Qtx Tri-Bar Manual

Qtx Lettelse Tri-Bar

Læs gratis den danske manual til Qtx Tri-Bar (4 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Qtx Tri-Bar, eller vil du spørge andre brugere om produktet?

Side 1/4
www.avsl.com 151. 3UK User Manual 59
Tri-Bar
3 Segment RGB LED Wall Bar
Item ref: 151.593UK
User Manual
Thank you for choosing the QTX -Bar with 18 high output RGB LEDs to provide colour washes and Tri
moving patterns against walls, ceilings or even floors. The 3 groups of 6 LEDs can be controlled by auto or
sound activated modes from preset internal colour sequences. Alternatively, the bar can be operated
remotely by DMX in either 3, 7 or 13 channel modes and connected to more units if a larger effect is
needed.
In the box:
Your -Bar s ld arrive with you in a single carton in good condition. T carton should contain Tri hou he
1 x main uni 2 fixing stand/brackets with thumbscrews, 1 x UK IEC mains lead and 1 x manual. t,
Warning:
To prevent risk of fire or electric shock, do not expo the unit to rain or damp environments. In the event se
of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo
check the unit before continuing use.
Please read rough this manual thoroughly before use, any dama th ge
cause by misuse of product will not be covered by warrantd y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 151.593UK User Manual
Placement:
Use the included mounting brackets to fix a stand or lighting truss. to
Use secondary safety fixings if mounting overhead.
Keep away from damp or dusty environments.
Ensure adequate airflow around the fixture housings.
Ensure ade ate access to controls and connections. qu
Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
Use a soft cloth with a neutral detergent to clean the casing as required.
Do not use strong solvents for cleaning the unit.
Side panel controls:
Manual control menu:
P ss the re ” buttoMENU n to enter the settings menu.
Press “ ” and UP DOWNbuttons to navigate through various setting functions .
P button confirm the desired setting. ress “ENTER to
Menu
Function
Description
d 001
d - d 001 512
DMX address settings
CH3/CH7/CH13
DMX channel selection
Au
Au00 - 16 Au
Automatic modes
FL
FL00 - FL09
Automatic mode strobe slow to fast
SP
SP00 - SP09
Automatic mode speed slow to fast
So
So01 - So02
Sound activated modes
Sn
Sn01 - 9 Sn0
Sound activated mode sensitivity adjustment low to high
DMX mode:
The -Bar can be controll by DMX signal, simply connect the DMX signal source the DMX input on Tri ed to
the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signa by looping vi a l
through the DMX out To enter DMX mode, select d001 from the menu and co m the correct on the unit. nfir
start address and channel selection using the and by “ ”UP “ ”DOWN buttons and The d on “ ”ENTER . “ ”
the LED display will begin to flash once it s received the DMX signal from the controller. This unit has 3, 7
or 13 DMX channels as indicated in the table below:


Produkt Specifikationer

Mærke: Qtx
Kategori: Lettelse
Model: Tri-Bar

Har du brug for hjælp?

Hvis du har brug for hjælp til Qtx Tri-Bar stil et spørgsmål nedenfor, og andre brugere vil svare dig