Seco-Larm MVE-AH010Q Manual

Seco-Larm AV forlænger MVE-AH010Q

Læs gratis den danske manual til Seco-Larm MVE-AH010Q (4 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Seco-Larm MVE-AH010Q, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

MVE-AH010Q

Extender for HDMI Over Dual Cat5e/6

Manual

 Extend HDMI over two Cat5e/6 cables

 Supports resolutions from 480i to 1080p with zero signal loss

 Transmits up to 1 60m) at 1080p over two Cat6 cables 97ft (

 Plug and play operation comes as a complete set –

ENFORCER Extender for HDMI over Dual Cat5e/6

2 SECO-LARM U.S.A., Inc.

Introduction:

The ENFORCER HDMI Extender over Cat5e/6 extends the range of HDMI by using a

transmitter and an active receiver to send video and audio over two Cat5e/6 cables.

HDMI Formats as high as 1080p can be transmitted up to 1 60m) between the two 97ft (

units with zero signal loss.

Features:

 Signal Strength nsmitter ensures that the signal strength will remain strong over –Tra

the length of the cable.

 Distance The HDMI Extender over Cat5e/6 is capable of providing a clear HDMI –

signal up to 1 (60m). 97ft

 Formats Supported The HDMI Extender over Cat5e/6 supports both progressive and –

interlaced formats: 1080p/1080i/720p/576p/576i/480p/480i.

 Plug and Play The HDMI Extender over Cat5e/6 comes as complete set consisting –a

of a transmitter, receiver, and power supply. No adjustments or settings must be made,

the unit is ready to use right out of the box.

 Zero Signal Loss Integrated circuits in the transmitter and receiver clean, buffer and –

amplify the HDMI signal to prevent signal loss and ensure a clear signal regardless of

the length of the cable.

Specifications:

Parts List:

1 x Transmitter (MVE-AH010Q-TQ)

1 x Receiver (MVE-AH010Q-RQ)

1 x 5VDC Power adapter

1 x Manual

Input video signal

0.5~1.0 Vp-p

Input DDC signal

5Vp-p (TTL)

Maximum single link range

1080p

Video formats supported

High-speed HDMI, HDCP 1.2

Audio formats supported

Dolby TrueHD, DTS-HD Master Audio

Output video

HDMI

Resolutions supported

1080p/1080i/720p/576p/576/i/480p/480i

Range 1080p –

Cat6: 1 6 97’ ( 0m); Cat5e: 98’ (30m)

Video amplifier bandwidth

6.75Gbps

Cat5e/6 Wiring standard

T568-B

Operating voltage

5VDC

Power supply

5VDC@1A (2.1mm plug)

Current draw

Transmitter

N/A

Receiver

400mA@5VDC

Operating temperature

23°~95° F (-5°~35° C)

Operating humidity

5~90% RH (no condensation)

Dimensions

33/16 ”x13/4”x7/8” (81x45x22mm)

Weight

8.7-oz (246g)

Produkt Specifikationer

Mærke:	Seco-Larm
Kategori:	AV forlænger
Model:	MVE-AH010Q

Har du brug for hjælp?

Hvis du har brug for hjælp til Seco-Larm MVE-AH010Q stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

AV forlænger Seco-Larm Manualer

Seco-Larm MVE-AH010Q Manual

29 August 2024

Seco-Larm MVE-AT11-01NQ Manual

29 August 2024

AV forlænger Manualer

Nyeste AV forlænger Manualer

Vivolink VLHDMIEXT60 Manual

16 September 2025

MuxLab 500451 Manual

16 September 2025

MuxLab AV/IR Pass-Thru Balun Manual

16 September 2025

MuxLab MonoPro XLR Manual

15 September 2025

AMX DXL-TX-4K60 Manual

14 September 2025

AMX CTP-1301 Manual

14 September 2025

StarTech.com 4K7012IC-EXTEND-HDMI Manual

14 September 2025

AMX HPX-AV102-RGB+A Manual

14 September 2025

WyreStorm MXV-0404-H2A-KIT Manual

12 September 2025

WyreStorm EX-1UTPIR100POH Manual

12 September 2025