Roland KSC-90 Manual

Roland Ikke kategoriseret KSC-90

Læs gratis den danske manual til Roland KSC-90 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Roland KSC-90, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

USING THE UNIT SAFELY

Used for instructions intended to alert the

user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic animals

or pets.

Used for instructions intended to alert the

user to the risk of death or severe injury

should the unit be used improperly.

The symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In the

case of the symbol at left, it means that the power-cord

plug must be unplugged from the outlet.

The symbol alerts the user to important instructions or

warnings.The specific meaning of the symbol is

determined by the design contained within the triangle. In

the case of the symbol at left, it is used for general

cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be

carried out (are forbidden). The specific thing that must

not be done is indicated by the design contained within

the circle. In the case of the symbol at left, it means that

the unit must never be disassembled.

About WARNING and CAUTION Notices About the Symbols

ALWAYS OBSERVE THE FOLLOWING

WARNING

Do not disassemble or modify by yourself

Do not carry out anything unless you are

instructed to do so in the owner’s manual.

Otherwise, you risk causing malfunction.

Do not repair or replace parts by yourself

Refer all servicing to your retailer, the

nearest Roland Service Center, or an

authorized Roland distributor, as listed on

the “Information.”

Do not use or store in the following types of

locations

• Subject to temperature extremes (e.g.,

direct sunlight in an enclosed vehicle,

near a heating duct, on top of heat-

generating equipment); or are

• Damp (e.g., baths, washrooms, on wet

 oors); or are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and shakiness;

or are

• Placed in a poorly ventilated location.

Do not place in an unstable location

Otherwise, you risk injury as the result of

the unit toppling over or dropping down.

Be cautious to protect children from injury

Always make sure that an adult is on hand

to provide supervision and guidance when

using the unit in places where children

are present, or when a child will be using

the unit.

Do not drop or subject to strong impact

Otherwise, you risk causing damage or

malfunction.

CAUTION

Use the stand only for the speci ed products

This stand is designed speci cally to be

used with the Roland FP-90. If used in

combination with other products, you

risk sustaining injuries as the result of the

product dropping down or toppling over

due to a lack of stability.

Evaluate safety issues before using stands

Even if you observe the cautions given

in the owner’s manual, certain types of

handling may allow this product to fall

from the stand, or cause the stand to

overturn. Please be mindful of any safety

issues before using this product.

Avoid climbing on top of the unit, or placing heavy

objects on it

Otherwise, you risk injury as the result of

the unit toppling over or dropping down.

Keep small items out of the reach of children

To prevent accidental ingestion of the

parts listed below, always keep them out of

the reach of small children.

• Included Parts

Screws

IMPORTANT NOTES

Placement

• Do not allow lighting devices that normally are

used while their light source is very close to the unit

(such as a piano light), or powerful spotlights to

shine upon the same area of the unit for extended

periods of time. Excessive heat can deform or

discolor the unit.

• Do not paste stickers, decals, or the like to this

instrument. Peeling such matter o the instrument

may damage the exterior  nish.

• Depending on the material and temperature of the

surface on which you place the unit, its rubber feet

may discolor or mar the surface.

Maintenance

• To clean the unit, use a dry, soft cloth; or one that

is slightly dampened. Try to wipe the entire surface

using an equal amount of strength, moving the

cloth along with the grain of the wood. Rubbing

too hard in the same area can damage the  nish.

• Never use benzine, thinners, alcohol or solvents of

any kind, to avoid the possibility of discoloration

and/or deformation.

• As with any wood-crafted product, some expansion

and contraction of the wood can occur depending

on the way the unit is used and the environment

in which it is used. Over time, this can cause some

of the screws to start coming loose. To ensure safe,

worry-free use of the unit, you should periodically

check the tightness of the screws shown in the

illustration.

Cautions When Moving the Piano

• You must use two or more people when moving

the piano.

• Before moving the piano, disconnect the AC

adaptor and other cables.

