Pyle PLMRSBA8 Manual

Pyle Modtager PLMRSBA8

Læs gratis den danske manual til Pyle PLMRSBA8 (5 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Pyle PLMRSBA8, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

PLMRSBA8

Marine Grade Slim Active Subwoofer

8” 600 Watts Low-Prole Active Amplied Marine

and Waterproof Subwoofer System

Suitable for Under-seat Installations

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

www.PyleUSA.com

2www.PyleUSA.com 3

Introduction

With the , we are introducing a low-prole amplied subwoofer. Low enough to PLMRSBA8

easily t below the seat of your car. This system oers you a quick and easy way to add a

high-powered subwoofer system to your audio system.

The integrated amplier in the features low pass crossovers, and a control forPLMRSBA8

adjusting the input sensitivity from 0.12V to 3.5V.

Both high level (speaker level) and low level (RCA type) inputs are present, making this a

universal solution for use with any head unit or other input source.

For further exibility in the use of a subwoofer, a variable bass boost control has been

included. You can control the subwoofer level with the remote level control module.

Mounting the Subwoofer

1. Find a suitable location in the vehicle in which to mount the amplier.

A typical location is shown below:

2. Make sure there is sucient air circulation around the intended mounting location.

3. Mark the location for mounting hole screws by positioning the cabinet where you wish to

install it. Make a small mark to identify the position and remove the unit. Thoroughly clean

the area you plan to attach the subwoofer, using a vacuum cleaner and press down on it

securely.

Vehicle seat

Control Panel and Features

1. POWER ON LED INDICATOR

2. PROTECT LED INDICATOR

3. PHASE SHIFT: Use this switch to help compensate for time alignment problems in the

system. Such problems usually result from having the subwoofer at a dierent distance

from the listener than the other speakers in the system.

4. AUTO POWER ON: In OFF mode, It’s not necessary to connect the remote cable if you’re

using the high level inputs. Do not function with the RCA inputs. However, we prefer the

direct remote wiring on a “plus after contact”.

5. LOW PASS FILTER: This control permits you dene the frequency range you want the

subwoofer amplier to receive. The subwoofer will reproduce all sound BELOW the

frequency you set. If the rest of your system is weak on the mids, you may wish to set this

control relatively high. If the midrange is well covered by the rest of your system, you will

probably want the subwoofer to only receive lower frequency signal.

6. BASS BOOST: The bass boost feature will increase the sound level the bass frequencies.

7. INPUT GAIN CONTROL: After you have installed your system, turn this control to minimum.

Turn the head unit on (and the subwoofer will turn on via the remote connection).

Turn the head unit volume to about 2/3 full level. Slowly turn up the subwoofer input gain

control until you hear a small amount of distortion. Then reduce the level until the

distortion is completely gone. Leave the control at this setting.

8. REMOTE LEVEL CONTROL PORT: Attach the included remote level control to cotrol the

volume level of the subwoofer independently.

9. HIGH LEVEL (speaker level) INPUTS: If your head unit does not have RCA outputs, you

can use the speaker outputs for the audio source for the PLMRSBA8. Use the supplied cable

and connect the outputs properly as shown in the connection diagram in this manual.

10. LOW LEVEL RCA INPUTS: Low level inputs are the recommended way to introduce the

audio signal to the subwoofer if RCA outputs are present on your head unit or other

signal source (such as a sound processor).

11. FUSE: The fuse is rated at 25A. Do not use a fuse with a dierent value and NEVER replace

the fuse with a wire or coin.

12. POWER TERMINALS

1 2 54 6 7 8 9 10 11 12

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Modtager
Model:	PLMRSBA8

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PLMRSBA8 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Pyle Manualer

26 August 2025

12 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

8 August 2025

8 August 2025

Pyle PLMRMBT7S Manual

30 Juni 2025

Pyle PATVR10 Manual

3 Juni 2025

Modtager Manualer

Nyeste Modtager Manualer

Perreaux Silhouette SXH2 Manual

13 September 2025

Perreaux Silhouette SXP2 Manual

13 September 2025

Perreaux Silhouette SX25i Manual

12 September 2025

Perreaux Silhouette SXV2 Manual

12 September 2025

Sony STR-DE635 Manual

12 September 2025

Perreaux Silhouette SX25 Manual

12 September 2025

Perreaux Audiant 80i Manual

12 September 2025

Samsung HW-C500 Manual

12 September 2025

Lab Gruppen CPA1202 Manual

12 September 2025

Sony STR-DH510 Manual

12 September 2025