Sanyo POA-FIL131 Manual

Sanyo Tilbehør til projektor POA-FIL131

Læs gratis den danske manual til Sanyo POA-FIL131 (3 sider) i kategorien Tilbehør til projektor. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Sanyo POA-FIL131, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Filter Instructions

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes

clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup

and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to

replace the filter easily. The projector monitors the condition of the filter at all time and replaces a filter with a

new one automatically when it detects the clogging.

If the projector reaches a time set in the timer setting (p.

55), a Filter replacement icon (Fig.1) appears on the screen

and the WARNING FILTER indicator on the top panel lights

up (p.70). When you see this icon, replace the filter as soon

as possible (pp.29, 51) and reset the Filter counter (p.58). If

the filter is out of scroll and the projector reaches a time set

in the timer setting, Fig. 2 appears on the screen, indicating

that the filter cartridge replacement is necessary.

When the filter scroll is counted down to 1, the Last scroll

icon (Fig.3) appears on the screen, indicating that there is

one scroll left in the filter cartridge (p.55).

If the projector detects that the filter is clogged and no scroll

is left in the filter cartridge, a Filter cartridge replacement

icon (Fig. 4) appears on the screen and the WARNING

FILTER indicator on the top panel lights up (p.70). When you

see this icon, replace the filter cartridge (p.57) and reset the

Filter counter (p.58) and the Scroll counter (p.58).

When the filter is being scrolled using the remote control

(p.29) or the Filter control function in the setting menu

(p.51), a Filter replacement icon and “Please wait...”

message (Fig.5) appear on the screen and the WARNING

FILTER indicator blinks slow (approx. 2 seconds ON, 2

seconds OFF) (p.69).

The WARNING FILTER indicator blinks fast when the

projector detects an abnormal condition, the filter cartridge

is not installed properly, or the filter scroll is not working

properly (p.70).

Fig.1 Filter replacement icon

Fig.4 Filter cartridge replacement icon

Fig.3 Last scroll icon

Maintenance and Care

Note:

• Fig.1, Fig.2, Fig.3, Fig. 4 and Fig.5 will not appear when the

Display function is set to “Off” (p.48), during “Freeze” (p.28),

or “No show” (p.29).

• The filter cannot be rewinded.

• The filter can be scrolled 9 times since the filter cartridge

has 10 scrolls.

• The filter cartridge is disposable. Do not clean and reuse the

filter cartridge.

• Do not expose the filter cartridge to water or liquid, or it

may cause a breakdown.

• Replace the filter cartridge after all the scroll is used up. If

you replace the filter cartridge when there are some scrolls

left in the filter cartridge, the filter counter and the scroll

counter do not recognize the correct number of remaining

scrolls and the reset function cannot work properly. It may

cause a breakdown.

Fig.5 Filter replacement icon and

“Please wait...” message.

• Do not use the filter cartridge with other projector.The filter

counter and the scroll counter do not recognize the correct

number of remaining scrolls of the used filter cartridge and

the reset function cannot work properly. It may cause a

breakdown.

• Make sure that the projection lamp is turn off when you

are replacing the filter cartridge. If you replace the filter

cartridge when the projection lamp is turn on, the projector

will be shut down automatically for safety purpose

• Always reset the filter counter in the setting menu after

replacing the filter. If you forget to reset the filter counter,

the projector cannot recognize the correct number of

remaining scrolls and may cause a breakdown.

• Do not forget to reset the filter counter and the scroll

counter in the setting menu after replacing the filter

cartridge. If you forget to reset the filter counter and the

scroll counter, the projector cannot recognize the correct

number of remaining scrolls and may cause a breakdown.

Fig.2

Turn off the projector, and unplug the AC power cord

from the AC outlet.

First, clean up the dust on the projector and around the

air vents.

Press Von the filter cover to release the latch and open

the filter cover.

Put the new one back into the position and close

the filter cover. Make sure that the filter cartridge is

properly and fully inserted.

CAUTION

Make sure the filter cartridge is inserted in the

projector. If the filter cartridge is not inserted, the

projector cannot be turned on.

Do not put anything into the air vents. Doing so

may result in malfunction of the projector.

Reset the filter counter and the scroll counter (p.58).

Filter cover

Replacing the Filter Cartridge

Pull out the filter cartridge. When taking out the filter

cartridge, put your finger on the filter cartridge’s tab

and then pull. Latch

Filter cartridge

Tab

RECOMMENDATION

We recommend avoiding dusty/smoky environments when

operating the projector. Usage in these environments may

cause a poor image quality.

When using the projector under dusty or smoky conditions,

dust may accumulate on a lens, liquid crystal panels, or optical

elements inside the projector. Such condition may degrade the

quality of the projected image.

When the symptoms above are noticed, contact your authorized

dealer or service station for proper cleaning.

ORDER REPLACEMENT FILTER CARTRIDGE

Replacement filter cartridge can be ordered through your

dealer. When ordering, give the following information to the

dealer.

 OModel No. of your projector

PLC-XP100L/ PLC-XP100BKL

OReplacement Filter Cartridge Type No.

Service Parts No. 610 334 3747

Connect the AC power cord to the projector and turn

on the projector.

Maintenance and Care

Produkt Specifikationer

Mærke:	Sanyo
Kategori:	Tilbehør til projektor
Model:	POA-FIL131

Har du brug for hjælp?

Hvis du har brug for hjælp til Sanyo POA-FIL131 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tilbehør til projektor Sanyo Manualer

Sanyo POA-FIL131 Manual

1 September 2023

Sanyo LNS-S04 Manual

22 Juli 2023

Sanyo LNS-T02E Manual

2 November 2022

Sanyo LNS-T33 Manual

13 Oktober 2022

Tilbehør til projektor Manualer

Nyeste Tilbehør til projektor Manualer

Vogel's PPL 2035 Manual

23 Juli 2025

Mount-It! MI-429 Manual

17 Juli 2025

OmniMount STPA23 Manual

9 Juli 2025

OmniMount SCM-UA Manual

9 Juli 2025

OmniMount HDPJTMA Manual

9 Juli 2025

OmniMount SCM Manual

8 Juli 2025

OmniMount STPM21 Manual

8 Juli 2025

OmniMount CP24 Manual

8 Juli 2025

OmniMount PRO-PJT Manual

8 Juli 2025

Sony LMP-H160 Manual

4 Juli 2025