QSC PL230A Manual

QSC Modtager PL230A

Læs nedenfor 📖 manual på dansk for QSC PL230A (35 sider) i kategorien Modtager. Denne guide var nyttig for 22 personer og blev bedømt med 4.9 stjerner i gennemsnit af 11.5 brugere

Download PDF

Side 1/35

User Manual

Manuel de l’utilisateur

Bedienhandbuch

Manual del Usario

•PL218A

• PL224A

• PL230A

• PL236A

PL2A Audio Power Amplifiers

with Analog Signal Processing

POWERLIGHT 2A

TD-000089-00

Rev.B

*TD-000089-00*

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous” voltage within the

product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside.

Refer servicing to qualified personnel.

WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.

FCC INTERFERENCE STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in

accordance to the instructions , may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by switching the equipment off & on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.