Puls Dimension DIMENSION UZK12.071 Manual

Puls Dimension UPS DIMENSION UZK12.071

Læs gratis den danske manual til Puls Dimension DIMENSION UZK12.071 (2 sider) i kategorien UPS. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Puls Dimension DIMENSION UZK12.071, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
UZK12.071/ UZB12.071/ UZO12.07
–
U-Series
Battery Module 12V, 7Ah
September 2006 / Rev. 1.0 / DS-UZK12.071-EN / All parameters are specified at 25°C ambient unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
1/1
B M ATTERY ODULES
A modular concept allows the user to meet individual
application demands and is available with two different
options:
You can order the module with an assembled battery or
you can choose only the bracket allowing the mounting
of individual batteries such as long life or higher current
which achieves a longer buffer-time. The mounting
bracket allows the battery to be assembled just in time
avoiding outdated batteries due to limited shelf life.
■ Two mounting options:
DIN-Rail or panel/wall mounting
■ Easy access to the terminals and the fuse
■ Heavy duty fuse holder and spare fuse included
D ATA
D ATA
Battery
Maintenance free valve regulated lead acid battery
Battery voltage nom 12Vdc
Battery capacity nom 7Ah
Self-discharge typ 3%/ month at 20°C
Design life (EUROBAT) 3 to 5 years
Fuse
Blade terminal fuse nom
30A ATO
®
(257 030 Littelfuse)
Terminals and Wiring
Type Screw terminals
Solid wire nom 2.5-4mm
2
Stranded wire nom 2.5-4mm
2
American wire gauge max 12 AWG
Wire stripping length nom 7mm / 0.275”
Tightening torque nom 0.8Nm / 7lb.in
Ambient Temperature
Operation min +0°C to +40°C
Storage and transport min -20°C to +50°C
Instructions for Use and Disposal of the Battery
Place the battery module outside the cabinet or in the
coolest area when used inside the cabinet.
Use wires no smaller than 2.5mm
2
(or 12 AWG) and not
longer than 2x1.5m (cord length 1.5m).
Disconnect battery fuse before working on the battery
or on the DC-UPS.
To replace battery, loosen screw with only one turn and
slide the mounting bracket up.
For storage, installation and operation, the
requirements of the EN 50272-2 as well as other
national regulations must be observed.
Ensure sufficient ventilation for the battery.
Always dispose the batteries through a recycling
organisation. Batteries must be completely discharged
before recycling.
Dimensions and Weight (UZK12.071)
Width nom 155mm / 6.1“
Height nom 124mm / 4.88“
Depth nom 112mm / 4.41“
Weight max 3200g / 7.06lb
The DIN-rail height when used must be added to the depth
to calculate the total required installation unit depth.
Warranty
3 Year limited warranty except battery as battery is
considered as a service part. Special conditions are part of
our general terms and conditions. Do not store the battery
longer than 9 month without supplementary charge or
performance might change.
O N RDER UMBERS
M ARKINGS
UZK12.071
Battery module with battery
UZO12.07
Mounting kit without battery
UZB12.071
Battery replacement
GL
Marine, pending
Battery, terminal block,
cables, fuse and fuse
holder are UL-approved
components.
UZK12.071/ UZB12.071/ UZO12.07
–
U-Series
Battery Module 12V, 7Ah
September 2006 / Rev. 1.0 / DS-UZK12.071-EN / All parameters are specified at 25°C ambient unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
2/2
P D HYSICAL IMENSIONS
Fig. 1 Fig. 2 Front view Side view
P M ANEL/WALL OUNTING
Fig. 3 Detaching DIN-Rail brackets Fig. 4 Detach slide
Fig. 5 Panel/wall mount
Detach the two aluminium brackets by
removing the two screws with a Torx
screwdriver (Torx 10).
Remove the plastic lock mechanism by
using a flat-blade screwdriver to press
the lock downwards while pushing the
plastic slide upwards at the same time.
Detach the plastic slide.
Panel/wall mounting is possible by
using either the four holes on the
rear or the bottom of the unit.
See hole pattern below.
Fig. 6 Fig. 7 Rear hole pattern Bottom hole pattern

Produkt Specifikationer

Mærke: Puls Dimension
Kategori: UPS
Model: DIMENSION UZK12.071

Har du brug for hjælp?

Hvis du har brug for hjælp til Puls Dimension DIMENSION UZK12.071 stil et spørgsmål nedenfor, og andre brugere vil svare dig


UPS Puls Dimension Manualer

Puls Dimension

Puls Dimension DIMENSION UC10.241 Manual

20 August 2024
Puls Dimension

Puls Dimension DIMENSION UZK12.071 Manual

19 August 2024
Puls Dimension

Puls Dimension UB10.241 Manual

18 August 2024
Puls Dimension

Puls Dimension UB10.242 Manual

17 August 2024
Puls Dimension

Puls Dimension DIMENSION UBC10.241 Manual

17 August 2024
Puls Dimension

Puls Dimension DIMENSION UBC10.241-N1 Manual

17 August 2024
Puls Dimension

Puls Dimension DIMENSION UC10.242 Manual

16 August 2024
Puls Dimension

Puls Dimension UF20.241 Manual

16 August 2024

UPS Manualer

Nyeste UPS Manualer

APC

APC RBC150 Manual

2 April 2025
APC

APC RBC151 Manual

2 April 2025
APC

APC Symmetra LX 4kVA Manual

30 Marts 2025
APC

APC RBC145J Manual

29 Marts 2025
APC

APC RBC140J Manual

29 Marts 2025
APC

APC AP9922 Manual

29 Marts 2025
APC

APC RBC148 Manual

29 Marts 2025
Teltonika

Teltonika BAT120 Manual

30 Januar 2025
APC

APC BX1000M Manual

30 Januar 2025
APC

APC BX850 Manual

30 Januar 2025