Roland UA-4FX2 Manual

Roland Ikke kategoriseret UA-4FX2

Læs gratis den danske manual til Roland UA-4FX2 (31 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Roland UA-4FX2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/31

Owner’s Manual

UA-4FX2

Before using this unit, carefully read “USING THE UNIT SAFELY” (p. 16) and “IMPORTANT NOTES” (p. 17). After reading, keep the document(s) where it will

be available for immediate reference.

Contents of the Package

5UA-4FX2

5Owner’s Manual (this document)

5USB cable

Installing the Driver

* Do not use a micro USB cable that is designed only for charging a device. Charge-only cables cannot transmit data.

Windows 10 Users

1. Use the included USB cable to connect the UA-4FX2 to your computer.

The driver is installed automatically.

Windows 7 or Windows 8.1 Users

NOTE

Don’t connect the UA-4FX2 to your computer before installing the driver.

If you’ve already connected the UA-4FX2, temporarily disconnect it.

When the screen indicates “Ready to install the driver. ---,” connect the UA-4FX2.

1. Start up Windows with all USB cables disconnected other than the cables of your keyboard and mouse.

2. Download the driver from the following URL.

http://roland.cm/ua4fx2

3. Before you begin installation, close all applications.

4. Unpack the downloaded Zip le, and double-click “Setup.”

5. If a user account control conrmation screen appears, click [Yes].

6. In the dialog box that indicates “UA-4FX2 Driver will be installed on your computer. ---,” click [Next].

* If any other message appears, proceed as directed by the message.

7. To begin installation, click [Next].

8. If a Windows security dialog box appears, click [Install].

9. Note the dialog box that indicates “Ready to install the driver. ---”

* If any other message appears, proceed as directed by the message.

10. Use the included USB cable to connect the UA-4FX2 to your computer.

The driver is installed automatically.

11. In the dialog box that indicates “Installation has been completed.”, click [Close].

12. If the “System Settings Change” dialog box appears, click [Yes] and restart Windows.

Produkt Specifikationer

Mærke:	Roland
Kategori:	Ikke kategoriseret
Model:	UA-4FX2
Bredde:	146 mm
Dybde:	110 mm
Højde:	42 mm
Vægt:	240 g
Brugervejledning:	Ja
Produktfarve:	Black,Grey
Formfaktor:	Desktop
Kabler inkluderet:	USB
Strømkilde:	USB
Enhedsgrænseflade:	USB
Antal USB-porte:	1
Lydindgang:	2
Lydudgang:	2
Lyd A/D konverter (ADC):	24-bit/48kHz
Understøttede stikprøver:	44.1,48,96,192 kHz