Roland KD-A22 Manual

Roland Ikke kategoriseret KD-A22

Læs gratis den danske manual til Roland KD-A22 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Roland KD-A22, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Owner’s Manual

Watch the Quick Start Video

“Installing the KD-A22”

http://roland.cm/kd-a22

Introduction

The KD-A22 can be installed on a 22-inch acoustic bass drum.

Fully assembled view

* A 22-inch acoustic bass drum is not included with this product.

When using a drum stand (MDS-50K/MDS-50KV)

For the MDS-50K/MDS-50KV, the spacing of the bass drum installation area

is as follows.

Vertical: 590 mm (23-1/4”)

Horizontal: 620 mm (24-7/16”)

620 mm

(24-7/16”)

590 mm

(23-1/4”)

Check the Included Items

After opening the package, check that all of the included items are

present. If anything is missing, contact your dealer.

Front head

Batter head

NOTE

Do not pull the cable that is attached to the batter head.

Batter board

NOTE

A circuit board is attached to the batter board. To prevent injury,

damage, or accident, observe the following points.

5Do not touch the circuit board with your ngers.

5Do not lay down the batter board with the circuit board facing

downward.

5Do not apply excessive force to the circuit board.

Batter hoop

* Batter board spacers (6 pcs.) are

already attached

Batter board stopper x 4

Connection cable

Drum key

Before using this unit, carefully read “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (p. 6). After reading, keep the document(s) where it will

be available for immediate reference.

Installing the KD-A22

Caution during installation

5Before you begin the installation procedure, lay down a mat to

protect the oor or the drum from scratches.

5When turning the bass drum upside down, take care not to drop

it or let it overturn.

5Muting (such as using weights or a blanket) is not necessary.

Remove such materials from the bass drum. Also, do not install

muting after installing the KD-A22.

1. Attaching the Batter Head

1. Place the bass drum so that the striking surface head is

upward.

2. Loosen the lugs, and remove the hoop and head.

3. Place the batter head on the shell so that the hole in the

batter head is positioned as shown in the illustration.

NOTE

This placement of the batter head assumes that you are using

a single pedal. If you are using a twin pedal, you might need

to adjust the batter head hole position depending on the kick

pedal that you are using. For details, refer to “Using double kick

pedals” (p. 5).

Adjust the position of the batter

head so that the pin is aligned with

the center of the shell as shown in

the illustration.

Hole Pin

Top

4. Place the batter hoop on the batter head, and adjust the

position of the batter hoop so that the centers of the

batter hoop and batter head are aligned.

Place the batter hoop on the

batter head so that the pedal

attachment hardware is at this

location.

5. Move the batter board spacers attached to the batter

hoop to the positions shown in the illustration.

For a bass drum with eight lugsFor a bass drum with ten lugs

6. Working alternately across opposite sides of the drum,

lightly tighten each lug until the lugs do not wobble.

7. Then tighten each lug another 3/4 of a turn to secure the

batter head.

NOTE

If the batter head is not secured suciently, the sensor might

malfunction, or the sound of the strike might be too loud.

8. Move the batter board spacers attached to the batter

hoop in the directions shown by the arrows, so that they

rmly contact the lugs.

For a bass drum with eight lugsFor a bass drum with ten lugs

Produkt Specifikationer

Mærke:	Roland
Kategori:	Ikke kategoriseret
Model:	KD-A22

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland KD-A22 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Roland Manualer

Roland ATUP-EX Manual

9 Juni 2025

Roland PD-10X Manual

1 Juni 2025

Roland VH-11 Manual

31 Maj 2025

Roland PD-12X Manual

31 Maj 2025

Roland GO:KEYS 3 IN Manual

20 Marts 2025

Roland FD-7 Manual

28 Februar 2025

Roland Space Echo RE-201 Manual

27 Februar 2025

Roland VR-3EX Manual

26 Februar 2025

Roland KSFE50 Manual

20 Februar 2025

Roland KS-V7 Manual

30 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet Audio P100CPA Manual

15 Juni 2025

Sabrent BK-MAC2 Manual

15 Juni 2025

Planet Audio P9950CPA Manual

15 Juni 2025

Filmcity FC-CTH-01 Manual

15 Juni 2025

Cleveland 22CGT6 Manual

15 Juni 2025

Auray SVRK-4U-S Manual

15 Juni 2025

Bobrick B-2860 Manual

15 Juni 2025

Sony ODBK-103 Manual

15 Juni 2025

Planet Audio P70CPA Manual

15 Juni 2025

Gourmia GAF657 Manual

15 Juni 2025