Noise Engineering Soleo Vero Manual

Noise Engineering Ikke kategoriseret Soleo Vero

Læs gratis den danske manual til Noise Engineering Soleo Vero (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Noise Engineering Soleo Vero, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Overview

Soleo Vero is a 4HP stroboscope tuner for up to three oscillators. Patch directly through the SV to avoid

patching and repatching. Stroboscope allows tuning across a range of octaves on the y...and even without

audio monitoring. No more bumped oscillator surprises! Optional mode allows tuning to either the 440Hz

and 432Hz standards.

Noise Engineering

Soleo Vero

Patch-through stroboscope tuner

Type

Tuner

Size

4HP Eurorack

Depth

.8 Inches

Power

2x5 Eurorack

+12 mA

42 mA

-12 mA

5 mA

Etymology

Soleo -- from Latin solere: “to be accustomed to”

Vero -- from Latin vero: “without a doubt”

“I am in the habit of truth”

Soleo Vero tunes from the lowest A of 27.5 Hz to a highest A of 3520 Hz.

Tuning Range

Patch Tutorial

Patch the output of an oscillator into Input 1. Choose input 1 with the input

switch. Choose a note you’d like to tune to. Use your oscillator’s pitch control to

move to the octave you’d like to be in. When the pitch is close, the sharp at or

indicator LED will illuminate. Adjust the oscillator in the opposite direction and

continue to tune up or down until the strobe stops moving. Optional: plug the

output into a mixer to listen.

Interface

In: three inputs, each normaled horizontally across the module to its output.

Through: output

1/2/3 Switch: selects which input is being tuned.

Note: Chooses which note you wish to tune to. Tap once to see current setting.

Tap again to select another note. The selected note will be applied to all three

channels.

Octave: The green octave readout gives a quick indication of the octave of

oscillator’s pitch. Use to cross reference across channels.

Flat/Sharp: blue LEDs that illuminate when coarse tuning an oscillator to tell

you whether the oscillator is ﬂat or sharp.

Stroboscope: The stroboscope portion of the display is the ﬁne tuning readout.

As with other stroboscope tuners, when the display stabilizes, the input oscillator

is identical in pitch to the internal reference. As long as the strobe is stable or

moving very slowly, the input oscillator will be in tune.

Mode: To change between

Noise Engineering

Soleo Vero

Patch-through stroboscope tuner

Produkt Specifikationer

Mærke:	Noise Engineering
Kategori:	Ikke kategoriseret
Model:	Soleo Vero

Har du brug for hjælp?

Hvis du har brug for hjælp til Noise Engineering Soleo Vero stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Noise Engineering Manualer

Noise Engineering Cursus Iteritas Percido Manual

19 Marts 2025

Noise Engineering Sinc Bucina Manual

22 August 2024

Noise Engineering Pura Ruina Manual

12 April 2024

Noise Engineering Quantus Pax Manual

26 Januar 2024

Noise Engineering Fractio Solum Manual

18 Januar 2024

Noise Engineering Sono Abitus Manual

8 December 2023

Noise Engineering Soleo Vero Manual

5 September 2023

Noise Engineering Mimetic Digitalis Manual

29 Juli 2023

Noise Engineering Viol Ruina Manual

9 Juli 2023

Noise Engineering Bin Seq Manual

26 April 2023

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Oppo Find X7 Manual

31 Juli 2025

Intellinet 713191 Manual

31 Juli 2025

Emos DCFW01 Manual

31 Juli 2025

AIC RSC-3ET Manual

31 Juli 2025

Tone City King Of Blues Overdrive Manual

31 Juli 2025

Tripp Lite Protect It! TLM606HJ Manual

31 Juli 2025

Bestway Hydro-Force 6531M Manual

31 Juli 2025

Tripp Lite NGI-S04C2 Manual

31 Juli 2025

Advantech RSB-3720 Manual

31 Juli 2025

Tripp Lite Protect It! TLM606 Manual

31 Juli 2025