RIKON 70-1824VSR Manual

RIKON Ikke kategoriseret 70-1824VSR

Læs gratis den danske manual til RIKON 70-1824VSR (40 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 9 anmeldelser. Har du et spørgsmål om RIKON 70-1824VSR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

www.rikontools.com

70-1824VSRM3

18” x 24” VSR Lathes

Operator’s Manual

Serial Number: _________________________ Date of purchase: _________________________

For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877) 884-5167

Record the serial number and date of purchase in your manual for future reference.

The serial number can be found on the specication label on the rear of your machine.

1.75HP, 115V and 2.5HP, 230V Models

TABLE OF CONTENTS

SPECIFICATIONS # 70-1824VSR & 70-1824VSR2

NOTE: The specications, photographs, drawings and information in this manual represent the current model when the manual was

prepared. Changes and improvements may be made at any time, with no obligation on the part of RIKON Power Tools, Inc. to modify

previously delivered units. Reasonable care has been taken to ensure that the information in this manual is correct, to provide you with

the guidelines for the proper safety, assembly and operation of this machine.

Specications..................................................................................................................... 2

Safety Instructions ........................................................................................................ 3 - 7

Electricals & Wiring Diagram .............................................................................. 5, 6, 24 & 25

Getting To Know Your Machine .............................................................................................. 8

Contents of Package ................................................................................................. 8 & 9

Installation ..................................................................................................................... 9

Assembly .................................................................................................................. 10 - 12

Operation .................................................................................................................. 13 - 17

Adjustments............................................................................................................... 18 - 22

Maintenance .................................................................................................................... 23

Troubleshooting ....................................................................................... 26 - 28

Notes ......................................................................................................................... 28

Parts Diagrams & Parts Lists ................................................................................. 29 - 36

Accessories ............................................................................................................ 37 & 38

Warranty .......................................................................................................................... 39

Motor TEFC ....................................................... 1.75 HP ..........................2.5 HP

Volts, Phase (Input/Output) ........................ 115 V, 3/1 Ph ................. 230 V, 3 Ph

Amps, Hertz ............................................. 16 A, 50/60 Hz .............14 A, 50/60 Hz

Motor Speed (no load) ................................................................ 1,720 RPM

Recommended Breaker Size ........................................................... 20 Amp

Spindle Rotation .............................................................. Forward/Reverse

Swing Over Bed ....................................................................... 18”(457 mm)

Swing Over Tool Rest Base............................................... 13-3/4” (350 mm)

Distance Between Centers...................................................... 24” (610 mm)

Speeds ................................................................. Variable 50 - 3,850 RPM

Speed Ranges (3) .......................... 50 - 900; 100 - 1,850; 200 - 3,850 RPM

Spindle Nose Threading.....................................................1-1/4” x 8 TPI RH

Headstock Taper .................................................................................. MT-2

Tailstock Taper ..................................................................................... MT-2

Hole Through Drive Spindle ..................................................... 3/8” (10 mm)

Hole Through Tailstock ............................................................ 3/8” (10 mm)

Tailstock RAM Travel Quill .................................................. 4-1/2" (115 mm)

Number of Indexing Positions.............................................. 24 (15 Degrees)

Headstock Rotation .................................................................. 180 Degrees

Tool Rest Post Diameter ...........................................................1” (25.4 mm)

Spindle to Floor Distance ............................................. 43-5/16“ (1100 mm)

Overall Height ................................................................. 47-3/8” (1205 mm)

Overall Length ...................................................................... 63” (1600 mm)

Overall Width .................................................................... 24-3/8” (620 mm)

Outboard Swing Over Bed Extension (optional) ............... 27-1/2” (700 mm)

Outboard Swing Over Tool Rest Base .............................. 23-1/2” (600 mm)

Outboard Swing 90° Forward Over Stand Leg ...................... 44” (1118 mm)

Base / Legs Size (LxW) ........................ 47-1/4” x 24-3/8” (1120 x 620 mm)

Net Weight ........................................................................ 373 lbs (169 kgs)

Produkt Specifikationer

Mærke:	RIKON
Kategori:	Ikke kategoriseret
Model:	70-1824VSR

Har du brug for hjælp?

Hvis du har brug for hjælp til RIKON 70-1824VSR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret RIKON Manualer

RIKON 10-345 Manual

4 Marts 2025

RIKON 70-1824VSR2 Manual

6 December 2024

3 Oktober 2024

3 Oktober 2024

3 Oktober 2024

2 Oktober 2024

5 September 2024

RIKON 70-150VSR Manual

1 September 2024

RIKON 70-1516VSR Manual

1 September 2024

RIKON 70-3040 Manual

31 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 332975 Manual

16 Juni 2025

Playtive HG05527 Manual

16 Juni 2025

Philips 75PUH6393 Manual

16 Juni 2025

Foster Slimline FSL400L Manual

16 Juni 2025

Playtive HG04098 Manual

16 Juni 2025

Aiphone JPW-BA Manual

16 Juni 2025

Life On Products LCAF020 Manual

16 Juni 2025

Hager CEA263U Manual

16 Juni 2025

Moulinex Illico DJE241 Manual

16 Juni 2025

Foster Slimline FSL800M Manual

16 Juni 2025