PowerWalker VI 800 CSW Manual

PowerWalker UPS VI 800 CSW

Læs gratis den danske manual til PowerWalker VI 800 CSW (4 sider) i kategorien UPS. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om PowerWalker VI 800 CSW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

ENGLISH

PowerWalker VI 600 1500 CSW-

Quick Guide

I. Overview:

1. LCD display

2. Up/down buon

3. Mute buon

4. ON / OFF buon

5. USB charging port

(5V / 2.1A shared

between 2 ports)

6. USB Communicaon

port with HID support

7. Surge protected -

outlets (no baery

backup)

8. Baery backup with

surge protected

outlets

9. RJ-45 surge protecon

(i.e. for Internet)

10. AC input

11. Venlaon and fan.

12. Circuit breaker (for

French and Schuko)

Surge protected outlets offer EMI ltering, line condioning and surge protecon, -

but they are not supported with backup power from battery in case of AC failure.

II. Operaon

Buon

Funcon

ON/OFF

buon

Press and hold the On/O Buon for 2 seconds and then release to

change state between Standby (output is o) and Line (output is on).

Mute buon

Press and hold the Mute buon for 1 second and then release to

mute or unmute the alarm.

Up/down

buon

Click to switch displayed informaon.

ENGLISH

III. Display

State

Display

Meaning

LED

Alarm

Line /

Standby /

Baery

mode

Input voltage, input frequency, baery voltage, baery

Power, Backup me, output voltage, output frequency,

load Power and load percentage.

k: kilo, W: wa, V: voltage, A: ampere, %: percent, degC:

centigrade degree, Hz: frequency, min: minute

Line

Mode

The UPS is connected to AC input.

AVR

Mode

ashing

When the icon is ashing, the UPS is regulang the

voltage (reducing or increasing the voltage).

Baery

Mode

The UPS is running on battery

every

10 s

All Modes

The UPS alarm is disabled.

All Modes

Baery level in ranges 0 24%, 25 49%, 50 74%, and 75- - - -

100%.

Baery

Mode

Low Battery

every

0.5s

every

All Modes

Load level in ranges 0-24%, 25-49%, 50-74% and 75-100%.

All Modes

Indicates overload.

every

0.5s

every

0.5s

All Modes

Baery replacement needed or the baery is not

connected

Conn

uous

every

Fault

Fault code (here: E14). Check troubleshoong for details.

Connu

ous

Warning

Baery voltage is too high (i.e. wrong baery inserted)

every

1.5s

Produkt Specifikationer

Mærke:	PowerWalker
Kategori:	UPS
Model:	VI 800 CSW

Har du brug for hjælp?

Hvis du har brug for hjælp til PowerWalker VI 800 CSW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

UPS PowerWalker Manualer

PowerWalker VI 1000 MS Manual

2 September 2024

PowerWalker VI 800 CSW Manual

2 September 2024

PowerWalker VFI 6000 CG PF1 Manual

31 August 2024

PowerWalker VFI 10000 CG PF1 Manual

31 August 2024

PowerWalker VFD 600 APFC Manual

31 August 2024

PowerWalker VI 1000 SCL Manual

31 August 2024

PowerWalker VI 3000 SCL Manual

31 August 2024

PowerWalker Smart PoE UPS Manual

31 August 2024

PowerWalker VI 3000 RLE Manual

31 August 2024

UPS Manualer

Nyeste UPS Manualer

APC RBC150 Manual

2 April 2025

APC RBC151 Manual

2 April 2025

APC Symmetra LX 4kVA Manual

30 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Teltonika BAT120 Manual

30 Januar 2025

APC BX1000M Manual

30 Januar 2025

APC BX850 Manual

30 Januar 2025