• Keep the piano level when lifting it.

• Be careful not to pinch your hands or drop the

piano on your feet.

Before using this stand, carefully read the sections entitled “USING THE UNIT SAFELY” “IMPORTANT NOTES.” and Additionally this manual

should be saved and kept on hand as a convenient reference.

5Make sure that another person is on hand to help with the assembly and setup.

Be very careful, when you assemble and move the piano, to make sure that you do not drop it on your hands or feet.

5Prepare an area in which you can perform the assembly safely.

Do not use a power tool (e.g., an electric screwdriver) to assemble the stand. You risk damaging or stripping the

screws.

5The KSC-90 is designed specically to be used with the FP-90.

Parts Check

Before you begin assembling the stand, check that all the parts ere

supplied.

ASide board (left) 1 pcs.

BSide board (right) 1 pcs.

CCenter board 1 pcs.

DHeadphone hook 1 pcs.

1Screw (M5 x 20 mm) 6 pcs.“a”

2Screw (M4 x 16 mm) 2 pcs.“b”

3Knob bolt 4 pcs.

Assembly Procedure

* You will also need to have a Phillips screwdriver.

* Fasten each screw tightly, then place the stand in a stable and horizontal

place.

* Do not allow the pedal cord or power cord to get twisted or pinched while

assembling the stand.

* This document explains the specications of the product at the time that the

document was issued. For the latest information, refer to the Roland website.

1 Stand Assembly

At rst, assemble the entire stand in a temporary fashion, without really

tightening the screws. Then, after checking the overall alignment of the

boards (and gently shifting certain parts where necessary), go around

and tightly fasten each of the screws.

1. Attach the side board (left) for the left sides to the center

board (so that the metal parts face inside) using screws “a”

(M5 x 20 mm).

2. Use screws (M5 x 20 mm) to attach the side board (right) “a”

in the same way.

Center board

Side board (left)

Side board (right)

Position the metal parts

of the center board so

that they face the rear.

Screw “a”

(x 6) *

Front

Rear

2 Installing the Piano on the Stand

1. Set the piano on the stand, then rmly attach the four knob

bolts.

* When handling the piano, rmly grasp it. Be careful, so you do not get your

ngers pinched.

Knob bolt (x 4)

Side board

Underneath the

Piano

Please don’t get your ngers

pinched!

2. Use two screws (M4 x 16 mm) to fasten the headphone “b”

hook.

Screw x 2“b”

Owner’s Manual

Keyboard stand for FP-90 KSC-90

WARNING

This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US (Proposition 65)

* 5100054187- 01* 11

Produkt Specifikationer

Mærke:	Roland
Kategori:	Ikke kategoriseret
Model:	KSC-90
Produktfarve:	Sort
Placering:	Gulv
Formål:	Tastatur
Låsbare hjul:	Ingen

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland KSC-90 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Roland Manualer

Roland SRX KEYBOARDS Manual

3 August 2025

Roland R-88 Manual

3 August 2025

Roland GALAXIAS Manual

3 August 2025

Roland SRX DANCE TRAX Manual

3 August 2025

Roland TR-808 Manual

3 August 2025

Roland SRX ELECTRIC PIANO Manual

3 August 2025

Roland SRX WORLD Manual

3 August 2025

Roland SRX PIANO II Manual

2 August 2025

Roland SRX BRASS Manual

2 August 2025

Roland PM-3 Manual

2 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet IHD-420PT Manual

17 August 2025

Vulcan VBB1BF Manual

17 August 2025

Noyafa NF-981 Manual

17 August 2025

MSW -WOOHS-7HP Manual

17 August 2025

MSW -PCPAIR 400 Manual

17 August 2025

Graef HM 508 Manual

17 August 2025

MSW -HFCV-40 Manual

17 August 2025

Guede GRD 300.1/R Manual

17 August 2025

MSW -GE 18000 POWER Manual

17 August 2025

MSW -CRF30-BT Manual

17 August 2025