Roland MV8-OP1 Manual


Læs gratis den danske manual til Roland MV8-OP1 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Roland MV8-OP1, eller vil du spørge andre brugere om produktet?

Side 1/16
Using the MV8-OP1
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.
Roland International Web Site: http://www.Roland.com
Contents
About the MV8-OP1 ................................................................. 2
Panel Descriptions .................................................................. 3
Installing the MV8-OP1............................................................ 4
Installation de la MV8-OP1
(French language for Canadian Safety Standard) ...................................... 6
Using the MV8-OP1.................................................................. 8
Outputting analog audio from analog multi output.................. 8
Inputting audio via a digital connection (coaxial/optical) ........ 8
Transferring digital audio via R-BUS ...................................... 9
Connections and settings for R-BUS devices ...................... 12
2MV-8800 Using the MV8-OP1
About the MV8-OP1
The MV8-OP1 AUDIO I/O EXPANSION (sold separately) is an expansion board that adds six analog
multi-outputs, digital inputs (coaxial type and optical type), and an R-BUS connector to the MV-8800.
Installing the MV8-OP1 adds the following functionality.
You can digitally connect a digital audio device (CD player, MD player, DAT recorder) and sample
without impairing the audio quality.
You can input digital audio of a variety of sampling frequencies.
* Since the MV8-OP1 contains a sampling rate converter, there is no limitation on the sampling frequencies that can
be input. All signals will be converted to 44.1 kHz.
You can connect devices that have an R-BUS connector, such as the Roland VS-2480CD or XV-5080,
for digital audio input/output via R-BUS (2-channel input / 8-channel output).
You can individually output the audio signals of the MV-8800 to its multi outputs. This is convenient
when you are using the MV-8800 with an external mixer. (Analog output and R-BUS output are all
available.)
When used with the DIF-AT24 (sold separately), an additional MIDI IN and OUT (16 channels) is added.
* Don’t connect the R-BUS connector to an RMDB connector, SCSI connector, RS-232C connector, or parallel
connector. Doing so will cause malfunctions.
* Don’t connect or disconnect the R-BUS connector while the power is turned on. Doing so will cause malfunctions.


Produkt Specifikationer

Mærke: Roland
Kategori: Ikke kategoriseret
Model: MV8-OP1

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland MV8-OP1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Roland Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Alpine

Alpine IVA-C800R Manual

17 August 2025
ZyXEL

ZyXEL XGS1935-28 Manual

17 August 2025
Alpine

Alpine TUE-T200DVB Manual

17 August 2025
Crelando

Crelando HG06256E Manual

17 August 2025
Nabo

Nabo FK 2570 Manual

17 August 2025
Primo

Primo PR164RKZ Manual

17 August 2025
IFM

IFM CR1142 Manual

17 August 2025