Qtx PB-7 Manual

Qtx Lettelse PB-7

Læs gratis den danske manual til Qtx PB-7 (8 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Qtx PB-7, eller vil du spørge andre brugere om produktet?

Side 1/8
www.avslgroup.com 151.558UK
PB-7
High Power Foldable PAR Bar
Item ref: 151.558 UK
User Manual
Thank you for choosing this QTX PB-7 PAR bar. A foldable PAR bar kit fantastic for mobile DJs
and performers who need their lighting to be quick to set up and easily transportable. This
PAR bar boasts 4 high power Cans, each fitted with 7 x 3W RGB LEDs. Smooth colour blending
can be achieved by controlling with the included foot controller or via DMX.
In the box:
Your PB-7 should arrive to you in two separate cartons in good condition.
Carton 1:
PAR bar with 4 LED PAR Cans
Foot controller
Foam carry case
2 x IEC mains lead (UK and EU)
Carton 2:
35mmØ tripod stand
Stand bag
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments.
In the event of a spillage, disconnect the mains and allow the unit to dry out naturally.
Qualified personnel should then check the unit before continuing use.
Always check the correct voltage and the condition of the IEC lead before connecting to a
power outlet.
Always ensure any DMX leads used are in good condition with no short connections or
damaged plugs.
Please read through this manual thoroughly before use, any damage cause by
misuse of product will not be covered by warranty.
Please do not open cover, contain high voltage. This
product is not serviceable or repairable by end user.
Please refer to qualified personnel for service and repair.
www.avslgroup.com 151.558UK
Setup:
Release the clasp that holds the top bar in the folded position and unfold to the open position
as pictured below. There are two clasps at the back of the unit that need to be locked to keep
the top bar in the open position.
The opened top bar can now be place on to the supplied tripod stand and adjust to desired ed
height. Each LED PAR Can pans and tilts to face different directions and angles.
Back panel:
1. LCD Display
2. Manual control buttons
3. DMX signal in (DMX male socket)
4. DMX signal out (DMX female plug)
5. Foot controller socket
6. Built in m ic
7. IEC socket
8. Earth connection screw
DO NOT REMOVE


Produkt Specifikationer

Mærke: Qtx
Kategori: Lettelse
Model: PB-7

Har du brug for hjælp?

Hvis du har brug for hjælp til Qtx PB-7 stil et spørgsmål nedenfor, og andre brugere vil svare dig