Qtx HIPAR-126 Manual

Qtx Lettelse HIPAR-126

Læs gratis den danske manual til Qtx HIPAR-126 (4 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Qtx HIPAR-126, eller vil du spørge andre brugere om produktet?

Side 1/4
www.avsl.com 154.325UK User Manual
HIPAR-126
Outdoor LED PAR Can RGBWA- UV
Item ref: 4.15 325UK
User Manual
Thank you for choosing the HIPAR-126 high-power LED PAR can fitted with 9pcs of 10W super bright 6-, a
in-1 COB LEDs built into an IP65 weatherproof housing for outdoor or indoor applications. Can be ,
operated standalone from the internal auto programs or via DMX512 controller is more precise control is
required. Pre-wired with waterproof power and DMX signal leads for easy connection and daisy-chaining.
Supplied with split bracket which can also be used as a floor stand. Ideal solution for parties and events
where background colour wash or U/V illumination is required.
In the box:
Your HIPAR-126 should arrive with you in a single carton in good cond T carton should contain ition. he
1 x main unit with bracket and screws, 1x remote contro 1 x UK IEC mains lead and 1 x user guide. l,
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the i and allow the unit to dry out naturally Qualified personnel should then ma ns .
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
C by misuse of product will be covered by warrantaused not y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 4.325 U r Manual 15 UK se
Installation:
The HIPAR- 6 is supplied with a dual hanging bracket, which can also be used as a free-standing 12
support.
When install g the fixture, ensure all fixings are secure, controls and connections are accessible and in
allow enough space for air to circulate around the housing. Do not aim directly in line of sight or very
close to people where the extremely bright output of the fi ure may be harmful to eyesight. xt
The HIPAR- 6 is IP65 weatherproof, and all electrical connections are hard-wired with waterproof 12
connectors. An XLR to waterproof connector is provided for adapting the DMX input lead to a
standard DMX signal input. A ma plug to waterproof connector is provided to adapt the power ins
input lead to a standard mains supply.
Connect the waterproof connectors securely, ensuring that the notches are aligned for correct
polarity.
The waterproof plugs have a threaded collar whic must be fully tightened onto the waterproof h
socket.
The HIPAR- 6 also has DMX through and power through leads for connecting onto further HIPAR 12
cans in a daisy-chain manner. Ensure that the mains power supply is capable of the total load of all
cans co ected. nn
Cleaning:
Use a soft cloth with a neutral detergent to clean the casing and lens as required
Do not use strong solvents for cleaning the unit
Rear panel controls:
Manual control menu:
Press the “MENUbutton to enter the s s menu. etting
Press “ ” and “ UP DOWN buttons to navigate through various setting functio ns.
P button save the desired setting. ress “ ENTER to


Produkt Specifikationer

Mærke: Qtx
Kategori: Lettelse
Model: HIPAR-126

Har du brug for hjælp?

Hvis du har brug for hjælp til Qtx HIPAR-126 stil et spørgsmål nedenfor, og andre brugere vil svare dig