Noise Engineering Numeric Repetitor Manual


Læs gratis den danske manual til Noise Engineering Numeric Repetitor (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Noise Engineering Numeric Repetitor, eller vil du spørge andre brugere om produktet?

Side 1/7
Overview
Ty Rhythm Generatorpe
Size 8HP Eurorack
De .8 Inchespth
Po 2x5 Eurorackwer
+12 mA 50
-12 mA 5
Numeric Repetitor is a rhythmic gate generator based on binary arithmetic. A core
pattern forms the basis and variation is achieved by treating this pattern as a binary
number and multiplying it by another.
is module contains 32 prime rhythms derived by examining all possible rhythms
and weeding out bad ones via heuristic. ree of the outputs are variable by knob or
CV. It requires only a beat clock to run.
1
Noise Engineering
Numeric Repetitor
Dynamic Rythmic Generator
Zularic Repetitors trigger inputs trigger around 2.5v. Its CV inputs have a range of about 7v and its
outputs are around 9v.
Input & output voltages
Power
You should be good to go if you followed these instructions. Now
go make some noise!
To power your Noise Engineering module, turn off your case. Plug
one end of your ribbon cable into your power board so that the red
stripe on the ribbon cable is aligned to the side that says -12v and
each pin on the power header is plugged into the connector on the
ribbon. Make sure no pins are overhanging the connector.
Line up the red stripe on the ribbon cable so that it matches the
white stripe and/or -12v indication on the board and plug in the
connector.
Screw your module into your case BEFORE powering on the
module. You risk bumping the module’s PCB against something
metallic and damaging it if it’s not properly secured when powered
on.
A final note. Some modules have other headers -- they may have a
different number of pins or may say NOT POWER. In general,
unless a manual tells you otherwise, DO NOT CONNECT THOSE
TO POWER.
Warranty
Noise Engineering backs all our products with a product warranty: we guarantee our products to be free
from manufacturing defects (materials or workmanship) for one year from the date of the original retail
purchase (receipt or invoice required). The cost of shipping to Noise Engineering is paid by the user.
Modules requiring warranty repair will either be repaired or replaced at Noise Engineering's discretion. If
you believe you have a product that has a defect that is out of warranty, please contact us.
This warranty does not cover damage due to improper handling, storage, use, or abuse, modifications, or
improper power or other voltage application.
2


Produkt Specifikationer

Mærke: Noise Engineering
Kategori: Ikke kategoriseret
Model: Numeric Repetitor

Har du brug for hjælp?

Hvis du har brug for hjælp til Noise Engineering Numeric Repetitor stil et spørgsmål nedenfor, og andre brugere vil svare dig