining to mimes”
Digitalis -- from Latin “belonging to a finger”; also a plant that will kill you.
“Finger mime of death”
MD will trigger on the rising edge of a signal above about 2.2v and responds to CVs from 0-5v. It
outputs triggers at about 6v and CV signals from 0-5v.
Input & output voltages
Patch Tutorial
First patch
Patch a trigger source to the N input. Patch any number of CV outputs to
CV inputs of an oscillator. If it is a triggered oscillator, patch the T out to
the trigger input of the oscillator. Switch MD to Run and use the
Channel Selector buttons to select the output(s) you are using and Edit
them with the encoder.
Advanced patch
Patch at least one trigger source into the trigger inputs. Patch outputs to
CV inputs on an oscillator. Add LFOs to the CV inputs. Edit channels
and have fun.
2
Noise Engineering
Mimetic Digitalis
XY step sequencer optimized for live use


Produkt Specifikationer

Mærke: Noise Engineering
Kategori: Ikke kategoriseret
Model: Mimetic Digitalis

Har du brug for hjælp?

Hvis du har brug for hjælp til Noise Engineering Mimetic Digitalis stil et spørgsmål nedenfor, og andre brugere vil svare dig