Sanyo LNS-T02E Manual

Sanyo Tilbehør til projektor LNS-T02E

Læs gratis den danske manual til Sanyo LNS-T02E (4 sider) i kategorien Tilbehør til projektor. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Sanyo LNS-T02E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PARTS LIST

Following parts are contained in the packing.

· LENS

· LENS MOUNTING SCREWS

· DRIVER

· LIGHT-BLOCK SHEET

· LENS COVER (UPPER · LOWER )

NOTES ON LENS INSTALLATION

LCD PROJECTOR LENS

MODEL NO. LNS-W02/T02

LNS-W02K/T02K Series

Lens installation should be performed by the qualiﬁed service personnel.

It should be followed by this procedure precisely.

Before attempt to install the lens, conﬁrm the model number (both the LCD

projector and the lens) and use the proper lens.

If you have any questions, contact to the dealers.

Following checks and conﬁrmations should be taken for safety.

Check the following things by the time of the cabinet assembly after the

lens installation.

1. Conﬁrm the lens is securely ﬁxed by 4 screws.

2. Wiring must not be tangled in the gear of the lens motor or the other

mechanical part.

3. There is no missing part, or no loosing mounting part.

1AA6P1P2289-- (ICSC)

1 piece

6 screws (2 for spare)

1 piece

1 sheet

1 set

LENS REPLACEMENT AND

INSTALLATION PROCEDURE

LENS REPLACEMENT AND INSTALLATION PROCEDURE

Remove screws A (2 screws).

Pull down the lower lens cover while pushing

the part D, then remove it.

Remove screws B (2 screws).

Remove screws C (2 screws) and remove

upper lens cover.

1 5 Perform the steps for lens replacement and installation.to

Fig-1

Fig-3

●IN CASE OF MODEL WITHOUT LENS

Remove 2 screws and pull down the plate.

UPPER LENS COVER

LOWER LENS COVER

COVER PLATE

REMOVE THE LENS COVER.

(At the step , insert the light-block sheet in the same

position as the removed cover plate has been placed.

Two screws are not used.)

Use the light-block sheet included with lens.

REMOVE THE COVER PLATE OF THE LENS COVER. (See ﬁgure-3)

Set the light-block

sheet, so that the

large rounder side

is set over the lens.

SCREWS

LIGHT-BLOCK SHEET

Fig-2

LENS COVER

Remove 4 screws of the lens cover and

remove the lens cover.

First, set the lens at the center position with

lens shift button.

First check the shape of cabinet.

In case ﬁgure-1 cabinet.

In case ﬁgure-2 cabinet.

Produkt Specifikationer

Mærke:	Sanyo
Kategori:	Tilbehør til projektor
Model:	LNS-T02E
Vægt:	3100 g
Produktfarve:	Sort
Diameter:	130 mm
Kapabilitet:	PLC-HF10000L\nPLC-HF15000L\nPLC-XF1000\nPLC-XF47\nPLC-XF47A
Brændviddeområde:	158 - 221 mm
Blændeområde (F-F):	2 - 2.8
Zoomforhold:	1.4x