Roland KR-377 Manual

Roland Ikke kategoriseret KR-377

Læs gratis den danske manual til Roland KR-377 (22 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Roland KR-377, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/22

DIGITAL PIANO Date: June. 1, 2000

Model HP-557R Version: 1.00MIDI Implementation

KR-277/377/577/977/1077

1. Receive data

* Messages for which [model name] is indicated are applicable only to that specic model.

Messages for which [other than KR-277] is indicated are applicable to units other than

the KR-277 (i.e., the HP-557R, KR-377/577/977/1077).

■Channel Voice Messages

●Note o

Status 2nd byte 3rd byte

8nH kkH vvH

9nH kkH 00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note o velocity: 00H-7FH (0-127)

* For Drum Parts, these messages are received when Rx.NOTE OFF = ON for each

Instrument.

* The velocity values of Note O messages are ignored.

●Note on

Status 2nd bytes 3rd byte

9nH kkH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note on velocity: 01H-7FH (1-127)

* Not received when Rx.NOTE MESSAGE = OFF. (Initial value is ON)

* For Drum Parts, not received when Rx.NOTE ON = OFF for each Instrument.

●Polyphonic Key Pressure

Status 2nd bytes 3rd byte

AnH kkH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = key pressure: 00H-7FH (0-127)

* Not received when Rx.POLY PRESSURE (PAf) = OFF. (Initial value is ON)

* The resulting eect is determined by System Exclusive messages. With the initial

settings, there will be no eect.

●Control Change

* When Rx.CONTROL CHANGE = OFF, all control change messages except for Channel

Mode messages will be ignored.

* The value specied by a Control Change message will not be reset even by a Program

Change, etc.

❍Bank Select (Controller number 0, 32)

Status 2nd bytes 3rd byte

BnH 00H mmH

BnH 20H llH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm, ll = Bank number: 00H, 00H-7FH, 7FH (bank.1-bank.16384), Initial Value = 00 00H

(bank.1)

* Not received when Rx.BANK SELECT = OFF.

* "Rx.BANK SELECT" is set to OFF by "GM1 System On," and Bank Select message will be

ignored.

* "Rx.BANK SELECT" is set to ON by "GM2 System On."

* "Rx.BANK SELECT" is set to ON by power-on Reset or by receiving "GS RESET."

* When Rx.BANK SELECT LSB = OFF, Bank number LSB (llH) will be handled as 00H

regardless of the received value. However, when sending Bank Select messages, you

have to send both the MSB (mmH) and LSB (llH, the value should be 00H) together.

* Bank Select processing will be suspended until a Program Change message is received.

* The GS format "Variation number" is the value of the Bank Select MSB (Controller

number 0) expressed in decimal.

* Some other GS devices do not recognize the Bank Select LSB (Controller number 32).

❍Modulation (Controller number 1)

Status 2nd bytes 3rd byte

BnH 01H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Modulation depth: 00H-7FH (0-127)

* Not received when Rx.MODULATION = OFF. (Initial value is ON)

* The resulting eect is determined by System Exclusive messages. With the initial

settings, this is Pitch Modulation Depth.

❍Portamento Time (Controller number 5)

Status 2nd bytes 3rd byte

BnH 05H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Portamento Time: 00H-7FH (0-127), Initial value = 00H (0)

* This adjusts the rate of pitch change when Portamento is ON or when using the

Portamento Control. A value of 0 results in the fastest change.

❍Data Entry (Controller number 6, 38)

Status 2nd bytes 3rd byte

BnH 06H mmH

BnH 26H llH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm, ll = the value of the parameter specied by RPN/NRPN

mm = MSB, ll = LSB

❍Volume (Controller number 7)

Status 2nd bytes 3rd byte

BnH 07H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Volume: 00H-7FH (0-127), Initial Value = 64H (100)

* Volume messages are used to adjust the volume balance of each Part.

* Not received when Rx.VOLUME = OFF. (Initial value is ON)

❍Pan (Controller number 10)

Status 2nd bytes 3rd byte

BnH 0AH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = pan: 00H-40H-7FH (Left-Center-Right), Initial Value = 40H (Center)

* For Rhythm Parts, this is a relative adjustment of each Instrument's pan setting.

* Some Tones are not capable of being panned all the way to the left or right.

* Not received when Rx.PANPOT = OFF. (Initial value is ON)

❍Expression (Controller number 11)

Status 2nd bytes 3rd byte

BnH 0BH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Expression: 00H-7FH (0-127), Initial Value = 7FH (127)

* This adjusts the volume of a Part. It can be used independently from Volume messages.

Expression messages are used for musical expression within a performance;

e.g., expression pedal movements, crescendo and decrescendo.

* Not received when Rx.EXPRESSION = OFF. (Initial value is ON)

❍Hold 1 (Controller number 64)

Status 2nd bytes 3rd byte

BnH 40H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127)

* Not received when Rx.HOLD1 = OFF. (Initial value is ON)

❍Portamento (Controller number 65)

Status 2nd bytes 3rd byte

BnH 41H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON

* Not received when Rx.PORTAMENTO = OFF. (Initial value is ON)

Produkt Specifikationer

Mærke:	Roland
Kategori:	Ikke kategoriseret
Model:	KR-377

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland KR-377 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Roland Manualer

Roland FV-500H Manual

1 Oktober 2025

Roland RDH-130 Manual

11 September 2025

Roland RT-MicS Manual

10 September 2025

Roland JUNO-106 House Manual

28 August 2025

Roland MC-707 Manual

27 August 2025

Roland DH-10 Manual

27 August 2025

Roland DV-7DLC Manual

27 August 2025

Roland SR-JV80-09 Manual

20 August 2025

Roland SH-2 Manual

20 August 2025

Roland SO-DA4 Manual

20 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Jane BLW Manual

24 Oktober 2025

Kanto PS200 Manual

24 Oktober 2025

Microchip PIC24HJ12GP201 Manual

24 Oktober 2025

Microchip TC4420 Manual

24 Oktober 2025

Calor Pure Force 3en1 DT8765 Manual

24 Oktober 2025

Hikvision DS-QAE1A40G1-VB Manual

23 Oktober 2025

Microchip HV2818 Manual

23 Oktober 2025

Microchip MIC2298 Manual

23 Oktober 2025

Microchip PIC16F630 Manual

23 Oktober 2025

ADATA Valor Air Mera Edition Manual

23 Oktober 2025