Qtx VHN2 Manual

Qtx Mikrofon VHN2

Læs gratis den danske manual til Qtx VHN2 (6 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Qtx VHN2, eller vil du spørge andre brugere om produktet?

Side 1/6
V-SERIES
VHF Wireless Systems
User Manual
Version 3.3
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
V-Series VHF Wireless User Manual
Introduction
Thank you for choosing the QTX Soun -series wireless system. This professional wireless set provides a high quality d VHF
microphone with VHF radio system for freedom of movement without loss of audio quality. Please read this manual
before using this equipment in order to avoid damage through incorrect operation and to get the best performance from
your purchase.
Contents:
Please take care when unpacking this product. Inspect for any damage and ensure you have the following components…
VHF wireless receiver
Mains power adapter
6.3mm mono jack lead
9V battery, PP3 (2 pieces for VH2, VN2 or VHN2)
Microphone / transmitter(s) see table below
Model
Stock code
Microphone 1
VH1
171.804 UK
Handheld transmitter
VH2
171.816 / 171.817 UK UK
Handheld transm ter it
VN1
171.836 / 171.837 UK UK
Neckband mic. + beltpack
VN2
171.818 / 171.819 UK UK
Neckband mic. + beltpack
VHN2
171.810 / 171.811 UK UK
Handheld transmitter
VL1
171.834 / 171.835UK UK
Lavalier mic. + beltpack
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by qualified
personnel before further use.
Avoid impact or heavy vibration to any of the components, dropping the microphone can cause capsule failure.
No user serviceable parts inside transmitter or receiver - refer servicing to qualified servi personnel. ce
Safety
Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as stated on the
adapter.
Avoid ingress of water or particles into the transmitter(s) or receiver
Use alkaline or NiMH batteries i the transmitter(s) and remove if unused for long periods. n
Observe the correct polarity when replacing batteries
Placement
Keep all components out of direct sunlight and away from heat sources.
Do not place heavy objects on top of the receiver or tr smitter(s) an
If rack-mounting, secure the receiver to a 1U rack tray and do not place heavy equipment above the receiver.
Keep the transmitter(s) and receiver away from damp or dusty environments.
Cleaning
Use a soft cloth with a neutral detergent to clean the body of the microphone/transmitter and receiver.
Lightly damp sterile wipes may be used on the microphone grille for hygiene purposes
To avoid damage, do not use solvents to clean the components


Produkt Specifikationer

Mærke: Qtx
Kategori: Mikrofon
Model: VHN2

Har du brug for hjælp?

Hvis du har brug for hjælp til Qtx VHN2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Qtx Manualer

Qtx

Qtx U-MIC-864.8-L Manual

28 September 2024
Qtx

Qtx VHN2 Manual

11 September 2024
Qtx

Qtx J-MIC Manual

31 August 2024
Qtx

Qtx MDU-40 Manual

5 August 2024
Qtx

Qtx VN2 Manual

8 Juli 2024
Qtx

Qtx U-MIC-863.2 Manual

5 August 2023
Qtx

Qtx VH1 Manual

3 Maj 2023
Qtx

Qtx U-MIC-863.2-L Manual

15 Marts 2023

Mikrofon Manualer

Nyeste Mikrofon Manualer