RIKON 10-345 Manual

RIKON Ikke kategoriseret 10-345

Læs gratis den danske manual til RIKON 10-345 (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om RIKON 10-345, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

18” Woodworking Bandsaw

Model: 10-345

For more information:

www.rikontools.com info@rikontools.com or

For Parts or Questions:

techsupport@rikontools.com 877-884-5167or

Record the serial number and date of purchase

in your manual for future reference.

Serial number:

Date of purchase:

Part #10-345M3

Operator Safety: Required Reading

IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following

instructions must be followed at all times.

There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied and/

or used for any other application other than that for which it was designed. If you have any questions about its application,

do not use the tool until you have contacted us and we have advised you.

General Safety Warnings

KNOW YOUR POWER TOOL. Read the owner’s manual carefully. Learn the tool’s applications, work

capabilities, and its specic potential hazards.

ALWAYS KEEP VISITORS AWAY FROM RUNNING MACHINES.

All visitors should be kept a safe distance from the work area.

ALWAYS MAKE THE WORKSHOP CHILDPROOF.

Childproof with padlocks, master switches, or by removing starter keys.

NEVER OPERATE A TOOL WHILE UNDER THE INFLUENCE OF DRUGS,

MEDICATION, OR ALCOHOL.

ALWAYS WEAR PROPER APPAREL.

Never wear loose clothing or jewelry that might get caught in moving parts. Rubber-soled footwear is

recommended for the best footing.

ALWAYS USE SAFETY GLASSES AND WEAR HEARING PROTECTION.

Also use a face or dust mask if the cutting operation is dusty.

NEVER OVERREACH.

Keep your proper footing and balance at all times.

ALWAYS GROUND ALL TOOLS.

If your tool is equipped with a three-pronged plug, you must plug it into a three-hole electric receptacle.

If you use an adapter to accommodate a two-pronged receptacle, you must attach the adapter plug to a

known ground. Never remove the third prong of the plug.

ALWAYS AVOID DANGEROUS ENVIRONMENTS.

Never use power tools in damp or wet locations. Keep your work area well lighted and clear of clutter.

ALWAYS REMOVE THE ADJUSTING KEYS AND WRENCHES FROM TOOLS AFTER USE.

Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before

turning it on.

ALWAYS KEEP YOUR WORK AREA CLEAN. Cluttered areas and benches invite accidents.

NEVER STAND ON TOOLS.

Serious injury could occur if the tool is tipped or if the cutting tool is accidentally

Produkt Specifikationer

Mærke:	RIKON
Kategori:	Ikke kategoriseret
Model:	10-345

Har du brug for hjælp?

Hvis du har brug for hjælp til RIKON 10-345 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret RIKON Manualer

RIKON 10-345 Manual

4 Marts 2025

RIKON 70-1824VSR2 Manual

6 December 2024

3 Oktober 2024

3 Oktober 2024

3 Oktober 2024

2 Oktober 2024

5 September 2024

RIKON 70-150VSR Manual

1 September 2024

RIKON 70-1516VSR Manual

1 September 2024

RIKON 70-3040 Manual

31 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Life On Products LCAEA011 Manual

16 Juni 2025

Philips TAT2719 Manual

16 Juni 2025

Life On Products LCAF001 Manual

16 Juni 2025

Playtive IAN 303900 Manual

16 Juni 2025

Planet Audio PC35B Manual

16 Juni 2025

Philips SCF205 Manual

16 Juni 2025

Enrock Marine EMC56W Manual

16 Juni 2025

Playtive IAN 115579 Manual

16 Juni 2025

Playtive IAN 425617 Manual

16 Juni 2025

Life On Products LCAF017 Manual

16 Juni 2025