Roland F-30 Manual

Roland Ikke kategoriseret F-30

Læs gratis den danske manual til Roland F-30 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Roland F-30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

DIGITAL PIANO Date: Oct 8, 2002

Model:F-30 Version 1.00MIDI IMPLEMENTATION

1. Receive Data

■Channel Voice Messages

●Note o

Status 2nd byte 3rd byte

8nH kkH vvH

9nH kkH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

kk = note number : 00H-7FH (0-127)

vv = note o velocity : 00H-7FH (0-127)

* The velocity values of Note O messages are ignored.

●Note on

Status 2nd byte 3rd byte

9nH kkH vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

kk = note number : 00H-7FH (0-127)

vv = note on velocity : 01H-7FH (1-127)

* Note numbers outside the range of 15-113 are transposed to the nearest octave within

this range.

* Transpose function does not aect the recognized note numbers.

●Control Change

* The value specied by a Control Change message will not be reset even by a Program

Change, etc.

❍Data Entry (Controller number 6, 38)

Status 2nd byte 3rd byte

BnH 06H mmH

BnH 26H llH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

mm, ll = the value of the parameter specied by RPN

❍Volume (Controller number 7)

Status 2nd byte 3rd byte

BnH 07H vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Volume : 00H-7FH (0-127), Initial Value = 7FH (127)

* Received volume messages aect received note event levels, and cannot aect internal

keyboard notes.

❍Expression (Controller number 11)

Status 2nd byte 3rd byte

BnH 0BH vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Expression : 00H-7FH (0-127), Initial Value = 7FH (127)

* These message can aect only MIDI notes.

❍Hold 1 (Controller number 64)

Status 2nd byte 3rd byte

BnH 40H vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Control value : 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON

* These message can aect only MIDI notes.

❍Sostenuto (Controller number 66)

Status 2nd byte 3rd byte

BnH 42H vvH

n=MIDI channel number : 0H-FH (ch.1-ch.16)

vv=Control value : 00H-7FH (0-127) 0-63 = OFF 64-127 = ON

* These message can aect only MIDI notes.

❍Soft (Controller number 67)

Status 2nd byte 3rd byte

BnH 43H vvH

n=MIDI channel number : 0H-FH (ch.1-ch.16)

vv=Control value : 00H-7FH (0-127) 0-63 = OFF 64-127 = ON

* These message can aect only MIDI notes.

❍Eect 1 (Reverb Send Level) (Controller number 91)

Status 2nd byte 3rd byte

BnH 5BH vvH

n=MIDI channel number : 0H-FH (ch.1-ch.16)

vv=Control value : 00H-7FH (0-127) 0-63 = OFF 64-127 = ON

❍RPN MSB/LSB (Controller number 100, 101)

Status 2nd byte 3rd byte

BnH 65H mmH

BnH 64H llH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

mm = upper byte of parameter number specied by RPN(MSB)

ll = lower byte of parameter number specied by RPN(LSB)

* The value specied by RPN will not be reset even by messages such as Program Change

or Reset All Controller.

* *RPN**

The RPN (Registered Parameter Number) messages are expanded control changes, and each

function of an RPN is described by the MIDI Standard.

To use these messages, you must rst use RPN MSB and RPN LSB messages to specify the

parameter to be controlled, and then use Data Entry messages to specify the value of the

specied parameter. Once an RPN parameter has been specied, all Data Entry messages

received on that channel will modify the value of that parameter. To prevent accidents, it is

recommended that you set RPN Null (RPN Number = 7FH/7FH) when you have nished

setting the value of the desired parameter.

On the F-30, RPN can be used to modify the following parameters.

RPN Data entry

MSB LSB MSB LSB Explanation

00H 01H mmH llH Master Fine Tuning

mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.99 cents),

Initial Value = 40 00H (±0 cent)

7FH 7FH --- --- RPN null

Set condition where RPN and NRPN are unspecied.

The data entry messages after set RPN null will be ignored.

(No Data entry messages are required after RPN null).

Settings already made will not change.

mm, ll: ignored

DIGITAL PIANO Date: Oct 8, 2002 Model:F-30 MIDI IMPLEMENTATION Version 1.00

●Program Change

Status 2nd byte

CnH ppH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

pp = Program number : 00H..40H (prog.1..prog.65)

Received program change message are assigned as follows.

