Roland S-OPT Manual


Læs gratis den danske manual til Roland S-OPT (18 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Roland S-OPT, eller vil du spørge andre brugere om produktet?

Side 1/18
Owner’s Manual
S-OPT is a REAC optical converter that converts RSS Digital Snake System REAC
signals to and from optical signals for long-distance digital audio transmission. By
using this REAC optical converter and optical cables (sold separately), the REAC
transmission distance can be extended to a maximum of 2 kilometers.
S-OPT has the following properties:
The S-OPT optical connectors are Neutrik OpticalCon connectors and support
Mobile Fiber Cable from Neutrik. This optical interface provides for transmitting
RSS Digital Snake System’s mobility.
Because the OpticalCon connector also provides a Dual LC optical connector
(standard LC-Duplex connector, IEC 61754-20), less expensive optical cables
can be used for permanent installations of the RSS Digital Snake System.
Two S-OPT units can be connected using the proprietary POWER LINK cable
(ARC-15, sold separately) so that redundant power can be supplied from one
or is damaged, both units will still continue to operate.
Main Specifications
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
Before using this unit, carefully read the sections entitled: “IMPORTANT
SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3–4), and
“IMPORTANT NOTES” (p. 5). These sections provide important information
concerning the proper operation of the unit. Additionally, in order to ensure
that you have gained a good grasp of every feature provided by your new
unit, the Owner’s Manual should be read in its entirety. The manual should be
saved and kept on hand as a convenient reference.
* 0 4 7 8 5 5 6 7 - 0 1 *
04785567 07-10-1N
2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
WARNING:
IMPORTANT:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured
BLACK.
THIS APPARATUS MUST BE EARTHED
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE
For the U.K.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.


Produkt Specifikationer

Mærke: Roland
Kategori: Ikke kategoriseret
Model: S-OPT

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland S-OPT stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Roland Manualer

Roland

Roland S-OPT Manual

22 Juni 2025
Roland

Roland SRI-2 Manual

22 Juni 2025
Roland

Roland ST-CMS1 Manual

21 Juni 2025
Roland

Roland V-1600HD Manual

21 Juni 2025
Roland

Roland KS-V8 Manual

20 Juni 2025
Roland

Roland VC-300HD Manual

17 Juni 2025
Roland

Roland F-1 Manual

17 Juni 2025
Roland

Roland S-2416 Manual

17 Juni 2025
Roland

Roland PDS-2 Manual

17 Juni 2025
Roland

Roland R-44 Manual

16 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer