Roland KR-577 Manual

Roland Ikke kategoriseret KR-577

Læs gratis den danske manual til Roland KR-577 (22 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Roland KR-577, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/22

DIGITAL PIANO Date: June. 1, 2000

Model HP-557R Version: 1.00MIDI Implementation

KR-277/377/577/977/1077

1. Receive data

* Messages for which [model name] is indicated are applicable only to that specic model.

Messages for which [other than KR-277] is indicated are applicable to units other than

the KR-277 (i.e., the HP-557R, KR-377/577/977/1077).

■Channel Voice Messages

●Note o

Status 2nd byte 3rd byte

8nH kkH vvH

9nH kkH 00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note o velocity: 00H-7FH (0-127)

* For Drum Parts, these messages are received when Rx.NOTE OFF = ON for each

Instrument.

* The velocity values of Note O messages are ignored.

●Note on

Status 2nd bytes 3rd byte

9nH kkH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note on velocity: 01H-7FH (1-127)

* Not received when Rx.NOTE MESSAGE = OFF. (Initial value is ON)

* For Drum Parts, not received when Rx.NOTE ON = OFF for each Instrument.

●Polyphonic Key Pressure

Status 2nd bytes 3rd byte

AnH kkH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = key pressure: 00H-7FH (0-127)

* Not received when Rx.POLY PRESSURE (PAf) = OFF. (Initial value is ON)

* The resulting eect is determined by System Exclusive messages. With the initial

settings, there will be no eect.

●Control Change

* When Rx.CONTROL CHANGE = OFF, all control change messages except for Channel

Mode messages will be ignored.

* The value specied by a Control Change message will not be reset even by a Program

Change, etc.

❍Bank Select (Controller number 0, 32)

Status 2nd bytes 3rd byte

BnH 00H mmH

BnH 20H llH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm, ll = Bank number: 00H, 00H-7FH, 7FH (bank.1-bank.16384), Initial Value = 00 00H

(bank.1)

* Not received when Rx.BANK SELECT = OFF.

* "Rx.BANK SELECT" is set to OFF by "GM1 System On," and Bank Select message will be

ignored.

* "Rx.BANK SELECT" is set to ON by "GM2 System On."

* "Rx.BANK SELECT" is set to ON by power-on Reset or by receiving "GS RESET."

* When Rx.BANK SELECT LSB = OFF, Bank number LSB (llH) will be handled as 00H

regardless of the received value. However, when sending Bank Select messages, you

have to send both the MSB (mmH) and LSB (llH, the value should be 00H) together.

* Bank Select processing will be suspended until a Program Change message is received.

* The GS format "Variation number" is the value of the Bank Select MSB (Controller

number 0) expressed in decimal.

* Some other GS devices do not recognize the Bank Select LSB (Controller number 32).

❍Modulation (Controller number 1)

Status 2nd bytes 3rd byte

BnH 01H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Modulation depth: 00H-7FH (0-127)

* Not received when Rx.MODULATION = OFF. (Initial value is ON)

* The resulting eect is determined by System Exclusive messages. With the initial

settings, this is Pitch Modulation Depth.

❍Portamento Time (Controller number 5)

Status 2nd bytes 3rd byte

BnH 05H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Portamento Time: 00H-7FH (0-127), Initial value = 00H (0)

* This adjusts the rate of pitch change when Portamento is ON or when using the

Portamento Control. A value of 0 results in the fastest change.

❍Data Entry (Controller number 6, 38)

Status 2nd bytes 3rd byte

BnH 06H mmH

BnH 26H llH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm, ll = the value of the parameter specied by RPN/NRPN

mm = MSB, ll = LSB

❍Volume (Controller number 7)

Status 2nd bytes 3rd byte

BnH 07H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Volume: 00H-7FH (0-127), Initial Value = 64H (100)

* Volume messages are used to adjust the volume balance of each Part.

* Not received when Rx.VOLUME = OFF. (Initial value is ON)

❍Pan (Controller number 10)

Status 2nd bytes 3rd byte

BnH 0AH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = pan: 00H-40H-7FH (Left-Center-Right), Initial Value = 40H (Center)

* For Rhythm Parts, this is a relative adjustment of each Instrument's pan setting.

* Some Tones are not capable of being panned all the way to the left or right.

* Not received when Rx.PANPOT = OFF. (Initial value is ON)

❍Expression (Controller number 11)

Status 2nd bytes 3rd byte

BnH 0BH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Expression: 00H-7FH (0-127), Initial Value = 7FH (127)

* This adjusts the volume of a Part. It can be used independently from Volume messages.

Expression messages are used for musical expression within a performance;

e.g., expression pedal movements, crescendo and decrescendo.

* Not received when Rx.EXPRESSION = OFF. (Initial value is ON)

❍Hold 1 (Controller number 64)

Status 2nd bytes 3rd byte

BnH 40H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127)

* Not received when Rx.HOLD1 = OFF. (Initial value is ON)

❍Portamento (Controller number 65)

Status 2nd bytes 3rd byte

BnH 41H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON

* Not received when Rx.PORTAMENTO = OFF. (Initial value is ON)

❍Sostenuto (Controller number 66)

Status 2nd bytes 3rd byte

BnH 42H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON

* Not received when Rx.SOSTENUTO = OFF. (Initial value is ON)

❍Soft (Controller number 67)

Status 2nd bytes 3rd byte

BnH 43H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON

* Not received when Rx.SOFT = OFF. (Initial value is ON)

* Some Tones will not exhibit any change.

