Noise Engineering Quant Gemi Manual


Læs gratis den danske manual til Noise Engineering Quant Gemi (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Noise Engineering Quant Gemi, eller vil du spørge andre brugere om produktet?

Side 1/3
Overview
Quant Gemi is a small transposition/split utility. Each channel can be used to transpose a sequence up
0, 1, or 2 octaves. The channels are also normalled together so the same sequence can be split up to 4
ways and transposed separately.
1
Noise Engineering
Quant Gemi
Quad octave switch and mult
Etymology
Quant -- from Latin : “how many” quantus
Gemi -- from Latin : “to pair or double”gemino
“Multiple doubling
QG is designed to work with the widest range of voltages possible, so anything within -8v to +8v
should work fine, if you really need a 16-octave melody in your patch somewhere.
Input & output voltages
Type
Quad octave switch/mult
Size
4HP Eurorack
Depth
.8 Inches
Power
2x5 Eurorack
+12 mA
40mA
-12 mA
40mA
Power
Line up the red stripe on the ribbon cable so that it matches the
white stripe and/or -12v indication on the board and plug in the
connector.
To power your Noise Engineering module, turn off your case. Plug
one end of your ribbon cable into your power board so that the red
stripe on the ribbon cable is aligned to the side that says -12v and
each pin on the power header is plugged into the connector on the
ribbon. Make sure no pins are overhanging the connector.
You should be good to go if you followed these instructions. Now
go make some noise!
A final note. Some modules have other headers -- they may have a
different number of pins or may say NOT POWER. In general,
unless a manual tells you otherwise, DO NOT CONNECT THOSE
TO POWER.
Screw your module into your case BEFORE powering on the
module. You risk bumping the module’s PCB against something
metallic and damaging it if it’s not properly secured when powered
on.
Warranty
This warranty does not cover damage due to improper handling, storage, use, or abuse, modifications, or
improper power or other voltage application.
Noise Engineering backs all our products with a product warranty: we guarantee our products to be free
from manufacturing defects (materials or workmanship) for one year from the date of the original retail
purchase (receipt or invoice required). The cost of shipping to Noise Engineering is paid by the user.
Modules requiring warranty repair will either be repaired or replaced at Noise Engineering's discretion. If
you believe you have a product that has a defect that is out of warranty, please contact us.
2


Produkt Specifikationer

Mærke: Noise Engineering
Kategori: Ikke kategoriseret
Model: Quant Gemi

Har du brug for hjælp?

Hvis du har brug for hjælp til Noise Engineering Quant Gemi stil et spørgsmål nedenfor, og andre brugere vil svare dig