prog. tone

----------------------------------

1 Grand Piano

2 Bright Piano

3 Stage Rhodes

4 E.Piano

5 Harpsichord

6 Organ Flute

7 Pipe Organ

8 Rotaly Organ

9 Strings

10 Choir

11 ---

12 Grand Piano + Stage Rhodes

13 Grand Piano + E.Piano

14 Grand Piano + Harpsichord

15 Grand Piano + Organ Flute

16 Grand Piano + Pipe Organ

17 Grand Piano + Rotaly Organ

18 Grand Piano + Strings

19 Grand Piano + Choir

20 Bright Piano + Stage Rhodes

21 Bright Piano + E.Piano

22 Bright Piano + Harpsichord

23 Bright Piano + Organ Flute

24 Bright Piano + Pipe Organ

25 Bright Piano + Rotaly Organ

26 Bright Piano + Strings

27 Bright Piano + Choir

28 ---

29 Stage Rhodes + Harpsichord

30 Stage Rhodes + Organ Flute

31 Stage Rhodes + Pipe Organ

32 Stage Rhodes + Rotaly Organ

33 Stage Rhodes + Strings

34 Stage Rhodes + Choir

35 E.Piano + Harpsichord

36 E.Piano + Organ Flute

37 E.Piano + Pipe Organ

38 E.Piano + Rotaly Organ

39 E.Piano + Strings

40 E.Piano + Choir

41 ---

42 Harpsichord + Pipe Organ

43 Harpsichord + Rotaly Organ

44 Harpsichord + Strings

45 Harpsichord + Choir

46 Organ Flute + Pipe Organ

47 Organ Flute + Rotaly Organ

48 Organ Flute + Strings

49 Organ Flute + Choir

50 ---

51 Pipe Organ + Strings

52 Pipe Organ + Choir

53 Rotaly Organ + Strings

54 Rotaly Organ + Choir

55 ---

56 Acoustic Bass | Grand Piano

57 Strings | Grand Piano

58 Vibraphone

59 Electric Bass | Stage Rhodes

60 Clavi

61 Strings | Harpsichord

62 Strings | Pipe Organ

63 Rotary Organ | Jazz Organ

64 Strings + Brass

65 Strings | Flute

* “A+B” means tones for dual, and “A|B” means tones for split.

* “---” and any program number other than those listed above are ignored.

* After a Program Change message is received, the sound will change beginning with the

next Note-on. Voices already sounding when the Program Change message was

received will not be aected.

■Channel Mode Messages

●Reset All Controllers (Controller number 121)

Status 2nd byte 3rd byte

BnH 79H 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* When this message is received, the following controllers will be set to their reset

values.

Controller Reset value

Expression 127 (max)

Hold 1 0 (o)

Sostenuto 0(o)

Soft 0(o)

●Local Control (Controller number 122)

Status 2nd byte 3rd byte

BnH 7AH vvH

n=MIDI channel number : 0H - FH (ch.1 - ch.16)

vv=Value : 00H, 7FH (0, 127) 0=OFF 127=ON

●All Notes O (Controller number 123)

Status 2nd byte 3rd byte

BnH 7BH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* When All Notes O is received, all notes on the corresponding channel will be

turned o. However if Hold 1 or Sostenuto is ON, the sound will be continued until

these are turned o.

●OMNI OFF (Controller number 124)

Status 2nd byte 3rd byte

BnH 7CH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* The instrument will behave in the same way as it does when an “All Notes O” message

is received. The mode will be OMNI OFF, POLY(Mode 3).

●OMNI ON (Controller number 125)

Status 2nd byte 3rd byte

BnH 7DH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* The instrument will behave in the same way as it does when an “All Notes O” message

is received. The mode will be OMNI ON, POLY(Mode 1).

●MONO (Controller number 126)

Status 2nd byte 3rd byte

BnH 7EH mmH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

mm = mono number : 00H-10H (0-16)

* The same processing will be carried out as when All Notes O is received.

●POLY (Controller number 127)

Status 2nd byte 3rd byte

BnH 7FH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

* The same processing will be carried out as when All Notes O is received.

Produkt Specifikationer

Mærke:	Roland
Kategori:	Ikke kategoriseret
Model:	F-30

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland F-30 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Roland Manualer

Roland ATUP-EX Manual

9 Juni 2025

Roland PD-10X Manual

1 Juni 2025

Roland VH-11 Manual

31 Maj 2025

Roland PD-12X Manual

31 Maj 2025

Roland GO:KEYS 3 IN Manual

20 Marts 2025

Roland FD-7 Manual

28 Februar 2025

Roland Space Echo RE-201 Manual

27 Februar 2025

Roland VR-3EX Manual

26 Februar 2025

Roland KSFE50 Manual

20 Februar 2025

Roland KS-V7 Manual

30 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox Airvox SW695 Manual

15 Juni 2025

Stiga SBC 635 KD Manual

15 Juni 2025

Cleveland 36CGM300 Manual

15 Juni 2025

Gourmia GTF7970 Manual

15 Juni 2025

Planet Audio P9630B Manual

15 Juni 2025

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025

Lavex 842CD12VST12 Manual

15 Juni 2025

Marshall RCP-PLUS Manual

15 Juni 2025

Hughes & Kettner BassForce XL Manual

15 Juni 2025

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025