RetroSound Apache M2B Manual

RetroSound Bilradio Apache M2B

Læs gratis den danske manual til RetroSound Apache M2B (2 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om RetroSound Apache M2B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Radio Face Quick Start Guide

What’s in the Box Installation

Apache Face

Shafts

(2)

x(8)x(4) x(6)

Hardware

Backstrap must be mounted securely

Modern Sound For Your Classic

tech@retromanufacturing.com | help.retromanufacturing.com

Refer to the user’s manual included in your motor box or on our website for more comprehensive instructions.

(Vintage Dial Screen sold separately)

Plug the ribbon cable from the Radio Motor into the Radio Face. Attach the Radio Face

to the Radio Motor with the four small screws.

Apache Mode

(Vintage Dial Screen sold separately)

Control Layout Basic Operation

Modern Sound For Your Classic

tech@retromanufacturing.com | help.retromanufacturing.com

Setting Radio Presets

To store a preset on the Apache Radio Face, rotate the Right-Front Knob( ) to tune to the 3

desired station, then rotate the Right-Rear Knob( ) clockwise to select the desired preset (1-6). 4

Once selected, press the Right-Front Knob( ) to store.3

Recalling Radio Presets

To recall a preset, turn the Right-Rear Knob( ) clockwise and release. Repeat to move through 4

the saved presets.

The following steps must be performed to set up the Radio Motor to function with the Apache

Radio Face. With the vehicle’s ignition on, press the Left-Front Knob(

1) to turn the radio on. Press

and hold the Right-Front Knob(3) for 3 seconds to access the sub-menu. Rotate the Right-Front

Knob(3) to cycle through the choices until SEL PANEL appears then pre ss the Right-Front

Knob(3) to select. Rotate the Right-Front Knob(3) until is displayed on the screen. Let APACHE

the unit time out to set. Your Radio Motor is now configured to work with the Apache Radio Face.

Resetting SEL PANEL: If the incorrect option is selected reset your radio’s control mode. Press

and hold the Left-Front Knob(1) for approximately 15 seconds. The radio will reboot into SEL

PANEL mode. Press and release the Left-Front Knob(1) until appears on the screen. APACHE

Let the unit time out to set.

IMPORTANT FIRST STEP: Setting the radio’s control mode.

Power On/O󰀨

Press the Left-Front Knob( ) to power the unit on.1

Press and hold the Left-Front Knob(1) to power the unit o󰀨.

Volume

Rotate the Left-Front Knob( ) to change the volume.1

Changing Source Modes

Rotate the Left-Rear Knob( ) clockwise to cycle through the source modes.2

Changing Radio Bands

Rotate the Right-Rear Knob( ) counter-clockwise to cycle through the radio bands.4

Tune

Rotate the Right-Front Knob( ) to scroll through the stations.3

Mute On/O󰀨

Press the Right-Front Knob( ) to mute and unmute.3

Equalizer (EQ)

Press the Left-Front Knob( ) to enter the Tone Control sub-menu. Press and release the Left-1

Front Knob(1) until you see the EQ setting you’d like to adjust. Rotate the Left-Front Knob( ) to 1

adjust the setting. Press the Left-Front Knob( ) to move to the next item, and repeat to adjust 1

each option. Let the unit time out to set.

Setting the Clock

Press and hold the Right-Front Knob( ) to enter the System Settings sub-menu. Rotate the 3

Right-Front Knob( ) to cycle through the choices until you see CLK, then press the Right-3

Front Knob( ) to select. Rotate the Right-Front Knob( ) to adjust the hours. Then press the 3 3

Right-Front Knob( ) again to move on to minutes. Rotate the Right-Front Knob( ) to adjust the 3 3

minutes. Let the unit time out to set.

Display Color*

Press and hold the Right-Front Knob( ) to enter the System Settings sub-menu. Rotate the 3

Right-Front Knob( ) to cycle through the choices until you see SCAN, then press the Right 3

Front Knob( ) to cycle through the colors. Let the unit time out to set.3

Beep On/O󰀨

Press and hold the Right-Front Knob( ) to enter the System Settings sub-menu. Rotate the 3

Right-Front Knob( ) to cycle through the choices until you see BEEP ON/OFF, then press the 3

Right-Front Knob( ) to choose between BEEP ON or BEEP OFF.3

*Some features are not available on all radios.

1 Left-Front Knob

Right-Front Knob 32 Left-Rear Knob

Right-Rear Knob 4

Radio Face Quick Start Guide

Radio Presets

Produkt Specifikationer

Mærke:	RetroSound
Kategori:	Bilradio
Model:	Apache M2B

Har du brug for hjælp?

Hvis du har brug for hjælp til RetroSound Apache M2B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilradio RetroSound Manualer

RetroSound Grand Prix Manual

10 August 2024

RetroSound Newport Manual

10 August 2024

RetroSound New York Manual

10 August 2024

RetroSound Redondo RS Manual

10 August 2024

RetroSound Wonderbar 3 Manual

10 August 2024

RetroSound Wonderbar 1 M1 Manual

9 August 2024

RetroSound RetroRadio M2 Manual

9 August 2024

RetroSound Redondo-RT M2 Manual

9 August 2024

RetroSound Newport M2 Manual

9 August 2024

RetroSound Grand Prix M2 Manual

9 August 2024

Bilradio Manualer

Nyeste Bilradio Manualer

Blaupunkt GTr 135 A Manual

28 Juli 2025

Blaupunkt Oslo 600 DAB Manual

28 Juli 2025

Blaupunkt GTr 115 A Manual

27 Juli 2025

Sencor SCT 4055MR Manual

26 Juli 2025

Marquant MCR-1407 Manual

23 Juli 2025

Harman Kardon CH140 Manual

23 Juli 2025

Rockville RXD-F30 Manual

22 Juli 2025

Rockville RXD-F20 Manual

22 Juli 2025

Harman Kardon CH161 Manual

22 Juli 2025

Harman Kardon CR151 Manual

22 Juli 2025