Roland System-500 572 Manual

Roland Ikke kategoriseret System-500 572

Læs nedenfor 📖 manual på dansk for Roland System-500 572 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
English
Owners Manual
Before using this unit, carefully read leaet “USING THE UNIT SAFELY.
Copyright © 2015 ROLAND CORPORATION
Model SYS-512 SYS-521 SYS-530 SYS-540 SYS-572
Current Draw 70 mA (+12 V)
55 mA (-12 V)
40 mA (+12 V)
40 mA (-12 V)
50 mA (+12 V)
35 mA (-12 V)
85 mA (+12 V)
50 mA (-12 V)
110 mA (+12 V)
90 mA (-12 V)
Power Supply Eurorack power
Dimensions 80.8 (W) × 128.5 (D) × 57.2 (H) mm
3-3/16 (W) x 5-1/16 (D) x 2-1/4 (H) inches
Weight 212 g 203 g 194 g 202 g 213 g
8 oz 8 oz 7 oz 8 oz 8 oz
Accessories Owner’s Manual, Leaet “USING THE UNIT SAFELY, Installation screws (4 pcs.), Eurorack power cable
In the interest of product improvement, the specications and/or appearance of this unit are subject to change without prior notice.
Main Specications Roland SYSTEM-500 (SYS-512, SYS-521, SYS-530, SYS-540, SYS-572) : Eurorack Modular
The documentation for this unit consists of the following materials.
5USING THE UNIT SAFELY (separate leaet)
Read this rst. It contains notes that you must observe in order to use the unit correctly.
5Owners Manual (this document)
This explains how to make connections, and describes the specications of the unit.
5Parameter Guide (English PDF)
This explains the various parts of the unit. Download it as described at right.
About the Manuals
CV stands for “Control Voltage, an electrical signal (control voltage) that modies
the behavior of an analog synth or Eurorack module. GATE is a trigger signal that
controls the beginning and end of an envelope or other control voltage.
CV / GATE Input
Use the included screws (4 pcs.) to attach the unit to your Eurorack case at the
locations indicated.
CAUTION
7Keep small items out of the reach of
children
To prevent accidental ingestion
of the parts listed below, always
keep them out of the reach of small
children.
5Included Parts: Eurorack installation screws
Installing in a Eurorack Case
By using the included Eurorack power cable, you can operate this unit on the
Eurorack’s system power supply (+12 V).
1. Grasp the 16-pin connector of the Eurorack power cable, and insert it into
the Eurorack’s power connector so that the red wire is aligned with the -12
V pin.
2. Grasp the 10-pin connector of the Eurorack
power cable, and insert it into the units
power connector so that the red wire is
aligned with the white line on the unit.
RED SIDE
RED SIDE
WHITE LINE
WARNING
7Electrocution hazard
* Always turn the Eurorack unit o and unplug the power cord
before plugging the Eurorack power cable.
* Do not touch the electrical terminals when attaching the Eurorack power
cable.
Using a Eurorack Power Cable
Obtaining the owner’s manual (PDF version)
1. Enter the following URL on your computer.
http://www.roland.com/manuals/
2. Select the name of your product.
* 5 1 0 0 0 4 7 2 8 8 - 0 1 *


Produkt Specifikationer

Mærke: Roland
Kategori: Ikke kategoriseret
Model: System-500 572

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland System-500 572 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Roland Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer