Noise Engineering Sono Abitus Manual
Noise Engineering
Ikke kategoriseret
Sono Abitus
Læs gratis den danske manual til Noise Engineering Sono Abitus (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Noise Engineering Sono Abitus, eller vil du spørge andre brugere om produktet?
Side 1/3
1
Noise Engineering
Sono Abitus
Stereo balanced ¼” TRS output and ¼” headphone
output with separate level controls in 4 HP.
Type Headphone amplier and
balanced line output
Size 4 HP
Depth 1.5 inches
Power 2x5 Eurorack
+12 mA 50
-12 mA 50
+5 mA 0
Overview
Sono Abitus is a high-quality output module. It has a stereo pair of Eurorack-level ⅛”
inputs that feed a pair of ¼” TRS jacks for line output and a ¼” headphone output. The
headphone output and line outputs have separate level controls, making it easy to
monitor while performing or recording.
Etymology
Sono -- from Latin: “to make a noise”
Abitus -- from latin: “way out, exit”
“Make noises exit”
WARNING
The headphone output can be EXTREMELY loud. In a normal, quiet environment, the
rst 25% of the knob will probably cover all the volume range you’ll need. Use caution
when listening on headphones (or in general!) as high audio levels can cause
permanent hearing damage. Protect those earholes.
2
Power
To power your Noise Engineering module, turn o your case. Plug
one end of your ribbon cable into your power board so that the red
stripe on the ribbon cable is aligned to the side that says -12v and
each pin on the power header is plugged into the connector on the
ribbon. Make sure no pins are overhanging the connector! If they
are, unplug it and realign.
Line up the red stripe on the ribbon cable so that it matches the
white stripe and/or -12v indication on the board and plug in the
connector.
Screw your module into your case BEFORE powering on the
module. You risk bumping the module’s PCB against something
metallic and damaging it if it’s not properly secured when powered
on.
You should be good to go if you followed these instructions. Now
go make some noise!
A nal note. Some modules have other headers -- they may have
a dierent number of pins or may say NOT POWER. In general,
unless a manual tells you otherwise, DO NOT CONNECT THOSE
TO POWER.
Warranty
Noise Engineering backs all our products with a product warranty: we guarantee our
products to be free from manufacturing defects (materials or workmanship) for one year
from the date of the original retail purchase (receipt or invoice required). The cost of
shipping to Noise Engineering is paid by the user. Modules requiring warranty repair will
either be repaired or replaced at Noise Engineering's discretion. If you believe you have
a product that has a defect that is out of warranty, please contact us.
This warranty does not cover damage due to improper handling, storage, use, or abuse,
modications, or improper power or other voltage application.
Produkt Specifikationer
| Mærke: | Noise Engineering |
| Kategori: | Ikke kategoriseret |
| Model: | Sono Abitus |
Har du brug for hjælp?
Hvis du har brug for hjælp til Noise Engineering Sono Abitus stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Noise Engineering Manualer
22 August 2024
12 April 2024
26 Januar 2024
18 Januar 2024
8 December 2023
5 September 2023
29 Juli 2023
9 Juli 2023
26 April 2023
21 April 2023
Ikke kategoriseret Manualer
- Manhattan
- Xline
- Martin
- Copernicus
- Cello
- Franzis
- Pivo
- GAM
- Luxul
- Baninni
- Tormatic
- Alecto
- Altra
- SmallRig
- Gudsen
Nyeste Ikke kategoriseret Manualer
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025