Power Soak SS-S Manual

Power Soak Ikke kategoriseret SS-S

Læs gratis den danske manual til Power Soak SS-S (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Power Soak SS-S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

INTRODUCTION AND CONVENTIONS

PRODUCT INTRODUCTION

Thank you for purchasing a Silver Soak Pre-washing System. When used properly,

your system will provide years of dependable, efcient and trouble-free service. As a

Silver Soak owner, you will benet in numerous ways:

• Your silverware washing operation will be more efcient.

• Your silverware will be cleaner and your customers will enjoy an enhanced

experience.

• Demands on your spray washer will be drastically reduced.

• The need for hand polishing will decrease or be eliminated, and employee morale

will increase.

• Chemical and water usage will decrease.

Every system is manufactured to last, with high-quality, heavy-duty, 14 gauge stainless

steel used in its construction. All electrical components are of the highest quality. The

system is easy to use, gentle on silverware, and very compact.

At Power Soak, we take pride in manufacturing the Power Soak line and are committed

to standing behind our customers and products. Should you ever need assistance,

please contact us directly by dialing 888-994-7636 or fax: 601-371-9732.

This manual covers the following Silverware Pre-washer types:

MOBILE: These pre-washers are designed with legs equipped with casters to allow

them to move about the scullery. They may also be moved to bussing areas of banquet

halls or other locations where permanent installation is not practical. They are drained

into oor sinks, and they are lled with a tempered (110-115ºF) portable water supply.

Available at 115V only with built-in power cords.

STATIONARY: These stand alone pre-washers are not portable but do not require

permanent installation into an existing dish table. They are designed with legs but

do not have casters. The drain and faucet connections are typically hard plumbed per

local code. They are lled with a tempered (110-115ºF) portable water supply. The

electrical connection is typically hard wired per local code.

DROP-IN: These pre-washers are mechanically installed into dish tables. See installation

manual for cutting hole to accept the drop-in unit into a dish table. The Drop-in pre-

washer uses a ange and clamp to lock itself into the dish table opening. The drain

and faucet connections are typically hard plumbed per local code. They are lled with a

tempered (110-115ºF) portable water supply. The electrical connection is typically hard

wired per local code.

WELD-IN: These pre-washers are designed to be integrally welded into new or existing

dish tables. See installation manual for cutting hole to accept the weld-in unit into a dish

table. The drain and faucet connections are typically hard plumbed per local code. They

are lled with a tempered (110-115ºF) portable water supply. The electrical connection

is typically hard wired per local code.

EXPLANATION OF WARNING MESSAGES

Read, understand and follow all DANGER, WARNING, and CAUTION messages located in

this guide and on the equipment.

Danger

Personal Injury and Property Damage hazard.

May result in serious injury or death.

May cause extensive equipment damage.

Warning

Property Damage Hazard.

May result in property or equipment damage.

Chemical Hazard

May result in serious injury or death. Instructions, labels and Material Safety

Data Sheets (MSDSs) should be supplied with all cleaning chemicals by the

chemical supplier.

Power Soak is not a manufacturer, importer, or distributor of cleaning

chemicals. Power Soak, Inc. will not make specic brand recommendations

for these chemicals.

OPERATOR MANUAL

IMPORTANT INFORMATION, KEEP FOR OPERATOR

888-994-7636, fax 888-864-7636

uniedbrands.net

PART NUMBER 33638, REV. A (08/23)

This manual provides information for:

SILVER SOAK PRE-WASHING SYSTEM

THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ,

UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS

CONTAINED IN THIS MANUAL.

NOTIFY CARRIER OF DAMAGE AT ONCE It is the responsibility of the

consignee to inspect the container upon receipt of same and to determine

the possibility of any damage, including concealed damage. Power Soak

suggests that if you are suspicious of damage to make a notation on the

delivery receipt. It will be the responsibility of the consignee to le a claim

with the carrier. We recommend that you do so at once.

Manufacture Service/Questions 888-994-7636.

Information contained in this document is known to be current and accurate at the time of printing/creation. Reference our product line website for the most updated product information and