Roland CY-18DR Manual

Roland Ikke kategoriseret CY-18DR

Læs gratis den danske manual til Roland CY-18DR (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Roland CY-18DR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT

NOTES” (p. 4). After reading, keep the document(s) where it will be available for

immediate reference.

Owner’s Manual

Making the Settings

Check the Included Items

After opening the package, check that all of the included items are

present. If anything is missing, contact your dealer.

CY-18DR

Wing nut

Felt washer

Stopper

Connection cable

Cable tie

Owner’s manual (this document)

CY-18DR Components

Bell

Bow

Edge

FUNC button (*1)

DIGITAL TRIGGER OUT connector

(*1) This button will be used in the event of a future upgrade.

* It is not normally used.

Mounting on the Stand

1. Use a commercially available drum key to tighten the

stopper bolt.

The stopper keeps the V-Cymbal from turning, preventing the

tangling of cables on the stand.

Stopper

Attach the stopper

so that the bolt is on

the right-hand side,

from the performer’s

perspective.

Bolt

Tighten the bolt

with a commercially

available drum key.

2. Attach the V-Cymbal, while positioning it so the Roland

logo is located on the side opposite the performer.

Wing nut

Felt washer

Position the Roland logo

on the opposite side of the

playing area

3. Tighten the included felt washer and the wing nut to

obtain the desired movement.

* Use the included felt washer and wing nut.

* Double sounding may occur if the wing nut is loose.

4. Insert the plug of the connection cable into the CY-18DR’s

DIGITAL TRIGGER OUT connector.

Connection cable

Protector

Use the protector to lock the

connection.

5. Secure the cables in place with the cable tie.

Leave some slack in the cables to ensure they are not pulled by the

movement of the V-Cymbal pads.

Be sure to make this

small plastic hook

visible from you.

Wind a cable tie around a cable.

Wind a cable tie around the pipe and

tighten it in order to not to slip.

Insert the small

plastic hook to a

hole to secure the

cable to the cymbal arm.

Secure the cable in place

with the cable tie

k in the cableLeave some slac

* Take care to ensure that the cables do not touch the V-Cymbal

pads and/ or the stand. A cable touching a V-Cymbal pad or a

stand may cause double sounding or other incorrect operation.

Produkt Specifikationer

Mærke:	Roland
Kategori:	Ikke kategoriseret
Model:	CY-18DR

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland CY-18DR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Roland Manualer

Roland SRX KEYBOARDS Manual

3 August 2025

Roland R-88 Manual

3 August 2025

Roland GALAXIAS Manual

3 August 2025

Roland SRX DANCE TRAX Manual

3 August 2025

Roland TR-808 Manual

3 August 2025

Roland SRX ELECTRIC PIANO Manual

3 August 2025

Roland SRX WORLD Manual

3 August 2025

Roland SRX PIANO II Manual

2 August 2025

Roland SRX BRASS Manual

2 August 2025

Roland PM-3 Manual

2 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vivax SM-2000X Manual

17 August 2025

Ulsonix AIRCLEAN 40G Manual

17 August 2025

DoorBird D2100E Manual

17 August 2025

BEKO EFT5100W Manual

17 August 2025

Guede GRD 500/R Manual

17 August 2025

MSW -WOOHS-E3600K Manual

17 August 2025

Physa FR-4 Manual

17 August 2025

Cressi Aquapro 5 Manual

17 August 2025

AEG ABE4502C Manual

17 August 2025

Singercon SIN-ALD-1500 Manual

17 August 2025