❍Filter Resonance (Timbre/Harmonic Intensity) (Controller number 71)

Status 2nd byte 3rd byte

BnH 47H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv= Resonance value (relative change) : 00H-7FH(-64 - 0 - +63),

Initial value = 40H (no change)

* Some Tones will not exhibit any change.

❍Release Time (Controller number 72)

Status 2nd byte 3rd byte

BnH 48H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Release Time value (relative change) : 00H-7FH(-64 - 0 - +63),

Initial value = 40H (no change)

* Some Tones will not exhibit any change.

❍Attack time (Controller number 73)

Status 2nd byte 3rd byte

BnH 49H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Attack time value (relative change) : 00H-7FH(-64 - 0 - +63),

Initial value=40H (no change)

* Some Tones will not exhibit any change.

❍Cuto (Controller number 74)

Status 2nd byte 3rd byte

BnH 4AH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Cuto value (relative change) : 00H-7FH(-64 - 0 - +63),

Initial value = 40H (no change)

* Some Tones will not exhibit any change.

❍Decay Time (Controller number 75)

Status 2nd byte 3rd byte

BnH 4BH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Decay Time value (relative change) : 00H-7FH(-64 - 0 - +63),

Initial value = 40H (no change)

* Some Tones will not exhibit any change.

❍Vibrato Rate (Controller number 76)

Status 2nd byte 3rd byte

BnH 4CH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Vibrato Rate value (relative change) : 00H-7FH(-64 - 0 - +63),

Initial value = 40H (no change)

* Some Tones will not exhibit any change.

❍Vibrato Depth (Controller number 77)

Status 2nd byte 3rd byte

BnH 4DH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Vibrato Depth Value (relative change) : 00H-7FH(-64 - 0 - +63),

Initial Value = 40H (no change)

* Some Tones will not exhibit any change.

❍Vibrato Delay (Controller number 78)

Status 2nd byte 3rd byte

BnH 4EH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Vibrato Delay value (relative change) : 00H-7FH(-64 - 0 - +63),

Initial value=40H (no change)

* Some Tones will not exhibit any change.

❍Portamento control (Controller number 84)

Status 2nd bytes 3rd byte

BnH 54H kkH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = source note number: 00H-7FH (0-127)

* A Note-on received immediately after a Portamento Control message will change

continuously in pitch, starting from the pitch of the Source Note Number.

* If a voice is already sounding for a note number identical to the Source Note Number,

this voice will continue sounding (i.e., legato) and will, when the next Note-on is

received, smoothly change to the pitch of that Note-on.

* The rate of the pitch change caused by Portamento Control is determined by the

Portamento Time value.

Example 1.

On MIDI Description Result

90 3C 40 Note on C4 C4 on

B0 54 3C Portamento Control from C4 no change (C4 voice still sunding)

90 40 40 Note on E4 glide from C4 to E4

80 3C 40 Note o C4 no change

80 40 40 Note o E4 E4 o

Example 2.

On MIDI Description Result

B0 54 3C Portamento Control from C4 no change

90 40 40 Note on E4 E4 is played with glide from C4 to E4

80 40 40 Note o E4 E4 o

❍Eect 1 (Reverb Send Level) (Controller number 91)

Status 2nd bytes 3rd byte

BnH 5BH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127), Initial Value = 28H (40)

* This message adjusts the Reverb Send Level of each Part.

❍Eect 3 (Chorus Send Level) (Controller number 93)

Status 2nd bytes 3rd byte

BnH 5DH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127), Initial Value = 00H (0)

* This message adjusts the Chorus Send Level of each Part.

Produkt Specifikationer

Mærke:	Roland
Kategori:	Ikke kategoriseret
Model:	KR-577

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland KR-577 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Roland Manualer

Roland S-0808 Manual

16 Juni 2025

Roland ATUP-EX Manual

9 Juni 2025

Roland PD-10X Manual

1 Juni 2025

Roland VH-11 Manual

31 Maj 2025

Roland PD-12X Manual

31 Maj 2025

Roland GO:KEYS 3 IN Manual

20 Marts 2025

Roland FD-7 Manual

28 Februar 2025

Roland Space Echo RE-201 Manual

27 Februar 2025

Roland VR-3EX Manual

26 Februar 2025

Roland KSFE50 Manual

20 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Life On Products LCAEA011 Manual

16 Juni 2025

Philips TAT2719 Manual

16 Juni 2025

Life On Products LCAF001 Manual

16 Juni 2025

Playtive IAN 303900 Manual

16 Juni 2025

Planet Audio PC35B Manual

16 Juni 2025

Philips SCF205 Manual

16 Juni 2025

Enrock Marine EMC56W Manual

16 Juni 2025

Playtive IAN 115579 Manual

16 Juni 2025

Playtive IAN 425617 Manual

16 Juni 2025

Life On Products LCAF017 Manual

16 Juni 2025