RIKON 70-1824VSR2 Manual

RIKON Ikke kategoriseret 70-1824VSR2

Læs gratis den danske manual til RIKON 70-1824VSR2 (40 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8 anmeldelser. Har du et spørgsmål om RIKON 70-1824VSR2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

www.rikontools.com

70-1824VSRM5

18” x 24” VSR Lathes

Operator’s Manual

Serial Number: _________________________ Date of purchase: _________________________

For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877) 884-5167

Record the serial number and date of purchase in your manual for future reference.

The serial number can be found on the specication label on the rear of your machine.

1.75HP, 115V and 2.5HP, 230V Models

TABLE OF CONTENTS

SPECIFICATIONS 70-1824VSR & 70-1824VSR2

NOTE: The specications, photographs, drawings and information in this manual represent the current model when the manual was

prepared. Changes and improvements may be made at any time, with no obligation on the part of RIKON Power Tools, Inc. to modify

previously delivered units. Reasonable care has been taken to ensure that the information in this manual is correct, to provide you with

the guidelines for the proper safety, assembly and operation of this machine.

Specifications 2

Safety Instructions 3 - 7

Electricals & Wiring Diagram 5, 6, 24 & 25

Getting To Know Your Machine 8

Contents of Package 8 & 9

Installation 9

As sem bly 10 - 12

Operation 13 - 17

Adjustments 18 - 22

Maintenance 23

Troubleshooting 26 - 28

N o t e s 2 8

Parts Diagrams & Parts Lists 29 - 36

Accessories 37 - 39

Warranty 39

Motor Speed (no load) 1,720 RPM

Recommended Breaker Size 20 Amp

Spindle Rotation Forward/Reverse

Swing Over Bed 18”(457 mm)

Swing Over Tool Rest Base 13-3/4” (350 mm)

Distance Between Centers 24” (610 mm)

Speeds Variable 50 - 3,850 RPM

Speed Ranges (3) 50 - 900; 100 - 1,850; 200 - 3,850 RPM

Spindle Nose Threading 1-1/4” x 8 TPI RH

Headstock Taper MT-2

Tailstock Taper MT-2

Hole Through Drive Spindle 3/8” (10 mm)

Hole Through Tailstock 3/8” (10 mm)

Tailstock RAM Travel Quill 4-1/2" (115 mm)

Number of Indexing Positions 24 (15 Degrees)

Headstock Rotation 180 Degrees

Tool Rest Post Diameter 1” (25.4 mm)

Spindle to Floor Distance 43-5/16“ (1100 mm)

Overall Height 47-3/8” (1205 mm)

Overall Length 63” (1600 mm)

Overall Width 24-3/8” (620 mm)

Outboard Swing Over Bed Extension (optional) 27-1/2” (700 mm)

Outboard Swing Over Tool Rest Base 23-1/2” (600 mm)

Outboard Swing 90° Forward Over Stand Leg 44” (1118 mm)

Base / Legs Size (LxW) 47-1/4” x 24-3/8” (1120 x 620 mm)

Net Weight 373 lbs (169 kgs)

Country of Origin China

Motor TEFC 1.75 HP 2.5 HP

Volts, Phase (Input/Output) 115 V, 3/1 Ph 230 V, 3 Ph

Amps, Hertz 16 A, 50/60 Hz 14 A, 50/60 Hz

Produkt Specifikationer

Mærke:	RIKON
Kategori:	Ikke kategoriseret
Model:	70-1824VSR2

Har du brug for hjælp?

Hvis du har brug for hjælp til RIKON 70-1824VSR2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret RIKON Manualer

RIKON 10-345 Manual

4 Marts 2025

RIKON 70-1824VSR2 Manual

6 December 2024

3 Oktober 2024

3 Oktober 2024

3 Oktober 2024

2 Oktober 2024

5 September 2024

RIKON 70-150VSR Manual

1 September 2024

RIKON 70-1516VSR Manual

1 September 2024

RIKON 70-3040 Manual

31 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan 1048C Manual

16 Juni 2025

Playtive IAN 91495 Manual

16 Juni 2025

Playtive IAN 270612 Manual

16 Juni 2025

Playtive IAN 315026 Manual

16 Juni 2025

Playtive IAN 115585 Manual

16 Juni 2025

Playtive 10464 Manual

16 Juni 2025

Playtive HG03821 Manual

16 Juni 2025

Martin VC-Strip Manual

16 Juni 2025

Playtive HG06316 Manual

16 Juni 2025

Playtive HG05102 Manual

16 Juni 2025